Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Foxborough
Gate hinge replacement in Foxborough typically runs $280-$520 for a standard residential steel or aluminum gate, and post replacement with a new concrete footing lands between $650-$1,400. Most repairs on our side of the county are completed the same day we arrive. We’ve been fixing and welding gates here long enough to know that the Monday after a Patriots home game brings a very specific set of failures to Foxborough driveways, and we keep the parts for those failures on the truck before we even get the call.
If you’re in Foxborough and your gate is sagging, dragging, or hanging by a cracked weld, call (877) 610-2993. Hal Gatewood answers the phone himself, and he’s been at this since 2001.
Foxborough is our backyard, not a dot on a dispatch map. We know Route 1 traffic on event days. We know the older ornamental iron gates in the historic town center. We know which post footings were poured forty years ago and which ones were never set deep enough in the first place. That local knowledge is why homeowners around Patriot Place and the surrounding neighborhoods call us instead of rolling the dice with a company from two counties over.
Why Gatewood Fence & Gate Is Foxborough’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is, and it’s the reason Foxborough homeowners keep our number in their garage. We are not a call center, and the person who quotes the price is typically the same person who shows up with a welder and gets the gate swinging again. When a Foxborough customer calls, a live person answers. Not a voicemail tree. Not a chatbot. Often it’s Hal himself.
We stand behind every weld, every hinge, and every replacement part with the 90-Day Done Right Promise, stamped in writing on every job. If it’s not done right, one call brings us back. No forms, no runaround. That guarantee matters when a custom ornamental gate off Route 1 has to survive another eight weeks of stadium traffic, road salt, and freeze-thaw cycles.
Our crew runs background-checked and uniformed on every job. We don’t outsource the work to whoever’s available that afternoon. The person who welds your gate in Foxborough has done it before, on this kind of gate, in this town. When you ask about a Ghost Controls operator bracket or a Viking hinge retrofit, you get an answer from someone who has actually installed one, not a script reader.
Our Gate Parts & Welding Services in Foxborough
We carry a full range of Gate Parts & Welding work wherever it’s needed in Foxborough, and we do as much as possible on site. Here’s what that looks like:
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Foxborough’s older wrought-iron and ornamental steel gates, especially the ones around the historic town center, develop seized or cracked hinges from decades of New England weather. We cut out the old hinge plates, weld in new ones, and re-hang the gate so it clears the ground and latches square. For heavier automatic gates, we carry LiftMaster and Viking hinge hardware sized to the gate weight, not whatever fits in the bracket.
Post Replacement
A gate post in Foxborough takes abuse from two directions: freeze-thaw cycles heaving the footing, and stadium event traffic clipping the gate itself. When a post is cracked at the base or leaning more than a degree or two, fixing the panel without the post means you’ll fix it twice. We pull the old post, dig and pour a new footing beneath frost depth, set a new steel or wood post, and weld or lag the gate back in place. In the subdivisions off Route 1, this is the most common repair we do after a busy concert weekend.
Rail Repair
Rails crack where the gate flexes, and impact damage from a car bumper bends them out of alignment. We straighten what’s salvageable and weld in new rail sections where it isn’t. On Foxborough’s older wooden gates, we reinforce the top rail before re-hanging so the panel stops twisting under its own weight. It’s quieter work than a full replacement, and it keeps the gate original where the homeowner wants it that way.
Custom Welding
When a standard bracket or hinge won’t do the job, we fabricate on site. That means welding a custom hinge plate for an unusual post, building a steel gate frame around a homeowner’s existing wood panels, or reinforcing an ornamental gate that’s been clipped twice already. We carry a mobile MIG and stick welder on the truck, so the work happens in your driveway in Foxborough, not in some fabrication shop an hour away. You see the weld before it’s painted. You decide if it’s right.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Foxborough
We’re certified to service nine major gate brands, and for Foxborough customers we keep a working stock of the ones we see most: Viking, DoorKing, Elite, Ghost Controls, and the other five. If you have a custom ornamental gate with a specific hinge profile or a heavier automated gate that needs a particular bracket, we’ll tell you up front whether we have it on the truck or need to order it. We also weld adapters and fabricate mounting plates when an off-the-shelf part would leave your gate weaker than it was before.
Common Gate Parts & Welding Problems We See in Foxborough Homes
- Stadium-event impact damage: The morning after a Gillette Stadium sellout, our phones light up. Event-goers making three-point turns in driveways off Route 1 clip swing gate arms, bend hinge posts, and crack welds that had been fine the day before. Stocking extra actuator and hinge parts before the fall NFL schedule is standard practice for us.
