Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Fraser
Gate access control in Fraser, MI gives homeowners a way to open the driveway gate from the house, the car, or a phone, without ever stepping outside. Whether it’s a keypad, remote, card reader, or a phone entry system that rings your cell when a delivery driver pulls up, the job here usually starts with a 1960s gate post that’s heaved out of plumb. We know that because we’ve been fixing and upgrading gates in Fraser since long before smart access was a buzzword. If your gate drags, binds, or won’t latch cleanly, the access control won’t work right either. Call (877) 610-2993 and we’ll sort both problems while we’re there.
Key Takeaways
- Fraser’s original 1960s gate posts are failing simultaneously, so access control retrofits almost always need sag correction or post footing work first.
- Macomb County clay frost heave is the single biggest reason Fraser gate keypads work in summer and fail every March.
- We’re a repair-first, welded-on-site company with a written 90-Day Done Right Promise.
- Free estimates and no trip charge inside the county. You’ll know the price before any work starts.
Why Gatewood Fence & Gate Is Fraser’s Preferred Gate Access Control Company
Hal Gatewood has been at this since 2001, and the shop’s address is published for anyone who wants to stop by and look him in the eye. That matters in a city like Fraser, where a lot of homeowners have already been burned by a national outfit that quoted one number on the phone and billed another at the front door. Our quote is the quote. It’s written down, agreed to before we start, and it does not change at the door.
We answer the phone with a live person, 24 hours a day. Not a voicemail, not a call center three states over. When a Fraser homeowner calls about a gate that won’t open, the person who picks up actually understands what a frost-heaved hinge post in Macomb County clay does to a LiftMaster operator. Hal’s name is on every invoice, and the 90-Day Done Right Promise is stamped in writing on every job. If it’s not done right, one call brings him back. No runaround, no fine print.
Our Gate Access Control Services in Fraser
Our Gate Access Control team handles the full range of access systems for Fraser driveways and side yards, from simple remote controls to phone entry and card readers. Every install starts the same way: we check the gate frame, the post footings, and the latch before we touch the electronics. If the gate sags, the motor won’t fix it. We fix the gate first, then mount the access control. Here’s what we handle most often in Fraser:
Keypad Entry
Keypad entry is the most common access control upgrade on Fraser’s 1960s-era driveway gates. You get a code for family, a separate code for a neighbor or lawn crew, and you can delete any code in ten seconds. On a corner lot in Fraser, where clay heave hits exposed hinge posts hardest, we always check the post before mounting the keypad. A keypad on a sagging gate is a keypad that won’t open the gate by April.
Remote Control
Remote control for a Fraser gate means the same thing it means on a garage door: press the button, gate opens, you drive through. We program remotes for LiftMaster, DoorKing, Viking, and most other major brands, and we can tie the remote into an existing keypad or phone entry system. On Fraser’s smaller 1960s lots, a remote-only setup is often the simplest answer, but we’ll tell you plainly if a phone entry module gives you more for the same money.
Phone Entry
Phone entry is the upgrade Fraser homeowners ask for most once delivery drivers become a daily fixture. You mount a module that calls your cell phone when someone presses the button at the gate, and you buzz them in from anywhere. This matters on Fraser’s ranch and tri-level lots, where the front door can be forty yards from the driveway gate. No more walking out in February to see who’s at the curb.
Card Reader
Card readers show up on Fraser properties where the gate gets used by more than just family: a shared driveway between two neighbors, a home business, or a rental on the lot. We program key cards or fobs and can add them to an existing keypad system. Shared driveways on older Fraser lots often mean narrower openings, so we’ll measure the gate and tell you straight whether a card reader retrofit makes sense on your specific setup.
Video Intercom & Smart Access
Video intercom adds a camera to the call, so you see who’s at the gate before you open it. Smart access ties the system to an app on your phone, with activity logs and remote open commands. For Fraser homes with restricted side-yard space, we often pair smart access with a solar gate opener, because there’s no practical way to trench 120-volt power between a 1960s ranch and the lot line. We’ll tell you if that’s your situation, and we’ll sell you the right setup instead of the most expensive one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fraser
We service and install Linear and Viking access control equipment regularly in Fraser, and we keep common parts on the truck for those brands and for LiftMaster operators, which you’ll see on a lot of the city’s older automatic gates. DoorKing systems come through our shop less often in Fraser, but our techs are certified on them and can repair or replace DoorKing hardware when a homeowner already has it. Because we stock local parts and weld on site, a Fraser repair usually finishes the same day we arrive, not two weeks later after a part ships from somewhere in Texas.
