Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Hudson
Gate parts and welding in Hudson usually means one of three things: a hinge has failed on a heavy ornamental gate, a post has moved out of plumb from frost heave, or a weld has cracked and the gate now sags or scrapes. We handle all three, and we handle them on site. Hal Gatewood has been fixing gates since 2001, and the crew regularly works from 44236 up through 44237, from the estate lots off Hudson-Aurora Road to the older properties near the historic town center. Call (877) 610-2993 and a live person answers, any hour.
What makes Hudson different from Stow or Cuyahoga Falls is the weight of the gates themselves. Estate homes built through the 1980s to 2000s along the large-lot corridors carry ornamental steel and aluminum swing gates paired with operators like Viking, DoorKing, and Linear. A light chain-link gate can tolerate a little post movement. A 600-pound ornamental gate cannot. That’s where our Gate Parts & Welding work starts: with the post, the hinge, and the weld, not with a parts catalog.
Why Gatewood Fence & Gate Is Hudson’s Preferred Gate Parts & Welding Company
We’re the shop that fixes what other outfits want to haul away. Most companies that touch an ornamental gate will quote a full replacement before they’ve even looked at the hinge post. We don’t. The name is on the shop, Hal’s license number is published, and if you call us back under the 90-Day Done Right Promise, Hal comes back himself. That’s the whole arrangement, written on every invoice.
Hudson homeowners tend to be skeptical of big franchises, and we understand why. You’ve been quoted one price on the phone and handed another at the door. We quote upfront, in writing, agreed before any work starts. No trip charge inside the county. $40 off any repair over $200. Seniors and veterans get a permanent 10% discount. Those aren’t promotions we run in February. They’re standing offers, the same this year as last.
Our Hudson customers see the difference when we show up in a marked truck, in uniform, and the person who answers the phone at 2 a.m. is the same person who runs the company. Hal has been at this since 2001. His address is public. You can drive to the shop and look him in the eye. That matters in a town like Hudson.
Our Gate Parts & Welding Services in Hudson
Hinge Replacement
Hinges fail before anything else on a heavy gate. We see it constantly on the ornamental steel swing gates along Hudson’s estate corridors: the top hinge weld cracks, the gate drops a half inch, and suddenly it scrapes the driveway every spring. We replace hinges with heavier-duty barrels than what the original installer used, and we re-tension them so the gate hangs true. In Hudson, where freeze-thaw movement stresses every connection point, a hinge replacement almost always starts with checking the post itself. Fix the hinge without the post and you’ll fix it twice.
Post Replacement
A gate sags in the hinge post, not in the middle. That’s the first thing we tell Hudson homeowners. When frost heave shifts a post out of plumb, the whole gate follows. We dig the old footing, set a new post at proper depth, and weld or bolt the gate back to it. On a large-lot estate off Hudson-Aurora Road, we replaced a failed hinge post on a heavy ornamental steel swing gate with a Viking operator. Frost heave had pulled the post 1.5 inches out of plumb, binding the hinge and snapping the top hinge weld. We cut and re-welded the rail, set a new 4-foot-deep post footing with rebar, and re-tensioned the hinges so the gate swung silently without tripping the safety photocell. That’s the standard, not the exception.
Rail Repair
When a bottom rail rusts through or a top rail snaps, the gate’s structure is compromised. We cut out the bad section, weld in new steel or aluminum to match, and grind it smooth so the repair disappears. Hudson’s lake-effect moisture accelerates rust on iron gates, especially where snow piles against the post all winter. We see rust-through on rail ends and hinge barrels more often here than in drier inland towns. The repair has to address the moisture trap, not just the hole.
Custom Welding
Sometimes a gate needs a panel that matches what was installed twenty years ago. We weld custom ornamental panels on site, in the driveway, matched to the existing design. No hauling your gate to a shop. No “close enough” patch. Hal welds it himself and stands behind the work with the 90-Day Done Right Promise. For Hudson’s older Western Reserve Colonials and Federal-style homes near the historic center, a matched repair is often the only option that fits both the gate and the character of the property.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hudson
We’re certified to service nine major gate brands, and in Hudson we see a lot of Viking, DoorKing, and Linear operators paired with heavy ornamental gates. We stock common parts for these brands locally, which means a hinge, roller, or latch repair doesn’t wait a week for shipping. When an automated gate fails, it’s usually the operator or the mechanical parts, not both. We diagnose before we replace, and we don’t swap parts that don’t need swapping. That’s the repair-first philosophy Hal’s run since 2001.