- Road salt corrosion: Route 1 gets heavily salted all winter, and that salt spray lands on gate hinges, latch hardware, and automated operator brackets. We see seized pivot points and corroded weld seams on homes within a quarter mile of the highway every spring.
- Freeze-thaw post movement: Foxborough gets 20-30 freeze-thaw cycles a winter. That’s enough to heave a shallow footing out of plumb and crack the concrete around the post. Older ornamental iron gates near the town center suffer first because their footings were poured decades ago, often shallower than modern code.
- Warped wooden gate panels: The ranch and garrison-colonial homes built in Foxborough during the 1970s-90s often have wooden driveway gates. Summer humidity and winter wet snow warp the panels, which then drops them out of alignment and over-stresses the hinges. We weld steel reinforcement into the frame or re-align the hinges to bring the gate back square.
Pricing for Gate Parts & Welding in Foxborough, MA
Here’s what we charge for common repair work across Foxborough’s 02035 ZIP code. These are the prices you’ll hear on the phone, and they’re the prices on the invoice:
- Hinge replacement: $280-$520 per hinge set, depending on gate weight and whether we need to weld new hinge plates
- Post replacement with new footing: $650-$1,400, including concrete, new post, and re-hanging
- Rail repair and welding reinforcement: $180-$450, depending on rail material and damage extent
- Custom welding and fabrication: $120-$350 per fabricated part, quoted before any work starts
We quote the price before we touch the gate, and that price is the price. Every repair over $200 carries a $40 discount, there’s no trip charge anywhere inside the county, and we offer a free second opinion on any written estimate you’ve gotten from another company. Seniors and veterans always get 10% off, permanently. Call (877) 610-2993 for an exact quote, and have your gate style and approximate weight ready if you know them.
We Also Serve Cities Near Foxborough
We cover all of Gate Parts & Welding in Foxborough plus the surrounding towns. That includes Mansfield, Sharon, Wrentham, and Walpole. If you’re in one of those towns and need a hinge cut out and a new one welded in, call the same number: (877) 610-2993.
Serving Foxborough, MA - Our Local Coverage Area
We’re based in the Foxborough area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Foxborough
Hinges fail faster in Foxborough because they absorb two forces that neighboring towns don’t see at the same rate: Gillette Stadium event traffic repeatedly clipping gate arms and swinging gates, and Route 1 road salt accelerating corrosion on hinge hardware. Mansfield and Sharon don’t host 65,000-person crowds that need driveway space, and their local roads see less plow salt than Route 1. The combination of impact stress and salt corrosion shortens hinge life by years if the hardware isn’t inspected. Call (877) 610-2993 and we’ll take a look at your hinges before the next home game.
Yes, that’s a big part of what we do in Foxborough. We recently replaced a broken hinge post on a custom ornamental steel swing gate in a subdivision off Route 1, where a concert-night driver clipped the gate while turning around. Our crew cut out the bent post from its cracked concrete footing, welded in a new post with a re-poured footing, and re-hung the gate with LiftMaster hinges before re-aligning the operator and testing the safety photocells. The gate now swings silently and true, ready for the next Patriots Sunday. Call (877) 610-2993 for a free estimate on the same kind of repair.
In most Foxborough homes, it’s the post. Wooden gates on the town’s older ranch and garrison-colonial homes sag because the hinge post has shifted or rotted at the base, not because the panel suddenly changed shape. But when we arrive, we check both: we level the post, check the panel for warp or rot, and tell you exactly which one is causing the drop before we weld or replace anything. If it’s the post, we replace it and re-hang the existing panel so you’re only paying for what failed.
Road salt from Route 1 plowing kicks up as a fine spray that lands on your gate’s hinges, latch hardware, and operator components. Over a single winter, that salt accelerates rust on mild steel parts and seizes pivot points that would otherwise last five more years. Homes within a quarter mile of Route 1 in Foxborough see this faster than homes set back near the town center or off Chestnut Street. We recommend a spring inspection and lubrication for any automatic gate within that salt-spray zone. Call (877) 610-2993 in April and we’ll get it on the schedule.
Yes. We stock extra actuator parts, hinge sets, and weld material before the fall NFL schedule every year, because the day after a Patriots home game in Foxborough is the busiest repair day we see anywhere. Event traffic clips swing gate arms, bends hinge posts, and overwhelms remote receivers from repeated cycling. We know the pattern, and we keep the Parts on the truck so your gate isn’t stuck open for a weekend waiting on a bracket that hasn’t shipped. If your gate took a hit, call (877) 610-2993 on Monday morning and we’ll get it swinging again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Foxborough since 2001.