Common Gate Access Control Problems We See in Fraser Homes
- Keypad works all summer, fails every March. Clay frost heave shifts the hinge post over the winter, the gate frame racks, and the latch binds so the motor can’t pull the gate off the strike. The keypad isn’t broken. The post is out of plumb. We fix the post first.
- Shared driveway gate too narrow for a standard swing operator. Fraser lots from the 1960s often have driveway gates under 12 feet wide, and a lot of swing gate operator specs assume you’ve got room. We look for a slide gate conversion or a custom rack and pinion retrofit that fits the opening you actually have.
- No power at the gate and no room to trench. When the side yard between your house and the fence is only 3 feet wide, running conduit means digging under a patio or through roots. A solar gate opener is often the only workable option for remote control on those Fraser lots, and we’ll be straight about what it can and can’t power.
- Old ornamental iron gate won’t hold a modern operator. The 1960s gates in Fraser were built before anyone imagined smart access. Some can be retrofitted. Some need reinforcing or a new top track. We weld on site, so the gate stays in your driveway while we work.
Pricing for Gate Access Control in Fraser, MI
A keypad entry install on an existing Fraser gate typically runs $280-$650, depending on whether we’re adding a standalone keypad or integrating it with a new operator. A phone entry module usually adds $350-$600 to that. Full access control packages with an operator, keypad, and remote control on a standard single-swing Fraser driveway gate generally land between $1,500 and $2,800. If the gate needs sag correction, post footing work, or a slide conversion before the access control goes on, that’s quoted separately, in writing, before we start. Every quote is agreed to before any work begins, and that price doesn’t move. Call (877) 610-2993 for a free estimate, and remember: $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate from another company.
We Also Serve Cities Near Fraser
If you’re down the road in Roseville, Clinton Township, Saint Clair Shores, or Sterling Heights, we cover those areas too. But this page is for Gate Access Control in Fraser, and we wrote it specifically for the gates, the soil, and the 1960s house lots that make this city its own thing.
Serving Fraser, MI - Our Local Coverage Area
We’re based in the Fraser area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Fraser
Because the clay under your hinge post heaves when it freezes, and the post moves out of plumb, racking the gate frame so the latch binds and the motor can’t pull it free. This is the most common access control failure in Fraser, and it repeats on a predictable cycle every spring. We correct the post footing, fix the sag, and the keypad works again. On a corner lot, the problem is almost always worse, because the exposed post takes more frost. Call (877) 610-2993 and we’ll check it while the ground is still soft.
Usually, yes. The access control itself mounts to the post or the operator, and we can fit phone entry modules to chain-link gates that are still structurally sound. The question is whether the original 1960s post footing is still holding plumb. In a Fraser subdivision near Garfield Road, one of our techs arrived for a keypad entry install on an original ornamental iron gate and found the hinge post heaved 2 inches out of plumb. We repaired the footing, corrected the sag, and mounted the operator with a phone entry module so the owner could buzz in delivery drivers without leaving the house. That gate has latched clean every thaw since. Yours probably needs the same first step.
Yes, in many cases a slide gate actually works better than a swing gate on a narrow Fraser side yard, because it doesn’t need room to arc open. The main constraint is having enough fence line for the gate to slide along, and we measure that before recommending anything. If the lot sits tight against the property line and there’s no practical trench for power, a solar opener paired with the access control is often the workable answer. We’ll measure it and tell you straight what fits.
It can be, but not always. Fraser’s older subdivisions have big mature trees that didn’t exist when the houses went up, and a solar panel in full shade won’t keep a battery charged through a Michigan winter. We size the panel to the gate’s use, look at the actual sun exposure on your lot, and sometimes mount the panel remotely on a sun-facing fence line with a wire run back to the operator. We won’t sell you a solar kit that’ll leave the gate dead by February. Call (877) 610-2993 and we’ll check your shade honestly.
Most gate operator and access control retrofits on existing Fraser gates don’t require a city permit, but if we’re setting new posts, pouring footings, or converting to a slide gate, the work can touch the city’s setback and right-of-way rules. We’ll check the specific requirements for your lot before we quote, and we’ll pull any permit that’s actually needed. You won’t find out about a code issue from an inspector months later.
Call (877) 610-2993 for a free estimate on gate access control in Fraser. A live person answers, the quote is in writing before we start, and if it’s not done right, Hal comes back and makes it right. The name’s on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fraser since 2001.