Common Gate Parts & Welding Problems We See in Hudson Homes
- Frost heave shifts heavy ornamental posts out of plumb. Hudson’s hard freeze-thaw cycling from November through March moves the ground enough to crack concrete footings and bind hinges on estate gates. The gate grinds against the operator, or stops closing altogether.
- Lake-effect moisture accelerates rust on iron welds and hinge barrels. Snow piles against the post, melts, refreezes, and the moisture sits there for months. We see rust-through on bottom rails and hinge barrels faster here than in drier towns further south.
- Historic District gates fail from deferred maintenance. Homeowners near the downtown core sometimes put off repairs because they worry a weld-on part will trigger Design Review. It usually won’t, but the delay lets a small hinge problem become a snapped rail and a dropped gate. We’ll talk you through what actually requires approval before you spend a dollar.
- Slide gates jump the track after winter. On Hudson’s larger estate lots, slide gates ride on rollers that wear unevenly when the track has shifted. A gate that jumps the track may need a roller swap, a weld repair on the rail, or both. We assess it on site and quote the actual fix.
Pricing for Gate Parts & Welding in Hudson, OH
Gate parts and welding pricing in Hudson runs a real range because the gates themselves run a range. Here’s what we typically see:
- Hinge replacement on an ornamental steel gate: $180-$340 per hinge, including on-site welding and re-tensioning.
- Post replacement with new concrete footing: $650-$1,400 depending on gate weight, post depth, and whether we’re resetting an automated operator.
- Rail repair with cut-and-weld steel or aluminum matching: $220-$520 per rail section.
- Custom ornamental panel fabrication and welding: $400-$900 per panel, matched to existing design.
- Slide gate roller replacement: $140-$280 per roller set, including track inspection.
The price we quote is the price you pay. Agreed before any work starts, in writing. Call (877) 610-2993 for a free estimate on any of these repairs, and ask about the $40 off any repair over $200.
We Also Serve Cities Near Hudson
We work throughout this corner of Summit County, including Stow, Cuyahoga Falls, Munroe Falls, and Tallmadge. If you’re in any of those towns and your gate is sagging, binding, or jumping the track, call the same number: (877) 610-2993. A live person answers, day or night.
Serving Hudson, OH - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Hudson
Almost always, yes. The hinge post is the first thing to check when an ornamental gate sags in Hudson. Frost heave through the winter shifts the post out of plumb, the top hinge binds, and the gate drops. Replacing the hinge without addressing the post fixes it for a season, then it sags again. We check the post first, every time. Call (877) 610-2993 and we’ll tell you what we find, free.
We can weld a custom ornamental panel to match your existing gate. Hal fabricates the panel on site, matches the picket pattern and rail profile, and grinds the welds smooth before finish. It’s a repair, not a patch job. On Hudson’s older homes near the center, a matched panel often looks better than a replacement gate that doesn’t fit the house. Call (877) 610-2993 and describe what you’re working with.
It depends on whether the track shifted or the rollers wore out, and in Hudson it’s often both. If the rail itself has cracked or the track has moved, welding is needed. If the rollers are flat-spotted or the bearings are shot, a roller swap fixes it. We assess it on site, show you what we find, and quote the actual repair before starting. Call (877) 610-2993 for a free estimate.
No. Replacing a gate hinge or welding a broken rail is a repair, not a replacement, and Hudson’s Historic District Design Review guidelines apply to replacements and new construction on contributing properties, not to like-for-like maintenance. If your gate is a full replacement near the downtown core, you may need approval first. We’ll tell you before any work starts. Call (877) 610-2993 and we’ll walk you through it.
For a heavy ornamental gate in Hudson, the post footing should be 4 feet deep with a rebar cage and proper drainage. That gets below the frost line in Summit County and keeps the post stable through freeze-thaw cycles. Shallow footings are the number one cause of gate post heave we correct locally. We set them at 4 feet on every heavy gate post replacement. Call (877) 610-2993 for an exact quote on your gate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Hudson
If your gate sags, scrapes, jumps the track, or won’t close, call (877) 610-2993. A live person answers, any hour. We’ll quote the repair upfront, in writing, before any work starts. Hal’s name is on the shop, the shop’s down the road, and the work is guaranteed for 90 days, in writing. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hudson since 2001.