Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Access Control Across Hudson
Gate access control in Hudson, OH typically runs $450-$1,850 for a keypad, card reader, phone entry, or video intercom installed on an existing automatic gate, with most work completed in a single visit. A full system that ties a gate operator, intercom, and mobile access together on an estate property usually lands between $2,200 and $5,400. We schedule Hudson jobs every weekday and answer the phone 24/7 at (877) 610-2993, which matters when a gate will not open and you’re stuck in a driveway on Darrow Road at 6:40 on a Tuesday morning.
We know Hudson specifically: the big estate lots off Streetsboro Road, the tight historic streets near the town center north of Main Street, the shared driveways where two or three homes ride one gate. That local knowledge changes how we wire a loop detector, mount a keypad on a stone pier, or set the closing force on a heavy ornamental gate. Our Gate Access Control work always starts with how the gate actually gets used on your property, not a generic install checklist.
Why Gatewood Fence & Gate Is Hudson’s Preferred Gate Access Control Company
Hal Gatewood has owned this company since 2001. His name goes on every invoice. The shop has a published address and a license number anyone in Summit County can look up, and the person who answers the phone at midnight is the same person who will show up in Hudson for Gate Repair - Hudson. That is the oldest accountability there is.
Hudson homeowners have a particular way of vetting contractors. You ask a neighbor. You look at the address. You want someone you’ll run into at the True Value or Heinen’s on West Streetsboro. We’re that company, because we’re down the road, not three states away. When a Viking operator on a five-acre lot off Barlow Road fails, the last thing you want is a national outfit reading a script about dispatch windows. You want Hal on the phone and a truck rolling toward 44236 or 44237.
Beyond the phone, the work carries a written 90-Day Done Right Promise. If a keypad install, wiring splice, or photo eye alignment is not right, one call brings us back. No arguing. No “in most cases” language. It’s stamped on the paperwork. For Hudson’s heaviest estate gates, that promise is why word of mouth has carried this company for over 29 years.
Our Gate Access Control Services in Hudson
Keypad Entry
Keypad entry systems in Hudson run $450-$1,100 installed, depending on whether we’re tying into an existing Viking or LiftMaster operator or adding a stand-alone receiver. On Hudson’s older brick piers near the historic core, we pay extra attention to the mount: snowmelt working behind a surface-mounted keypad will eventually short it, so we seal everything with a proper gasket and silicone bead, not the thin foam tape that comes in the box. For an estate gate on a corridor like Stow Road or Ravenna Road, we program separate codes for family, lawn crews, and delivery drivers so you can see who’s been through without handing out remotes to everyone.

Remote Control
Adding or reprogramming remotes is the most common access control call we make in Hudson, usually because a homeowner bought a universal remote at a big-box store and it will not pair with the operator. We carry transmitters and receivers for FAAC, BFT, Linear, Viking, and several other brands, so most remote programming is done in one trip. On shared driveways, we often set up individualized remote codes per household so one neighbor’s lost clicker doesn’t leave everyone locked out.

Phone Entry
Phone entry systems let a visitor call your cell phone from the gate and you tap a number to open it. Hudson’s estate properties use this heavily because a gate with a quarter-mile driveway is not a walk-up-door situation. A basic single-line phone entry unit in Hudson runs $750-$1,400 installed. We wire them to the operator and set up the relay on a separate zone so a delivery driver’s call does not drop the wrong gate contact. This is the one upgrade that removes the “what’s the gate code” text thread entirely.

Card Reader
Card reader and fob-based entry runs $600-$1,500 in Hudson, depending on whether you need a standalone reader or a full controller tied into your gate operator and vehicle loop. On a shared driveway off Darrow Road, we wire a separate output per household so each card only works its own zone. For Hudson properties with guest houses or long-term tenants, a card reader is simpler than managing six codes in a keypad, and it gives you a log of when the gate opened, which a keypad does not.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Gate Access Control Problems We See in Hudson
- Frost heave shifting post footings. Hudson’s soil does a hard freeze-thaw dance from November through March, and on a slide gate, that heave is enough to knock the post out of alignment so the rack and pinion binds and strips teeth. The access control side then looks broken because the operator won’t receive the “gate closed” signal, but the real fix is the post, not the keypad.
