Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Forest Hill
Gate parts and welding in Forest Hill usually means one of three things: a post that’s leaning, a hinge that’s stripped, or a weld that finally gave up after thirty Texas summers. Most of the gates in this town were hung back when Lyndon Johnson was in office, and the Blackland Prairie clay under 76119 has been working against them ever since. We fix them where they stand. No hauling your gate to a shop. No replacing a whole frame because one rail cracked. Hal Gatewood has been doing it this way since 2001, and the person who answers when you call (877) 610-2993 is the same person who’ll show up in your driveway.
Why Gatewood Fence & Gate Is Forest Hill’s Preferred Gate Parts & Welding Company
Forest Hill’s gates are old enough to have real stories, and most of those stories involve a post that was never set deep enough. We’ve worked on ranch homes here where the original 1972 gate post sat twenty inches down in expansive clay and leaned toward the street every August. That’s not a hardware problem. It’s a footing problem. Hal has been fixing gates in Tarrant County for 29 years, and when he pulls up to a house in Forest Hill, he already knows what he’s likely to find before the truck stops rolling.
People around here don’t want a national chain that quoted low on the phone and showed up with a clipboard and a different number. They want a name they can verify. Hal’s name is on the shop, his license number is published, and if you want to look him in the eye before he touches your gate, you can drive to the shop and do that. Customers in Forest Hill call because a neighbor told them about the guy who welded a gate rail back together instead of selling them a new one. That’s the reputation that matters here.
We answer the phone with a live person, around the clock. Not a voicemail. Not a queue. When a gate in Forest Hill won’t close and your dog is eyeing the street, you don’t have time for a recording. You call, a person picks up, and we figure out what’s wrong.
Every job we do in 76119 carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround, no fine print. That promise means something to us, mostly because Hal’s name is on the invoice and he still lives in the community he serves.
Our Gate Parts & Welding Services in Forest Hill
Older gates in Forest Hill don’t fail the way new gates do. They fail at the post, at the hinge, and at the weld. That’s where we focus. These are the services we do most often here:
Hinge Replacement
Hinges on 30 to 50-year-old gates in Forest Hill are usually the first thing to go. The combination of brutal summers over 100°F and the occasional hard freeze snaps corroded hinge welds and strips screw holes. We replace hinges with heavier-duty adjustable models that let us correct sag without re-hanging the whole gate. If the hinge is welded, we cut the old one off and weld the new one on site, in your driveway.
Post Replacement
This is the single most common repair we do in Forest Hill, and it’s the one nobody sees coming. The Blackland Prairie clay under 76119 swells in wet winters and shrinks in dry summers. Shallow-set posts from the 1960s through 1980s lean, straighten, lean again, and every cycle racks the gate until hinge holes strip and welds crack. We cut out the old post, dig a deeper footing with proper concrete, set the new post plumb, and re-hang the gate so it swings square. When a post goes in the ground right, the gate stays put for decades.
Rail Repair
Welded steel gate rails crack for predictable reasons in Forest Hill. Ice loading during Tarrant County’s periodic hard freezes adds sudden downward stress to already-corroded tubular steel. A bottom rail crack that looks cosmetic is actually structural, and it spreads fast. We weld rails back to full strength on site, often without taking the gate off its hinges. If the steel is too far gone, we’ll tell you that honestly, and we’ll price you a replacement rail rather than a whole new gate.
Custom Welding
When a factory part doesn’t exist anymore, or was never very good to begin with, we weld what’s needed. Custom brackets, reinforced post caps, latching hardware, gate extensions for sagging chain-link, and frame repairs on ornamental iron gates that were installed before modern safety standards existed. If it’s steel and it belongs on a gate, Hal can weld it. The welding happens at your home, not in a shop. You watch the gate fixed in the same spot it’s hung for forty years.
Don’t see your problem listed? Call us at (877) 610-2993 and describe it. We’ll tell you honestly whether it’s a weld, a part, or a full replacement, and what each option costs before anything starts.
Trusted Brands We Service in Forest Hill
We service and stock parts for nine major gate operator brands, including FAAC, BFT, Linear, and Viking. That matters in Forest Hill because many of the older swing gate operators around here are FAAC and Viking units from the 1980s and 1990s, and their original factory parts are discontinued. We know which components can be retrofitted, which ones need a modern replacement, and where to source boards and motors that still work. We also carry common hinge assemblies, rollers, latches, and post hardware in the truck, so the job doesn’t stall waiting on a parts delivery.
Common Gate Parts & Welding Problems We See in Forest Hill Homes
Over the years, certain problems repeat themselves on street after street in Forest Hill. These are the ones we expect when someone in 76119 calls:
- Leaning posts from expansive clay. Most builder-grade and DIY gate posts from the 1970s were set less than 24 inches deep. The Blackland Prairie clay under Forest Hill moves them every season, and a leaning post strips hinge holes and racks the whole gate out of square.
