Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Highland Village
Gate motor and opener repair in Highland Village usually means one of two things: a swing gate that’s binding because the post has shifted out of plumb, or an operator that’s rusting from lake air. Either way, we fix it in the driveway, not a shop across town. Hal Gatewood has been Highland Village Gate Repair since 2001, and his crew works Highland Village streets every week, from Highland Shores Boulevard down to the lakeside cul-de-sacs that eat gate hardware faster than anywhere else in Denton County. Call (877) 610-2993 and a live person answers, day or night.
Key takeaways:
- We service Highland Village gate motors same day in most cases, often within a few hours of your call.
- Repair first, replace only what’s actually failed. On-site welding keeps your gate in your driveway.
- Every job carries the 90-Day Done Right Promise in writing. Not a verbal promise. Written.
- Upfront pricing agreed before any work starts. You approve the number, then we touch a wrench.
Why Gatewood Fence & Gate Is Highland Village’s Preferred Gate Motor & Opener Company
Highland Village homeowners don’t have time for a national outfit that sends a different subcontracted tech every visit. They want a name they’ll see again at the grocery store on Justin Road. That’s us. Hal’s name is on the shop, his address is published, and his license number is visible to anyone who wants to look it up. No voicemail tree, no call center. If you call at 2 a.m., a real person picks up.
We’ve built our Highland Village reputation on showing up when we said we’d show up and fixing the actual problem. Homeowners here tend to have ornamental iron driveway gates that were installed when the neighborhood was built in the 1990s and early 2000s. Those operators are hitting end-of-life together. We see the same LiftMaster and Viking units every week. We know which ones can be repaired and which ones are done. That saves you money, because we won’t sell you a motor when a hinge post is the real culprit.
No trip charge inside the county. $40 off any repair over $200. A permanent 10% discount for seniors and veterans. Those aren’t haggling points. They’re standing offers.
Our Gate Motor & Opener Services in Highland Village
We handle the full range of gate motor and opener work across Highland Village’s 75077 zip code. Here’s what that actually looks like:
Motor Installation
A new gate motor in Highland Village runs $1,600 to $3,800 installed, depending on gate weight, operator type, and whether we’re running new conduit for power and safety edges. We install operators on existing ornamental iron gates and on new gates we weld and hang ourselves through our Highland Village Gate Parts & Welding service. Before any installation, we measure the gate leaf, check the post footings for lean, and confirm the electrical run. You get a written price before we order a single part.
Motor Repair
Most motor repairs in Highland Village are $180 to $520. That covers control boards, limit switches, capacitor replacements, gearbox rebuilds, and sensor alignment. We repair what’s repairable. A motor that another company would condemn for a rusted limit switch gets a new limit switch from us, not a four-figure invoice for a whole new operator. Hal will tell you straight if a repair isn’t worth it.
Linear Motor Repair
Linear motors on sliding gates are common on Highland Village’s larger estate lots, where a swing gate would eat too much driveway space. Linear motor repair here typically runs $220 to $550 for sensor faults, rack alignment, belt tension, or brush replacement. Lake humidity corrodes the rack teeth and guide rails on these units faster than inland, so we routinely swap in stainless or coated hardware to slow the cycle down. Our Gate Motor & Opener team knows the failure points on Linear models by heart.
Slide Motor Repair
Slide gate motors in Highland Village are often asked to move a 600-pound iron gate across a track that’s been sitting in clay-heavy soil for 25 years. When the track heaves or fills with silt from rain runoff, the motor strains and burns out limit switches. Repair typically runs $200 to $480. We check track level, clean rollers, and re-set the rack mesh before condemning any motor. Most slide motor failures here trace back to the track, not the motor itself.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Village
We’re certified to service nine major gate brands, and the ones we see most often in Highland Village are Viking, Ghost Controls, DoorKing, and Elite. These were the go-to operators for builders in the planned communities around Highland Shores and Lakeside Highlands during the 1990s and 2000s. We keep common Viking and DoorKing parts on our trucks so we’re not waiting on a warehouse shipment when your gate is stuck open. If the part is unusual, we source it fast and tell you the lead time before we quote the job.
Common Gate Motor & Opener Problems We See in Highland Village Homes
- Lake-humidity rust on hinge post brackets: Homes within a half-mile of the Lake Lewisville shoreline see hinge brackets rust through in 12 to 15 years. The gate leaf sags, the operator fights extra weight, and the motor faults. We see it constantly on the west side of Highland Village and almost never on identical gates in Flower Mound.
