Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Gallatin
Gate parts and welding work in Gallatin runs about $180 to $2,800 depending on whether we’re replacing a hinge on a subdivision swing gate or fabricating a custom steel frame for a lakefront estate on Old Hickory Lake. Most hinge replacements and rail repairs are done in one visit, and we keep common parts for DoorKing, LiftMaster, and Viking operators on the truck so we’re not running back and forth to a supply house while your gate hangs open. If you’re in 37066 and your gate is sagging, binding, or refusing to close, call (877) 610-2993 and Hal or one of his crew will give you a straight answer and a written price before any work starts.
Why Gatewood Fence & Gate Is Gallatin’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and his name is still on the shop and on every invoice. That’s not a marketing line. It’s how a business works when the owner lives with the consequences of every job. We’ve welded gates back square in Fairvue Plantation, replaced hinge posts off Long Hollow Pike, and added operators to manual gates in older neighborhoods near the Gallatin square. The work holds up because we fix the post and the hinge first, not the symptom.
We answer the phone with a live person around the clock. Not a voicemail, not a queue. You call, a person answers, and you hear a real voice telling you when we’ll be there. Our reputation around Gallatin is built on the 90-Day Done Right Promise, stamped in writing on every job. If something isn’t right, one call brings Hal back. No runaround, no fine print, no “that’s normal wear.” It is not normal, and we make it right.
Every job comes with a free estimate, no trip charge inside Sumner County, and $40 off any repair over $200. Seniors and veterans get 10% off permanently, no haggling required. Those aren’t promotions we run when business is slow. They’re standing offers, the same way Hal has run things since he started.
Our Gate Parts & Welding Services in Gallatin
We handle the full Gate Parts & Welding scope, but in Gallatin three jobs come up more than any other: hinge replacement, post replacement, and custom welding. Here’s how each one actually works when we’re in your driveway.
Hinge Replacement
A gate sags in the hinge post, not in the middle. That’s where we start. In Gallatin’s humid summers, steel barrel hinges on ornamental aluminum gates rust from the inside out, and by the time the gate is dragging the ground, the hinge pin is usually seized and the post is pulled out of plumb. We cut the old hinge off, weld a new one in place, and shim the post back to level before the operator ever gets touched. On most subdivision gates along Highway 31E, hinge replacement runs $180 to $450 per hinge, including the part and the welding.
Post Replacement
When a post cracks at the footing, a new hinge isn’t enough. That’s the case in a lot of Gallatin’s newer subdivisions, where builder-grade footings were poured shallow and the 2022 ice storm finished the job. We dig out the old footing, set a new steel post in deeper concrete, and weld the gate hardware back to it. Depending on the size of the post and whether it carries an operator, post replacement in Gallatin runs $400 to $1,200. If the post is holding a rack and pinion slide gate, the job includes realigning the track so the gate doesn’t bind and burn out the motor.
Rail Repair
Slide gates along Old Hickory Lake and in newer estates take a beating from thermal expansion and ice. Rails get bent, welds crack, and the gate starts jumping the track. We straighten or replace the rail, weld the frame back square, and adjust the rollers so the gate moves cleanly. Rail repair around Gallatin typically runs $250 to $700. If a spring thunderstorm surge has already fried the control board, we’ll catch that while we’re under the gate and tell you before we touch it, not after.
Custom Welding
Half the welding we do in Gallatin is work that should have been done at the factory. Oversized ornamental gates on lakefront estates need gussets, reinforced stiles, and heavier hinges than the original design called for. We weld on site, in your driveway, so the gate never leaves your property. Custom welding jobs start around $300 and go up based on material and time. A full gate frame reinforcement usually lands between $900 and $2,800. We’ll give you the number before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gallatin
We’re certified to service Viking, Ghost Controls, DoorKing, and Elite operators, along with LiftMaster, FAAC, BFT, Linear, and Mighty Mule. For our Gallatin customers, we keep a rolling stock of boards, hinges, rollers, and keypads on the truck so a morning call can often be a same-day fix. If your subdivision gate runs a DoorKing board that got smoked by a thunderstorm or a Viking opener that’s been struggling since the last ice event, we know the failure points on those units and we stock the parts that actually fail, not the parts that are easy to keep.
