Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Kettering
Gate parts and welding in Kettering usually comes down to one question: fix what’s there, or start over on the post? We’re Gatewood Fence & Gate, and Hal Gatewood has been answering that question honestly since 2001. If your gate drags on the ground off Far Hills Avenue, or your latch hasn’t lined up since winter, we’ll come look. The person who shows up is one of our own, background-checked, uniformed, and paid to fix things right the first time. Call (877) 610-2993 and a live person answers, day or night. Not a voicemail. Not a call center.
Why Gatewood Fence & Gate Is Kettering’s Preferred Gate Parts & Welding Company
Kettering homes are not like newer subdivisions. Most of them were built between the 1950s and 1970s, and a lot of the gates we see off streets like Far Hills Avenue and Wilmington Pike are still the originals. That’s not always bad news. Original steel can be welded. Original posts can be reset. What we don’t do is tell you to replace a gate that just needs a hinge, a post, or four inches of weld.
Hal’s name is on the shop and on every invoice. That’s the accountability that matters around here. We serve Kettering directly, with scheduling coordinated through our Ohio office. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. There’s no runaround in that sentence.
Our Gate Parts & Welding Services in Kettering
Hinge Replacement
Hinge failure on a Kettering gate rarely happens in isolation. The hinge itself may be worn, but the post it’s welded to is usually the root cause, especially on those original 2-inch steel posts set without concrete below the frost line. We cut out the old hinge, assess the post, and only replace what actually needs replacing. A typical hinge replacement in Kettering runs $120-$240 per hinge, including matching the hardware to the gate’s weight and swing.
Post Replacement
This is the big one for Kettering’s aging ranch neighborhoods. The original posts from the 1960s and 70s are often heaved out of plumb by a few inches, and no amount of weld rod will fix that. We excavate, pour a new footing below the frost line, set a new post, and weld the hinges back to true. Post replacement in Kettering typically runs $450-$900 depending on gate size and soil, and we will not weld a new hinge onto a post that’s still leaning. That’s how you pay twice for the same sag.
Rail Repair
Rails rot, rust, and snap at the weld points. On chain-link gates, the top rail takes most of the abuse, especially when frost heave twists the frame. On tube-steel gates, the bottom rail is usually the first to go. We cut out the bad section and weld in new stock. Rail repair in Kettering runs $180-$380 for most residential gates. If the frame is rusted through in more than two places, we’ll tell you so, and you can decide with the number in front of you.
Custom Welding
When a standard bracket or latch plate won’t work, we weld a custom one. That’s common in Kettering, because no two 50-year-old gates have sagged the same way. Whether you need a gate widened, a hinge relocated, or a custom latch plate for a gate that never closed right, we weld on site so the gate stays in your driveway. Custom welding runs $90-$180 per hour plus materials, and we quote the full price before the welder ever gets plugged in.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kettering
We work on the operators Kettering homes typically have, including Linear, Viking, Ghost Controls, and DoorKing. We don’t stock every board for every model, but we keep common parts local and order anything unusual fast. If you have an obsolete control board on a legacy swing or slide operator, we’ll tell you straight whether it can be repaired or should be replaced. Sometimes you can retrofit a newer board. Sometimes you can’t. Either way, you’ll know the cost before we touch anything.
Common Gate Parts & Welding Problems We See in Kettering Homes
- Heaved hinge posts: The clay-heavy glacial soils under Kettering expand and contract through every freeze-thaw cycle. After 50+ winters, posts set above the frost line move an inch or three. Repair starts with the post, not the gate.
- Dragging gates and missed latches: When one post heaves, the gate pivots off-level. The latch misses. The gate drags. Welding won’t fix geometry; excavation will.
- Obsolete control boards: Legacy LiftMaster and FAAC boards from the 1990s and early 2000s fail after decades of Ohio winters. Gates stick mid-cycle, sometimes with the motor live. That’s a safety issue, not an inconvenience.
- Rusted roller assemblies: Slide gates on older Kettering lots often have original rollers clogged with clay soil and rust. When rollers bind, the rack and pinion teeth skip under load. We replace rollers and realign the rack rather than just selling you a new operator.
