Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Motor & Opener Across Gallatin
Gate motor and opener repair in Gallatin runs $185-$480 for most jobs, with full motor replacements typically landing between $650 and $1,400 depending on the brand and gate type. We’re at your gate in Gallatin the same day you call, usually within a few hours, and we quote the price before a single tool comes off the truck. Hal Gatewood has been fixing gates since 2001, and his name is on every invoice. Call (877) 610-2993 and a real person answers, day or night.
Why Gatewood Fence & Gate Is Gallatin’s Preferred Gate Motor & Opener Company
We’re not a national outfit that has never driven down Long Hollow Pike. Hal lives this work. He built Gatewood Fence & Gate in 2001 and still shows up to jobs himself, which means the person quoting your gate motor repair in Gallatin is the same person standing behind the 90-Day Done Right Promise if something isn’t right. That promise is written on every invoice, not buried in fine print.
Gallatin homeowners call us because we actually answer. A live person picks up 24 hours a day, seven days a week. Not a voicemail, not a call center, not a bot. When a swing gate motor burns out trying to break ice after a Sumner County ice storm, you don’t want to leave a message. You want someone who knows Gallatin’s subdivisions and will tell you straight what it takes to fix it.
Scheduling is coordinated through our office, and crews serve Gallatin locally. That means no waiting on a truck from three counties over. When you call about a dead opener in a gated community off Highway 31E, the person who shows up has seen that exact control board failure a dozen times before. Hal and his crew are certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so there’s rarely a brand we can’t fix the same visit. We also offer a free second opinion on any written estimate and never charge a trip fee inside the county.
Hal’s philosophy on gate work is simple: fix the gate in your driveway. He welds on site, repairs what’s repairable, and doesn’t try to sell you a full replacement when a $40 control board fix gets you running again. Gallatin homeowners between 50 and 70 who have been burned by price-swapping national companies appreciate a name they can verify. The shop address is published. The license number is real. The name is on the door.
Our Gate Motor & Opener Services in Gallatin
Motor Installation
New motor installation in Gallatin runs $450-$1,400, and the range depends mostly on gate type and brand. A new Viking slide motor for a gated community entrance off Long Hollow Pike costs more than a basic Ghost Controls swing opener for a single-family driveway off Highway 31E. Before we touch anything, we check the gate’s travel, hinges, posts, and alignment. A motor installed on a sagging gate will burn out in a year. We measure, quote, and install without pulling a gate off its hinges unless it actually needs it. Every installation carries the 90-Day Done Right Promise in writing.

Motor Repair
Most motor repairs in Gallatin cost $185-$480. The most common call we get in newer subdivisions is a control board fried by a spring thunderstorm surge. Gallatin’s dense cluster of 2000s and 2010s gated communities means hundreds of automated systems within a few square miles, and Middle Tennessee lightning does not discriminate. Hal carries replacement boards and keypads for the major brands, so many repairs are done the same visit. If the motor is truly gone, we’ll tell you honestly and give you a written quote for replacement before any work is done.

Linear Motor
Linear motors drive most slide gates in Gallatin’s newer HOA subdivisions. These are the arms that run along the rack on a slide gate, and when a rack is misaligned, the motor strains every cycle until it stops. We commonly see this in communities along Long Hollow Pike where ground settling shifts the rack a few millimeters over a year. Fixing the rack alignment and motor before it fails costs less than emergency replacement after it burns out. Linear motor service in Gallatin generally runs $250-$700.