- Expansive clay heaving gate posts: Denton County’s Blackland-adjacent clay shrinks hard in summer and swells after fall rains. That seasonal cycle tilts gate posts out of plumb, which twists the gate frame and strips teeth off the operator’s rack and pinion. This is the single most common repair driver in Highland Village.
- North Texas ice storm stress on hinge welds: When sheet ice coats a gate, it adds hundreds of pounds of load. Hinge welds that survived 20 years can develop micro-cracks. Those cracks fail later when the post shifts, and the operator suddenly can’t hold the gate.
- Original 1990s-era operators hitting end-of-life: The automated swing gates installed across Highland Village’s HOA neighborhoods when those homes were built are now 20 to 30 years old. Control boards fail, gearboxes strip, and capacitors dry out. We repair what’s repairable and replace what isn’t, with an honest explanation either way.
Pricing for Gate Motor & Opener in Highland Village, TX
Here are the real numbers for Highland Village’s market, not national averages:
- Motor repair: $180 to $520 depending on the failed component
- Motor installation: $1,600 to $3,800 installed, including operator, mounting, and electrical connection
- Linear motor repair: $220 to $550
- Slide motor repair: $200 to $480
- Battery backup installation: $350 to $800 depending on operator compatibility
- Intercom and camera entry integration: $400 to $1,500 depending on system scope
The price we quote is the price you pay. If we find something unexpected during the job, we stop and call you before spending another dime. You approve the change, in writing, before any additional work happens. Free estimates on Gate Installation - Highland Village. $40 off any repair over $200. No trip charge inside Denton County.
We Also Serve Cities Near Highland Village
Our crews work Highland Village every day, but we also serve the surrounding towns. If you’re in Flower Mound, Lewisville, Lake Dallas, or Corinth, the same owner-operated team covers your neighborhood. Same live-answer phone, same Gate Motor & Opener in Highland Village standards applied anywhere we work.
Serving Highland Village, TX - Our Local Coverage Area
We’re based in the Highland Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Highland Village
Because the clay under your gate post is shrinking during the summer drought, and the post has tilted just enough to bind the operator’s travel without being visible to the eye. In late summer, Denton County clay contracts hard, and a post that’s been gradually moving all summer finally binds the gate leaf against the opener’s limit. We check post plumb with a laser level and re-set the footing if it’s moved more than a half-inch. Call (877) 610-2993 if your gate faults in August and September. We’ll diagnose it before you lose a gearbox.
No. A solar opener on a 400-plus pound ornamental iron gate in Highland Village will underperform and kill its battery within two years, especially on the lake side where overcast winter weeks are common. Solar operators work for light tube gates on rural acreage. Your heavy iron gate needs a hardwired AC operator with a battery backup. We install the correct system the first time and explain why the lighter-duty option would have failed.
Fix the hinge post first. A gate sags in the hinge post, not in the middle. In Highland Village, the post has usually tilted out of plumb due to clay movement, or the hinge bracket has rusted through from lake humidity. Replacing the panel without correcting the post means the new gate sags too, and you’ll fix it twice. We dig and re-set the post, replace rusted brackets with stainless or hot-dip galvanized steel, then re-hang the gate so the operator travels smoothly. That’s the repair-first approach Hal has used since 2001.
Yes, in most cases. LiftMaster operators from the mid-2000s onward can be integrated with new intercom and camera entry systems through a simple relay connection, provided the control board has an open input. Highland Village homeowners often upgrade the entry system while keeping a perfectly good operator. We handle the wiring, relay setup, and programming, and we’ll tell you honestly if your specific board lacks the input and needs a small add-on module rather than a whole new operator. Call (877) 610-2993 for a free compatibility check.
Your gate must have working entrapment protection: either monitored photo eyes, contact edges, or a reversing mechanism that stops and reverses when the gate hits an obstruction. Highland Village homes built in the 1990s often have original edge sensors that have failed silently. We check the full entrapment-protection circuit on every motor repair, and if your sensors are dead, we replace them before they become a liability. A gate that doesn’t reverse on contact is dangerous, especially with kids and pets around. Call (877) 610-2993 and we’ll inspect yours.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Highland Village
If your gate motor is groaning, faulting, or just quit, call (877) 610-2993. You’ll get a live person, not a menu. We’ll schedule a time that works, show up when we said, and fix the actual problem. Hal’s name goes on the invoice, and the 90-Day Done Right Promise goes with it. Written by Hal Gatewood, Owner at Gatewood Fence & Gate.