Pricing for Gate Parts & Welding in Kettering, OH
Here’s what you can expect in Kettering. Hinge replacement: $120-$240 per hinge. Post replacement with a new frost-line footing: $450-$900. Rail repair: $180-$380. Custom welding: $90-$180 per hour plus materials. Roller and rack repair on slide gates: $200-$500. Every quote is given before any work starts, and the number on the invoice matches the number on the quote. We also give $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Kettering
Our Gate Parts & Welding crew covers Kettering and the surrounding communities, including Centerville, Moraine, West Carrollton City, and Bellbrook. If you’re nearby, we’ll come just the same. If you’re in Kettering, you already know where to find us.
Serving Kettering, OH - Our Local Coverage Area
We’re based in the Kettering area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Kettering
No, welding cannot fix a leaning post. Kettering’s clay-heavy, glacially deposited soil expands and contracts with every freeze-thaw cycle. Original 1960s posts were often set without concrete footings below the frost line, so after decades they heave out of plumb. The post has to be excavated, reset in a new footing below the frost line, and only then can hinges be welded back to true. If someone welds new hinges onto a leaning post, the gate will sag again within a year. Call (877) 610-2993 to have us look at the post before you spend anything.
Probably, and the intermittent failure is the telltale sign. Legacy boards on older Linear, Viking, DoorKing, and LiftMaster operators degrade over decades of Ohio freeze-thaw cycles. Capacitors dry out, relays stick, and boards fail unpredictably. We can test the board, and if it’s failing, we’ll give you a price for replacement or retrofit before any work starts. Sometimes a newer board drops into the same housing. Sometimes you’re better off replacing the operator. Call (877) 610-2993 and we’ll tell you which applies to your gate.
Yes, in most cases we can. Gates installed before UL 325 took effect rarely have entrapment protection, which is a real safety concern. We can add photocells at the gate’s vertical plane and, where the gate type allows, edge sensors that reverse on contact. If your operator is too old to accept retrofits, we’ll recommend replacing it with something that meets current standards. This is one repair we won’t shortcut. Call (877) 610-2993 to discuss your gate.
Check the post first. If the post is plumb and solid but the hinge is worn or its weld has cracked, hinge replacement is enough, around $120-$240 per hinge. If the post leans or has moved, no hinge will fix it. You need post replacement, typically $450-$900 in Kettering. The fastest way to know is to have us come look. Estimates are free. Call (877) 610-2993.
The usual fix is cutting out the rusted rail section and welding in new stock, around $180-$380 for most Kettering gates. If the frame is rusted through in multiple spots, or the pipes are paper-thin from decades of Ohio moisture, replacement becomes the cheaper answer. We’ll show you the damage and price both options before you choose. Call (877) 610-2993 and we’ll come out.
The Kettering Gate Problem Nobody Talks About
Kettering’s ranch homes, Cape Cods, and split-levels were built in a rush after the war, and the fencing went in the same way. A lot of 2-inch steel gate posts went straight into a dug hole with maybe a few shovelfuls of dirt, no concrete, and certainly nothing below the frost line. The builders weren’t lazy. It was just how it was done. Nobody expected those gates to still be standing 60 years later. But here they are. And every winter, the clay under Kettering freezes, expands, and moves the post a little more. Along streets off Far Hills Avenue and Wilmington Pike, we find hinge posts nearly three inches out of plumb. The gate still looks fine. It just doesn’t close anymore. That’s the problem. It’s invisible until the latch misses, and then it’s obvious.
We got a call to a 1960s ranch off Far Hills Avenue where the original chain-link swing gate was dragging on the ground and the latch hadn’t lined up in years. Our tech found the hinge post had heaved nearly three inches out of plumb, and the FAAC operator’s safety photocell was misaligned from the sag. We cut out the old post, poured a new footing below the frost line, welded new heavy-duty hinges, and reset the operator so the gate closes with entrapment protection working again. That’s the full fix. The homeowner had been chasing the latch for years. The gate wasn’t the problem. The post was.
Call Gatewood Fence & Gate for Gate Parts & Welding in Kettering
If your gate leans, drags, or won’t latch, call us at (877) 610-2993. Hal Gatewood has been fixing gates since 2001, and he’s not passing through. The name is on the shop, the address is published, and the person on the phone is a person. Free estimates, upfront pricing, and the 90-Day Done Right Promise on every job. Let’s get your gate closing right again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Kettering since 2001.