Slide Motor
Slide gates are the workhorse of Gallatin’s gated communities and lakefront estates on Old Hickory Lake. These motors sit low, and gallatin’s humid summers put rust on tracks and mounting hardware faster than homeowners expect. Middle Tennessee ice storms coat that same track in ice, and a motor forced to break through it can burn out in a single cycle. We install slide motors with proper clearance and lubrication schedules, and we show you what winter maintenance prevents a $900 replacement. A typical slide motor replacement in Gallatin runs $550-$1,200.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Gallatin
Hal and his crew are certified on the big three Gallatin sees most: Viking, DoorKing, and Elite. Those brands dominate the HOA gates and lakefront estates around town, and we stock common parts so Gallatin customers aren’t waiting a week for a backordered board. Ghost Controls shows up on newer single-family driveway gates in subdivisions along Highway 31E, and we service those too. When a Viking board gets surged, or a DoorKing keypad stops talking to the intercom, we’re already carrying what it takes to make it right, usually that day. Need a motor or opener you don’t see listed? Call (877) 610-2993 and ask. If Hal doesn’t fix it, he’ll tell you straight.
Common Gate Motor & Opener Problems We See in Gallatin Homes
- Fried control boards after spring thunderstorms. Gallatin’s quick growth means dense clusters of automated gates, and Middle Tennessee spring storms hit Sumner County hard. A single surge can take out a board and keypad. We carry replacements and can usually restore access the same day.
- Burned-out motors after winter ice. Ice storms in Gallatin hit stronger than in Nashville proper because of the elevation changes across the county. Slide gates freeze to their tracks, and the motor tries to move anyway. We see this every winter, and the fix starts with proper track maintenance before the storm, not after the motor smokes.
- HOA architectural approval delays. In gated Gallatin subdivisions, the HOA often has to approve enclosure color, motor size, or keypad type before work begins. We coordinate with management companies so the repair doesn’t sit frozen mid-cycle while paperwork crawls.
- Rust on hinges and track hardware. Gallatin’s muggy summers accelerate rust on steel hinges and slide tracks. Older in-town parcels near the historic square tend to have simpler gates with manual hardware that corrodes quickly in humidity. We repair or weld on site rather than replacing whole gates.
Pricing for Gate Motor & Opener in Gallatin, TN
Real numbers, not a sales line. Gate motor repair in Gallatin runs $185-$480 for most issues, including board replacement, keypad work, limit switch adjustments, and wiring repairs. Full motor installation runs $450-$1,400, with slide motors for HOA and lakefront gates at the higher end. Linear motor service lands around $250-$700. Battery backup installation adds $250-$550 depending on the system. Every quote is written and agreed before work starts. You will not see a bigger number at the door. Seniors and veterans get 10% off permanently. And any repair over $200 takes $40 off. Estimates are free. Call (877) 610-2993 and Hal will tell you what it costs.
We Also Serve Cities Near Gallatin
Our Gate Motor & Opener service covers Gallatin and the surrounding communities. We also serve Hendersonville, Green Hill, White House, and Mount Juliet. If you’re a few minutes outside Gallatin proper, Gallatin is our home base for the county, and we’ll bring the same same-day service out to you.
Serving Gallatin, TN - Our Local Coverage Area
We’re based in the Gallatin area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Gallatin
Yes, in most gated Gallatin subdivisions the HOA wants a say in motor brand, enclosure color, and sometimes keypad placement. That’s normal. We work with management companies daily and can often handle the approval on your behalf. Last spring our crew replaced a fried Viking control board and keypad at a gated subdivision off Long Hollow Pike after a thunderstorm surge. The HOA had already coordinated architectural approval for the enclosure color, and our techs worked with the management company to restore resident access before the morning commute. We know the process. We won’t leave your gate frozen mid-cycle waiting on paperwork we could have filed for you. Call (877) 610-2993 and we’ll walk through your specific community’s rules.
Yes. Battery backup ties into the motor’s power supply and keeps the gate operational when mains power drops. It does not change how the keypad or intercom works. In a Long Hollow Pike community, the HOA usually just wants the enclosure to match the existing setup, and we handle that approval. A power outage in Gallatin during a thunderstorm shouldn’t leave residents locked out or locked in. Battery backup is cheap insurance against exactly that. Install runs $250-$550 depending on the system. Call (877) 610-2993 for an exact quote. Estimates are free.
The fix starts with a new motor, but the real answer is preventing the next one. Gallatin ice storms hit harder than Nashville because of the county’s elevation variation, and swing gates freeze at the hinge and latch points before they freeze at the motor. When the motor tries to force the frozen gate open, it’s done. We replace the motor, then we adjust the hinges, clear the travel path, and show you what to do before the next storm so you don’t burn out another $600 motor. Repair and replacement together typically run $450-$950. Call (877) 610-2993 and we’ll get out today.
Intercom integration on lakefront estates is usually simpler than people think because the estate’s gate is private while the HOA’s interest is at the community entrance. We wire the intercom to release the estate gate when you answer from your phone or handset, and we coordinate with the HOA so their access system still works at the shared entrance. Gallatin’s lakefront properties on Old Hickory Lake tend to run DoorKing or Viking systems with intercom boards that sometimes lose sync after power surges. Hal tests the full path before he leaves, not just the part he replaced. Call (877) 610-2993 for a visit. No trip charge inside the county.
Yes, and it’s not close. Gallatin’s rapid expansion has put hundreds of brand-new automated gate systems in a tight area along Highway 31E and Long Hollow Pike. Spring thunderstorm surges don’t care how new the board is. A single lightning strike near a cluster of homes can take out multiple boards and keypads. Older neighborhoods in Sumner County with manual gates don’t have this problem because there’s nothing electronic to fry. We carry replacement boards for Viking, DoorKing, Elite, and Ghost Controls, so we can often have a community’s gate working again the same day the surge hits. Call (877) 610-2993 if your board is dead. We answer around the clock.
Call Gatewood Fence & Gate in Gallatin
Hal has been fixing gates since 2001, and he’ll talk to you like a neighbor because he is one. The 90-Day Done Right Promise means one call brings him back if something isn’t right. No runaround, no fine print. The quote is written and agreed before work begins. If you’re in Gallatin, 37066, or anywhere in the county, call (877) 610-2993 for a free estimate on any gate motor or opener job. Free second opinion on any written estimate, too. You’ll talk to a real person. Hal’s name is on the shop, and the shop’s down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Gallatin since 2001.





Before
After
Before
After
Before
After