Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Highland Village
If you’re looking for gate parts and welding in Highland Village, TX, we’ll tell you straight: most of the gates in this city fail for two reasons tied directly to where Highland Village sits. Lake humidity eats hinges and rollers. The clay soil heaves posts out of plumb. That’s the diagnosis on 8 out of 10 jobs we run between the lakeside streets and the east side neighborhoods. Gatewood Fence & Gate has been repairing and welding gates since 2001, and we do the work on site in your driveway, not hauled back to some shop across the county. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Highland Village’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. That matters in Highland Village, where upscale HOA communities line the northern shore of Lake Lewisville and homeowners have been burned by outfits that quote one number on the phone and present another at the door. We don’t do that. The price is quoted and agreed before any work starts. Always.
When a Highland Village gate sags, our crew looks at the hinge post first, not the middle of the gate. That’s a habit that comes from working hundreds of driveways in 75077, where ornamental steel and wrought-iron gates are the standard. We know what those 20-to-30-year-old swing gates do as their operators age out. We know what the clay does to post footings. And when a lakeside gate is rusting through at 14 years old, we know the fix isn’t another set of powder-coated hinges from a big-box shelf. It’s hot-dip galvanized or stainless, put in by someone who welds.
Highland Village homeowners also get something simple from us: a live person on the phone, 24/7. Not a voicemail. Not a call center three states away. And every job carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back, no runaround.
Our Gate Parts & Welding Services in Highland Village
Hinge Replacement
Hinges on lakeside Highland Village gates take the worst of it. Ambient humidity off Lake Lewisville accelerates rust and paint failure, and we routinely replace hinges that have rusted through on gates only 12 to 15 years old, especially on the western edge near the shoreline. We carry heavy-barrel, sealed-bearing, hot-dip galvanized and stainless hinge stock that stands up to that environment. A hinge replacement in Highland Village typically runs $185 to $420, depending on gate weight and whether we’re doing one hinge or the full set.
Post Replacement
Highland Village sits on expansive clay that cracks hard in summer drought and swells after fall and spring rains. That shrink-swell cycle tilts gate posts seasonally, which is why a gate sags in the post, not in the middle. We dig out the old footing, set the post deeper with proper concrete, and weld the gate back square. Post replacement in Highland Village runs $300 to $700 for a standard steel or ornamental iron post, more if the post sits in heavy clay and we need to go deeper. We’ll quote the depth before we cut the concrete.
Rail Repair
Top and bottom rails take stress from the gate’s own weight, and here in Highland Village the ice storms add weld fatigue at hinge points. Sheet ice coats gate hardware during North Texas storms, and the freeze-thaw cycle stresses welds at hinge points every winter. We cut out the failed section, weld in new material, and reinforce the joints so the gate runs true. Rail repair work ranges from $145 for a small repair weld to $500 for a full rail section with paint and prep.
Custom Welding
Highland Village HOAs near Lake Lewisville often write ornamental iron and steel gate requirements right into the covenants. If a section of scrollwork cracks or a post breaks at the base, we weld it on site to match the original. We can also fabricate matching pickets, finials, and inset panels to keep the gate consistent with your HOA’s aesthetic standards. Custom welding starts around $100 per hour and the quote is agreed on before we strike an arc.
And if a part needs replacing rather than welding, our Gate Parts & Welding team stocks or sources hinges, rollers, latches, locks, chain link fittings, and gate operators. We’d rather repair than replace, but when a part is gone, we don’t say “we’ll order it” and disappear.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Village
Our crew is certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Highland Village, we see a lot of FAAC and BFT hydraulic operators on the heavier ornamental swing gates in HOA communities, and Linear and Viking on the sliding driveway gates. We keep common parts on the truck so we’re not making you wait on a shipping number. If your opener is binding, not reading its limits, or not reversing when it should, we’ll tell you exactly what’s wrong and what the fix costs before we touch the panel.
Common Gate Parts & Welding Problems We See in Highland Village Homes
- Rust-through on lakeside gates. On streets near the Lake Lewisville shoreline, we routinely find hinges and bottom rollers rusted through on gates that are only 12 to 15 years old. The same hardware on the drier east side of Highland Village might last another decade. When we’re out there, we’ll show you the difference and recommend hot-dip galvanized or stainless steel replacements that cost a little more up front and save a lot down the road.