- Loop detectors wired into the wrong zone on shared driveways. A shared gate where one household’s cars trigger the exit loop but the other household’s vehicles get ignored is a common Hudson call. The detector was installed without considering which side of the gate each home approaches from. We rewire to separate zones and often add a second detector so the gate holds for the right vehicle.
- Waterlogged keypad housings on historic stone piers. Properties near Hudson’s Historic District often have stone or brick pillars supporting the gate. Repeated snowmelt and rain against those piers kills a surface-mounted keypad fast. We cut in a recessed weather housing and run the wire through the back rather than down the face, which stops the short.
- Solar openers on wooded lots with no direct sun. Hudson has plenty of mature trees, and we regularly find solar-charged gate operators on shaded lots that never get a full charge. A video intercom or keypad with a constant-draw receiver will drain the battery in a week. We resize the panel, add a battery bank, or run a low-voltage line from the house, depending on which the lot actually needs.
Trusted Brands We Service in Hudson
We service, repair, and program operators and access control from FAAC, BFT, Linear, and Viking, plus most other gate automation brands. For Hudson customers, that means we’re not telling you to rip out a ten-year-old Viking slide operator because we don’t know how to work on it. We do. We carry common parts in our vehicles: loop detector modules, keypad housings, photo eye kits, plug-and-play receivers. Most access control service calls in Hudson are one visit because the truck already has what the gate needs.
Pricing for Gate Access Control in Hudson, OH
Here is the straight pricing picture for Hudson. A keypad install runs $450-$1,100. Remote control programming or replacement is $120-$260 for a single visit, less if it’s part of a larger repair. Phone entry systems land between $750 and $1,400. Card readers run $600-$1,500. A video intercom with a wired monitor inside the house runs $900-$2,100. A full system that includes a new gate operator, loop detector, photo eyes, and keypad or intercom typically lands at $2,200-$5,400.
Those are the numbers, quoted before the work starts and agreed on paper. We never quote one figure on the phone and a different figure at the door. We also do not charge a trip charge inside the county, and any repair over $200 gets $40 off. Seniors and veterans get a permanent 10% discount. Call (877) 610-2993 and ask for Hal, and you’ll get a real number for your exact setup.
How Hudson’s Historic District Affects Gate Access Control
This is the thing no one tells Hudson homeowners, and it catches a lot of out-of-town techs flat-footed. Hudson’s Historic District Design Review guidelines cover properties near the town center, and on a contributing structure, a gate replacement, not just a repair, may require aesthetic approval before installation. Adding a card reader or video intercom to an existing gate usually does not trigger review, because it’s a modification to a mechanical system rather than a change to the gate’s appearance. But if you’re replacing a gate or mounting a new intercom pedestal in a prominent front-yard location on Aurora Street, College Street, or anywhere in the historic overlay, assume the design board wants to see it first. We also handle Hudson Gate Installation that complies with these guidelines. We have worked through those approvals enough to know what gets flagged: bright metal boxes on brick piers, surface-mounted conduit across stone, anything a board member will call “visually intrusive.” We plan for that from the first walkthrough instead of getting stopped mid-job.
Shared Driveways and Tight Hudson Sites
Hudson’s large-lot corridors create a layout you rarely see in Stow or Cuyahoga Falls: two or three homes sharing a single long driveway with one gate at the street. Those gates have to work for every household, every day, and they tend to see two or three times the cycles of a single-family gate. The access control has to be built for that. Separate user codes or cards per household. Loop detectors zoned by approach direction. A hold-open time long enough for a second car but short enough that the gate is not sitting open at night. On a shared driveway off Stow Road, our crew retrofitted a Viking slide gate with keypad entry and a loop detector for a homeowner whose post footing had heaved from freeze-thaw. We realigned the hinge post, installed a new rack and pinion, and added a safety photocell so the operator would pass UL 325 entrapment protection, all while keeping pedestrian access open during the work. That job took one afternoon because everything came off our truck.
Tight Hudson sites, especially near the town center and in older subdivisions, often mean a swing gate will not fit a narrow apron or a short setback. A slide gate with a compact operator and a surface-mount keypad solves that. We stock slide gate kits in multiple lengths and can order a custom rail for an odd-width opening without pushing the job weeks out.
