Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Felida
Gate parts and welding in Felida usually costs between $180 and $1,400 depending on whether we’re rehanging a hinge, sistering a rotted post, or welding a cracked rail back to square. Most repairs on this side of Clark County take a morning, and we stock enough steel, hinges, and operator hardware to avoid a second trip. If your gate is down across your driveway right now, call (877) 610-2993 and a live person picks up. We’ve worked on enough Felida acreage properties to know the difference between a decorative driveway gate and one that has to hold a horse in, and that changes how we fix it.
Why Gatewood Fence & Gate Is Felida’s Preferred Gate Parts & Welding Company
Hal Gatewood has been running this outfit since 2001, and his name is on the shop. That matters when you live in Felida, where a lot of the gate work we see comes from homeowners who already paid somebody to “fix” the same gate two years ago. We show up, look at the post, look at the hinge, and tell you what’s actually wrong. That’s the whole job. We don’t swap parts that don’t need swapping just to make the invoice look busier.
Felida homeowners call us because we answer the phone around the clock and we stand behind the work with our 90-Day Done Right Promise in writing. If we fixed it and it isn’t right, Hal comes back. No runaround, no dispatch queue, no voicemail. Our Gate Parts & Welding team carries the steel, plate, and bearing stock to handle most Felida repairs the day you call. And when the fix is bigger than expected, you get the price before we start, not after.
We’ve been up and down NW 119th Street, through the acreage lanes off NW 36th Avenue, and back into the wooded lots near Felida Park enough times that we know which gates fight us and which ones just need a weld. You’ll see the same face at the hardware store later, and that’s the point.
Our Gate Parts & Welding Services in Felida
Hinge Replacement
A Felida gate spends a lot of its life wet. Shaded lots, 42 to 45 inches of rain a year, and long stretches of damp from November through March mean hinges rust fast. When a hinge pin wears oval or the barrel seizes, the gate starts dragging and the post takes the abuse. We cut off the old hinge, weld or bolt on a heavier replacement, and rehang the gate so it swings true. Most hinge replacements in Felida run $180 to $340 per hinge, including the part and labor.
Post Replacement
This is the most common call we get in Felida, especially on older horse properties. A wooden post set in the 1980s has been sitting in wet ground for 40 years, and the base is usually gone even when the top looks dry. We dig out the old post, set a pressure-treated or steel replacement in concrete, and rehang the gate the same day. When the gate is wide and heavy, we sister the post for extra stiffness. You’re usually looking at $400 to $800 for a standard single-post replacement in Felida, more if the gate has an opener mounted to it.
Rail Repair
Welded steel rails crack. Bolted rails stretch. Post-and-board rails rot from the inside out. On Felida’s large-lot driveways and pasture entrances, rail repair often means welding a cracked top rail, plating a rusted-through section, or reblocking a wooden rail that’s pulling away from the post. We do the welding on site in your driveway, so the gate doesn’t leave your property. Rail repair in Felida typically falls between $150 and $450 depending on the rail material and the length of the crack.
Custom Welding
Some gates can’t be fixed with a replacement part. When a hinge mount tears out, a frame twists, or a custom gate needs a reinforcement plate, we weld it. We’ve built brackets for opener arms, plated cracked box frames, and extended gate leaves so they close properly on uneven Felida terrain. Custom welding for gate repair in Felida runs roughly $120 to $600 depending on the complexity, and we quote it before the first spark.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Felida
We service automatic gate openers from FAAC, BFT, and Linear, plus Viking for heavier commercial and farm-duty setups. On Felida acreage properties, we see a lot of BFT and FAAC operators on driveway gates and the occasional Viking on a big pasture entrance. We keep common boards, arms, and hardware for these brands in the truck, which means we can usually get a Felida gate running the same trip instead of ordering a part and coming back next week. If you’ve got a Ghost Controls or Mighty Mule opener on a smaller gate, we handle those too.
Common Gate Parts & Welding Problems We See in Felida Homes
- Rotted hinge posts on 1980s horse-property gates. Many original Felida wooden driveway and pasture gates sit on posts that were never rated for four decades of Clark County rain. The base rots below ground level, the post leans, and the gate sags into the latch. We sister or replace the post before it tears the hinges out completely.
- Rust-through on hinges, latches, and operator mounts. Felida’s heavily treed and shaded lots hold moisture far longer than open suburban yards. That accelerates rust on any exposed hardware. We regularly cut off hinges and latches so corroded they snap rather than unbolt.
- Spring ground heave throwing swing gates out of alignment. Felida’s hillside and plateau terrain freezes and thaws each winter. When the ground heaves, gates that closed perfectly in October drag by March. Fixing the sag usually means adjusting the hinge post, not just twisting the panel.