- Cracked welds on aging steel. Gates built between the late 1950s and the 1980s used thinner tubular steel than modern gates, and decades of thermal expansion and contraction eventually crack the bottom rail welds, especially near the hinges.
- Obsolete operator boards. Older LiftMaster, FAAC, and Viking swing gate operators in Forest Hill often use control boards that were discontinued a decade ago. Replacing the whole operator isn’t always necessary, but occasionally the board can’t be economically repaired, and an honest assessment will tell you which side you’re on.
- Sagging chain-link at the latch side. When a chain-link gate drags and won’t latch, the problem is usually the post moving, not the gate itself. We find the post pulling away from the frame at the latch side, and resetting it is the permanent fix. New hinges alone won’t hold.
Pricing for Gate Parts & Welding in Forest Hill, TX
Gate work in Forest Hill is priced by the job, and you’ll know the number before we touch anything. Here are the ranges we typically see in 76119:
- Hinge replacement: $120-$280 depending on hinge type, gate weight, and whether welding is required.
- Post replacement: $350-$750 including digging, new post, concrete, and re-hanging the gate. Deeper footings in bad clay can push this higher.
- Rail repair (welding): $95-$225 per crack, depending on access and metal thickness.
- Custom welding: $85-$180 for typical brackets, latch repairs, and gate extensions; complex fabrications priced after a free on-site look.
What affects the price most in Forest Hill is the condition of the post and the depth of the existing footing. A gate that needs a full post excavation costs more than a hinge swap. We quote the price up front, in writing, and you agree to it before any work begins. There’s no trip charge inside the county, and any repair over $200 gets $40 off. Seniors and veterans get 10% off every job, permanently. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Forest Hill
Beyond Forest Hill, our gate parts and welding crews work in Kennedale, Fort Worth, Everman, and Rendon. If you’re in one of those towns with a gate that’s seen better days, give us a call. We keep the same hours, same pricing, and same promise everywhere we go. You can learn more about our service area on our Forest Hill page.
Serving Forest Hill, TX - Our Local Coverage Area
We’re based in the Forest Hill area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Forest Hill
Your post was almost certainly set less than 24 inches deep in the Blackland Prairie expansive clay that makes up all of 76119. In summer, the clay shrinks and cracks, the post tilts toward the street, and the hinge holes strip. In winter, the clay swells with rain and pushes the post partially back. It’s a permanent cycle until the post is cut out and reset in a proper footing. Call (877) 610-2993 and we’ll dig it out and fix it for good.
In most Forest Hill cases, we can weld it. A cracked bottom rail on a 1980s gate is usually fatigue from decades of thermal cycling, not total steel failure. We grind the crack clean, weld the rail back to full strength, and you keep the gate that matches your house. If the steel is too thin or rusted through, we’ll tell you that honestly before quoting a replacement. Estimates are free, and you’ll know the cost before work starts.
It depends on which LiftMaster model you have and whether the control board is still available. Some 1980s and 1990s boards are discontinued and can’t be economically repaired, while others have modern replacement boards that bolt right in. We diagnose it on site and show you the cheapest durable option, not the most profitable one. Call (877) 610-2993 and we’ll tell you over the phone whether it sounds like a board issue or a motor issue.
Yes, in most cases we can. Older operators without safety photocells can usually be retrofitted with aftermarket sensors that meet current safety standards, as long as the control board has the right inputs. If your old board won’t support them, we’ll quote a modern board that will, and you’ll know the full price before we start. Safety edges and photocells are worth doing right, especially on older gates where the equipment predates current standards.
In Forest Hill, it’s almost always the post. The clay moves shallow-set posts, the post leans away from the gate, and the latch side drops. Tightening hinges or adding shims fixes nothing if the post is moving. We check true plumb first, then the hinges, then the frame rail. Fix the post and the gate stops dragging for decades. One call to (877) 610-2993 gets you a straight answer and a free estimate.
One Field Story Worth Telling
On a 1970s ranch home in Forest Hill, we found a builder-grade swing gate’s hinge post set only 20 inches deep, leaning hard toward the street after a dry summer. The racked post had stripped the top hinge holes and cracked the weld at the bottom rail. We cut and replaced the post with a deeper concrete footing, welded the rail crack, and installed heavier-duty adjustable hinges with sag correction. The gate swings square again, and it won’t re-rack next wet winter. That’s the difference between fixing the post and fixing the symptom. Around here, you have to fix the post.
Call Forest Hill’s Local Gate Parts & Welding Team
If your gate post is leaning, your hinges are stripped, or a weld finally let go after decades of Texas weather, call us at (877) 610-2993. Hal Gatewood has been doing this since 2001, and he’ll be the person who shows up. Free estimates, written pricing, and a 90-Day Done Right Promise on every job in Forest Hill. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Forest Hill and surrounding Tarrant County communities since 2001.