Video Intercom for Hudson Estate Gates
A video intercom is the single best upgrade for a Hudson property with a long driveway. The visitor presses a button, your kitchen monitor or phone rings, you see who is there, and you open the gate from inside. On a three-acre lot where the gate is four hundred feet from the house, that saves a lot of walking in January. Hudson installs run $900-$2,100 for a wired system with an indoor monitor, or $650-$1,500 for a mobile-based unit that calls your phone over Wi-Fi or cellular. The wired version holds up better on wooded lots where cell signal is weak, and we will tell you that honestly before you spend.
On Hudson properties with stone or brick pillars, we run the wire through the back of the pillar instead of across the face, so the intercom looks like it belongs there, not like an afterthought bolted to the front. That detail matters to the same homeowner who chose Hudson for the house in the first place.
We Also Serve Cities Near Hudson
If you’re in Stow, Cuyahoga Falls, Munroe Falls, or Tallmadge, the same crew and the same 90-Day Done Right Promise apply. We run these roads every week, and we know the gate wiring, soil, and subdivision layouts across northern Summit County. You’re welcome to read more about what we do across Hudson and the surrounding communities.
Serving Hudson, OH - Our Local Coverage Area
We’re based in the Hudson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hudson
For most Hudson properties, no. Adding a card reader, keypad, or video intercom to an existing automatic gate is a mechanical modification and typically does not require Historic District Design Review approval. The exception is if you’re replacing the gate itself, adding a new freestanding intercom pedestal in a front yard, or working on a property designated as a contributing historic structure, where the review board may want to see the proposed changes before installation. We know which streets fall under which overlay and will check before you spend a dollar. Call (877) 610-2993 and we’ll walk you through it.
Frost heave is the culprit. Hudson’s soil freezes and thaws in cycles from November through March, and each cycle can raise or settle a post footing by a quarter inch or more. On a slide gate, that misalignment makes the rack and pinion bind, which is why you hear that grinding, tooth-jumping sound when the gate moves. The fix is realigning the post and re-tensioning the rack, not just replacing the gear. Do the gear only and you’ll be back in the same spot next spring. We correct the post, remount the rack, and set the operator torque correctly, and the gate stops eating teeth.
Yes. On most Hudson shared driveways, we run the project in stages so the gate is never locked open or locked closed for a full day. We remove the old operator, mount the new one, wire the new keypad, and switch the loop detectors one at a time, then swap the power feed and do a full UL 325 safety test. That includes testing the Gate Motor & Opener in Hudson under load. For vehicle access, the gate usually misses no more than a few hours. For pedestrian access, we keep a walk gate open the entire time, as we did on a shared driveway off Stow Road where we retrofitted a Viking slide gate while a family kept their normal in-and-out all afternoon.
The post gets cut or excavated and re-set, depending on how bad the lean is and whether the concrete footing is cracked. A sags in the hinge post, not in the middle, and that is where we start. On a heavy ornamental gate, we’ll support the gate with a jack stand, re-set the hinge post in new concrete, and re-hang the gate so the reveal is even top and bottom. Then we adjust the operator’s force and limit so it is not fighting a misaligned hinge. That repair on a Hudson estate gate typically runs $600-$1,600 depending on post size, soil, and whether we’re rebuilding a stone pier or a steel post. Get an exact price before we start by calling (877) 610-2993.
It will not keep a constant-draw device powered. Solar openers on shaded lots in Hudson’s 44236 and 44237 ZIP codes are a regular source of dead keypads and video intercoms, because the panel never gets enough direct hours to recover from the drain. Fixing it means one of three things: adding a second or larger panel on a sunnier post, installing a battery bank sized for the draw, or running a low-voltage line from the house. We’ll test the panel output and the nightly draw before recommending any of them, so you don’t buy a bigger solar panel for a problem that’s actually a buried wire.
Call Gatewood Fence & Gate for Gate Access Control in Hudson
If you have a gate in Hudson that will not open, a keypad that quit after a February thaw, or a shared driveway where one household’s remote stopped working, call (877) 610-2993. A live person answers, not a voicemail. You’ll get a straight answer, an honest price range before any work starts, and a written quote agreed on before anything is installed. That’s how Gate Access Control work should be done, and it’s how we’ve done it in and around Hudson for a long time.
Written by Hal Gatewood, owner of Gatewood Fence & Gate, serving Hudson since the company’s founding in 2001.





Before
After
Before
After
Before
After