Common Gate Parts & Welding Problems We See in Gallatin Homes
- Builder-grade operators failing early along Highway 31E and Long Hollow Pike. These were the cheapest unit the developer could spec, and they were never matched to the weight of the gate. We see stripped rack and pinions and burned boards inside five years.
- Missing conduit runs leaving control boards unprotected. When the gate was installed, the builder skipped the surge protection and the proper raceway for the low-voltage wiring. Gallatin’s spring thunderstorms hit those boards hard. We run the conduit, add the protection, and the board stops frying.
- Corroded hinges and track hardware on Old Hickory Lake estates. The humidity off the lake accelerates rust on steel parts. Swing gates sag, bind against the grade, and the operator motor burns out trying to move a gate that’s fighting the ground.
- Warped wooden frames on older in-town parcels near the historic square. Ice storms coat the gate, add hundreds of pounds, and pull hinge posts out of their shallow footings. By spring, the gate won’t latch and the post is leaning. We replace the post and weld a steel frame insert to stop the warp from coming back.
Pricing for Gate Parts & Welding in Gallatin, TN
Here’s what we see in the Gallatin market, line by line:
- Hinge replacement: $180-$450 per hinge
- Post replacement: $400-$1,200 depending on footing depth and operator load
- Rail repair: $250-$700
- Custom welding: $300-$2,800 depending on scope and material
- Operator board replacement: $250-$900 including the board, surge protection, and labor
- Full automation add-on for a manual gate: $1,500-$4,500 with power run, operator, safety edges, and keypad
The price we quote is the price on the invoice. We don’t add a “parts surcharge” or a “fuel fee” after the fact. Before any work starts, you have the number in writing. Estimates are free, and if another company already gave you a written estimate, we’ll give you a free second opinion on it. Call (877) 610-2993.
We Also Serve Cities Near Gallatin
Most of our Gallatin work comes from Highway 31E and Long Hollow Pike, but we’re out in Hendersonville, Green Hill, White House, and Mount Juliet every week. If you’re anywhere in Sumner County or the northern edge of Davidson County, we’ll get to you. This page is about Gallatin, but the same crew and the same 90-Day Done Right Promise cover the whole area.
Serving Gallatin, TN - Our Local Coverage Area
We’re based in the Gallatin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Gallatin
They fail because the developer installs the cheapest operator that will lift the gate on day one, without accounting for the weight of ornamental aluminum, wind load, or the way Gallatin’s humid summers and ice storms slowly change the gate’s geometry. The motor works harder every month until a board fries or a rack strips. We see it most along Highway 31E and Long Hollow Pike. If your operator has been getting slower or noisier, call us at (877) 610-2993 before it dies completely. The fix usually costs less than the emergency call.
Yes, we do it regularly. The catch in Gallatin is usually the power run. Builders don’t stub out conduit for a future operator, so we have to trench and run the electrical ourselves. We handle the power, the operator, the safety edges, and the keypad as one job, priced up front. Expect $1,500 to $4,500 for a full automation add-on. We’ll survey the gate and give you a written number before anything is ordered.
Reinforcing the hinge-side frame on oversized ornamental steel gates. The weight of those gates, combined with lake humidity that rusts the original welds, causes the frame to crack at the hinge points. We cut out the cracked section, weld in a heavier plate and gusset, and reinforce the hinge post. Most of those jobs fall between $700 and $2,200. Call (877) 610-2993 for a free on-site estimate.
Ice builds up in the track and on the rollers, and when the opener forces the gate to move, the force bends the rail or knocks the rollers out of alignment. Once the gate jumps once, it usually keeps jumping until the rail is straightened and the rollers are reset. We fix it in one trip, usually $250 to $600 depending on rail damage. If your gate jumped this winter, don’t keep running it. The next failure is usually the operator motor.
Usually just the hinge post. We cut the gate off the old post, set a new steel post in deeper concrete, and weld the gate back on. The gate frame only gets welded if it’s cracked or twisted. If it’s just the post that failed, the gate frame stays as it is. Post replacement in Gallatin runs $400 to $1,200. We’ll tell you which one you need after we see it. Call (877) 610-2993 and we’ll come look.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gallatin since 2001.