Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Fraser
If your Fraser gate is dragging the sidewalk, sagging off its hinges, or refusing to latch after the spring thaw, you’re not alone. Nearly every subdivision in Fraser was built between the late 1950s and mid-1970s, which means the original chain-link and ornamental iron gates across this city are now 40 to 60 years old and failing together. Gatewood Fence & Gate has been fixing those exact gates since 2001, with on-site welding so the gate stays in your driveway rather than getting hauled off to some shop. Call (877) 610-2993 and you’ll get a live person who can tell you when we’ll be there.
Why Gatewood Fence & Gate Is Fraser’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, the shop is down the road, and he has been at this since 2001. That matters in Fraser, where most of the gate work we do is on the same 1960s-era ranch and tri-level homes that line streets like Klein, Garfield, and Utica Road. We know what those original installations look like, how they were welded, and exactly where they fail first. When a Fraser customer calls about a gate that won’t close, we already know the likely culprit before we pull up: frost-heaved corner post, racked frame, latch that’s drifted out of line. The 90-Day Done Right Promise covers every job in writing, and a live person answers the phone 24/7, not a voicemail.
Fraser homeowners tell us the same thing over and over: they called a national outfit, got a quote over the phone, and watched the price change at the door. That doesn’t happen with us. The price you’re quoted is the price you pay, and it’s agreed before we touch a single bolt. We’re insured and bonded, our crew is background-checked and uniformed, and we service nine major gate brands including FAAC, BFT, Linear, and Viking. If you want a second opinion on any written estimate from another company, it’s free. If you’re a senior or veteran, you get 10% off, permanently. If the repair is over $200, you save $40. No haggling, no fine print.
Our Gate Parts & Welding Services in Fraser
Hinge Replacement
Fraser’s clay soil doesn’t just move posts, it loads the hinges on every swing gate in the city until something gives. A hinge replacement in Fraser typically runs $145 to $285, depending on gate weight and whether the post needs shimming to bring the panel back to plumb. We replace hinges on chain-link, ornamental iron, and tube-steel gates, and we weld the new hinge plates on rather than bolting through rust-thinned metal that’ll crack again. On corner lots near 13 Mile and 14 Mile, where frost heave hits hardest, we’ll often find the original hinge screws stripped and the plate cocked sideways. Fixing that right means welding, not just swapping hardware.
Post Replacement
When the hinge post moves, the gate follows. On Fraser’s ranch and tri-level lots, the original posts were set in shallow concrete footings that predate any real understanding of Macomb County’s frost cycle. Post replacement in Fraser runs $325 to $675, which includes cutting out the old footing, setting a new post in a deeper concrete base, and re-hanging the gate so it clears cleanly. The spring thaw is when we see this most: a post that was perfectly plumb in October sits an inch and a half out by March, and the gate drags. We dig, we set, we weld, and we don’t leave until the panel swings true.
Rail Repair
Rail repair on a Fraser gate usually means the horizontal members have cracked near a welded joint, or the rail itself has bowed from years of freeze-thaw stress working against a fixed post. Typical rail repair costs in Fraser run $180 to $395, depending on whether we’re straightening and re-welding or fabricating a replacement section. On the ornamental iron gates common to 1960s Fraser construction, the top rail is almost always where the rust starts, right where water pools on a flat surface. We cut out the bad section, weld in solid stock, and grind it smooth so the paint looks like it was never touched.
Custom Welding
Custom welding in Fraser covers everything from re-setting a broken scroll to fabricating a whole new gate frame when the old one has racked beyond reasonable repair. Prices for custom welding work run $120 to $450 depending on scope, and we do it on site, in your driveway, with a mobile welding setup that handles steel, iron, and aluminum. Half of what we weld in Fraser is repair work on original 1960s iron that somebody else said was beyond saving. Hal would rather weld it square and send you on your way than sell you a replacement you don’t need.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fraser
We’re certified to service nine major gate operator and hardware brands, and we keep parts in local stock for Fraser customers including FAAC, BFT, Linear, and Viking. That means when your opener board fails or your actuator strips a gear, we’re not waiting a week for a part to ship from a warehouse. We carry the common stuff on the truck. If you’ve got a solar gate opener on a long Fraser driveway that’s gone dark, we’ll test the panel, the battery, and the connection path before we quote you anything, so you know exactly what failed and why.
Common Gate Parts & Welding Problems We See in Fraser Homes
- Spring post-shift on corner lots. Frost heave in Macomb County’s dense clay pushes corner hinge posts out of plumb every winter. By April, swing gates across Fraser are dragging the ground or missing the latch by half an inch. The fix is a deeper post footing and a re-welded hinge plate, not just cranking the hinges.
- Racked frames on original 1960s gates. The ornamental iron and chain-link gates installed when Fraser’s subdivisions were built are now 40 to 60 years old. Decades of freeze-thaw cycling have stressed the welded joints until the frame itself has gone parallelogram. We cut, square, and re-weld on site.
- Latch and lock drift. When the post moves even a quarter inch, the latch bar no longer lines up with the strike plate. Fraser homeowners call us every spring because the gate won’t stay closed. Re-shimming the hinges or re-setting the post fixes the latch without replacing the whole gate.