- Post lean and gate misalignment from clay soil. Highland Village’s expansive clay soils heave and shift gate posts every season. You’ll see the gate start dragging or the latch bolt miss the strike plate by half an inch. We reset the post and weld the alignment right, because fixing the panel without the post means you’ll fix it twice.
- Weld fatigue at hinge points after ice storms. North Texas ice storms coat gate hardware with sheet ice, unlike the simple freeze events further south. That ice adds hundreds of pounds of load, and the freeze-thaw cycle flexes welds until they crack. We see this pattern every spring across Highland Village. The fix is a re-weld with proper penetration and gusset reinforcement where needed.
- Worn gate rollers and latch hardware. On automated sliding gates, the rollers take constant load on the track, and lake humidity accelerates wear on the bearings. When rollers bind or flatten, the gate runs rough and the motor strains. We replace rollers, service the track, and adjust the opener so it isn’t fighting its own hardware. Latch and lock replacement is usually a same-visit fix for a few hundred dollars depending on hardware style.
Key Takeaways
- Highland Village gates face a specific double threat: lake humidity corrosion and clay-soil post movement.
- We weld on site, so your gate stays in your driveway while we work on it.
- Every job comes with the 90-Day Done Right Promise in writing.
- A live person answers the phone 24/7. No voicemail, no call center.
- You’ll get the price up front and agreed on before any work begins.
Pricing for Gate Parts & Welding in Highland Village, TX
Here’s what we typically see across 75077. Hinge replacement in Highland Village runs $185 to $420. Post replacement sits at $300 to $700 for most residential gates. Rail repair is $145 to $500 depending on the extent of the weld. Custom welding starts around $100 per hour, and full custom gate fabrication is quoted by design and materials. What drives cost here? The clay soil means posts sometimes need deeper footings, and lakeside gates more often need upgraded galvanized or stainless hardware. Either way, you’ll know the number before we start. No estimate that changes at the door. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a straight quote.
We Also Serve Cities Near Highland Village
Our crews work throughout Denton County. If you’re in Flower Mound, Lewisville, Lake Dallas, or Corinth and your gate is failing, we’ll come out the same way we do for Highland Village: on time, with the truck stocked, and the price agreed up front. See how Gate Parts & Welding in Highland Village residents get their gates fixed, then call us from wherever you are.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Highland Village
Lake Lewisville humidity accelerates rust and paint failure on ornamental iron and steel gates, especially on the western edge near the shoreline. We routinely replace rusted-through hinges and bottom rollers on gates only 12 to 15 years old in Highland Village, which is a corrosion timeline we don’t see on the drier east side. The fix is hot-dip galvanized or stainless steel hardware that stands up to lakeside moisture. Call (877) 610-2993 and we’ll inspect your hinges and rollers for free.
Yes. This is the most common gate problem we see in Highland Village. The clay shrinks and swells through the year, tilting posts out of plumb and binding automated gates in their tracks. We dig out the old footing, set the post deeper, and weld the gate back square. The gate stays in your driveway the whole time. Call us for a free estimate and we’ll price it before we cut concrete.
It’s usually the post. A gate sags in the hinge post, not in the middle, and in Highland Village’s clay soil that post is moving every season. We’ll check the post plumb first, then the hinge wear. If the post is the culprit, resetting it fixes the sag. If the hinges are rusted or worn, we replace them with sealed-bearing galvanized hardware. Either way, we’ll show you what’s wrong before we touch it.
We do. Our crew is certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Highland Village, FAAC and BFT hydraulic operators are common on the heavier ornamental swing gates in HOA communities. If your operator is binding, not reading limits, or not reversing, we’ll diagnose it on site and give you a price before we start. Call (877) 610-2993 and a live person will answer.
Yes. Highland Village HOAs often require ornamental iron or steel gates for aesthetic consistency, and we weld custom pieces to match existing designs, including scrollwork, finials, and inset panels. For a full custom gate, we’ll come out, take measurements, and give you a written price. Fabrication and installation are separate from the rush jobs, so we’ll schedule it properly. Estimates are free.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Village and Denton County since 2001.
If your gate is sagging, rusting, or dragging in Highland Village, call (877) 610-2993. A live person answers, 24/7. We’ll get you an honest price, and we’ll put it in writing before any work starts. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.