- Solar opener failure on long driveways. A solar gate opener that’s dead in April but worked in October usually has a sulfated lead-acid battery or corroded panel connections from repeated condensation cycles. We diagnose it first, then quote the repair, and we don’t sell you a new opener because a battery died.
Pricing for Gate Parts & Welding in Fraser, MI
Here’s what you can expect to pay for gate parts and welding in Fraser. Hinge replacement: $145 to $285. Post replacement: $325 to $675. Rail repair: $180 to $395. Custom welding: $120 to $450. The spread depends on gate size, material, and how much damage the clay soil has already done. Every repair over $200 carries $40 off. There’s no trip charge anywhere in Macomb County, and we give you a free second opinion on any written estimate from another company. The price we quote is the price you pay, agreed before work begins.
| Service | Typical Fraser Price Range | Notes |
|---|---|---|
| Hinge Replacement | $145 - $285 | Includes post shimming if needed |
| Post Replacement | $325 - $675 | Deeper concrete footing, re-hang included |
| Rail Repair | $180 - $395 | Straighten and re-weld, or fabricate section |
| Custom Welding | $120 - $450 | On-site, steel/iron/aluminum |
We Also Serve Cities Near Fraser
Our Gate Parts & Welding team covers Fraser and the surrounding Macomb County communities, including Roseville, Clinton Township, Saint Clair Shores, and Sterling Heights. If you’re just outside Fraser, call anyway: same crew, same pricing, same 90-Day Done Right Promise.
What Fraser Homeowners Should Know About Gate Repair
Fraser’s subdivision grid is a time capsule of 1960s construction. The ranch and tri-level homes on streets like Klein Drive and Garfield Road were built when chain-link and simple ornamental iron were the standard, and those gates have now outlived their design life three times over. What makes Fraser different from Roseville or Clinton Township is how uniformly the housing stock ages. Block after block, the same original hinge posts, the same original latch hardware, the same weld joints all hit the end of their useful life in the same decade. The dense Macomb clay underneath compounds it: every freeze-thaw cycle heaves posts a little further out of plumb, and the gates follow. That’s why post replacement and custom welding are the two highest-demand gate services in Fraser, and why we stock the repair parts for this city’s specific gate stock rather than making you wait on a generic order.
On a corner lot near Klein and 14 Mile, our crew reset a frost-heaved hinge post on a 1960s ornamental iron swing gate that was dragging the sidewalk and refusing to latch. We cut the old post footing, set a new post in a deeper concrete base, and welded the gate frame square before re-hanging the panel so it clears cleanly through the thaw cycle. That’s the standard repair on Fraser corner lots, and we’ve done it enough times to know exactly what we’ll find when we dig.
Serving Fraser, MI - Our Local Coverage Area
We’re based in the Fraser area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Fraser
The clay soil under Fraser expands and contracts with every freeze-thaw cycle, pushing your hinge post up and out of plumb during winter. By April the post has moved enough that the gate panel sags and drags. In summer the clay dries and the gate settles back, which is why it only works “fine” when the ground is warm. The permanent fix is a deeper concrete footing for the post and a re-welded hinge plate. Call (877) 610-2993 and we’ll dig it out and do it right, with a free estimate before any work starts.
Yes, and we do it on site. Most of the ornamental iron gates on Fraser’s 1960s ranch homes can be welded back to full strength without replacing the gate. We cut out the rusted or cracked section, weld in solid stock, grind it smooth, and the gate swings like it did forty years ago. A typical rail repair in Fraser runs $180 to $395. Call us for an exact quote, no trip charge inside Macomb County.
Usually the battery, but sometimes the panel, and condensation is the culprit either way. Older lead-acid batteries sulfate after a few Michigan winters, and panel connections corrode from repeated freeze-thaw condensation. We test the panel output, the battery voltage, and the wiring before quoting anything, so you pay for what actually failed, not a guess. Solar opener diagnostics and repair in Fraser start around $145.
You fix the post first, then the gate. If the post is heaved out of plumb, no amount of hinge adjustment will keep the gate from dragging, because the base the hinges mount to is moving. We cut out the old footing, set a new post in a deeper concrete base that reaches below the frost line, then re-hang the gate and weld the hinge plates square. Post replacement in Fraser runs $325 to $675 including the re-hang. Call (877) 610-2993 for a free estimate.
If your gate has an electric opener and we’ve been welding on the frame or hinges, the safety edges and photo-eyes need to be re-checked and re-aligned. Welding current can stress control boards if the opener wasn’t disconnected, so we always isolate the electronics before striking an arc. If you’re adding or updating an opener on a Fraser gate, a loop detector or photo-eyes may be required depending on how the gate swings and where it sits relative to the sidewalk. We’ll tell you what’s needed and quote it before any work starts.
Call Gatewood Fence & Gate for Gate Parts & Welding in Fraser
If your Fraser gate is dragging, sagging, or refusing to latch, call (877) 610-2993. A live person answers, day or night, and we’ll get someone out to look at your gate free of charge inside Macomb County. You get a written price before any work starts, a free second opinion on any other company’s estimate, and the 90-Day Done Right Promise on every job. Hal’s name is on the shop, and he’s been at this since 2001. If it’s not done right, one call brings him back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fraser since 2001.