- Retrofitted openers twisting weak 1980s gate frames. A lot of Felida homeowners want automation on a wooden post-and-board gate that was never built for motorized torque. The opener arm pushes, the frame twists, and the hinges tear out. We reinforce the rail and post before we mount the operator.
Pricing for Gate Parts & Welding in Felida, WA
Here’s what we quote most often in Felida. A hinge replacement runs $180 to $340 per hinge. Post replacement falls between $400 and $800 for a single wooden post, more for steel or if an opener is mounted. Rail repair is $150 to $450. Custom welding on a gate frame or bracket runs $120 to $600. A full gate operator retrofit, including reinforcement, starts around $900 and goes up based on gate width and opener brand.
What moves the price in Felida is post condition, gate weight, and whether the frame needs welding before the opener goes on. We give you the number before we touch anything, and it doesn’t change at the door. Inside Clark County, there’s no trip charge. If another company already gave you a written estimate, we’ll give you a free second opinion on it. And we take $40 off any repair over $200, plus a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote, and you’ll get it before any work starts.
Why Felida’s Gate Work Is Different From Vancouver Proper
Felida’s 98685 zip code has a gate profile you don’t find in the denser subdivisions just south of here. The same service call might start at a custom automated driveway gate on a wooded estate lot and end at a working pasture gate on a horse property two streets over. That dual-market mix changes how we stock the truck. A suburban gate tech carries light hardware and finish screws. We carry heavy barrel hinges, pressure-treated post stock, plate steel, and a welder, because we don’t know which gate we’re walking up to until we get there.
The existing housing stock makes it more specific. Felida’s homes were largely built between the 1970s and 1990s on oversized lots, many zoned for horses or light agriculture. A single property often has a decorative driveway gate plus one or more functional field gates. That means two or three gate problems on one parcel, each with different hardware, different post conditions, and different repair priorities. We’re set up for that. The person who shows up understands both the curb-appeal gate and the one keeping a mare off NW 119th Street.
We Also Serve Cities Near Felida
If you’re just outside Felida, we handle gate parts and welding in Hazel Dell, Lake Shore, Mount Vista, and Salmon Creek as well. Same crew, same rates, same 90-Day Done Right Promise. If you’re in Felida or any of the surrounding neighborhoods, call (877) 610-2993 and we’ll get you on the schedule.
Serving Felida, WA - Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Felida
Felida’s heavily wooded, shaded lots hold moisture far longer than open suburban yards, and with 42 to 45 inches of annual rain concentrated in the wet months, the soil around post bases stays saturated for weeks at a time. That accelerates rot at the base, even on posts that look solid above ground. We regularly dig out Felida posts that crumble at ground level while the top half is still sound. It’s a local condition, and it’s why we treat post replacement as structural work, not a quick swap. Call (877) 610-2993 if your post is leaning or the gate is starting to drag.
Yes, but only after we check the frame and post. Many original 1980s Felida post-and-board gates were built with undersized hardware that cannot handle the torque of a motorized opener. If the post is solid and the rail is strong enough, we can mount a BFT or FAAC opener directly. If the frame twists or the post flexes under pressure, we’ll weld a reinforcement plate onto the rail or sister the post first. The operator goes on a gate that can actually take it, not one that’ll tear itself apart in six months. Call (877) 610-2993 and we’ll assess your gate before quoting the retrofit.
All automatic gates in Clark County must meet UL 325 safety standards, which require monitored entrapment protection like photo eyes, safety edges, or a combination of both. That means the gate opener must detect an obstruction and reverse before it traps a person, a child, or an animal. On Felida horse properties, we also recommend a hard-wired safety loop or edge along the bottom for stock. We wire the protection in with every opener we install or repair, and it’s part of the quoted price, not an add-on you find out about later.
No, the panel is rarely the problem. Felida’s hillside plateaus freeze and heave through the winter, and when the ground thaws in spring, the hinge post shifts out of plumb. That makes the gate sag even if every part of the panel is fine. If you fix the panel without correcting the post, you’ll fix it twice. We’ll check the post for plumb, re-set or sister it as needed, and rehang the gate so it closes without dragging. Call (877) 610-2993 for a free estimate on the post work.
Yes. A lot of Felida’s large-lot and pasture gates are too far from the house to run a power line, and solar is the practical answer. We install solar-compatible FAAC, BFT, and Linear operators with panel kits sized for Clark County’s winter cloud cover, plus battery backup so the gate runs through a wet, gray stretch. We’ll mount the panel where it actually gets sun on your property, which matters on Felida’s wooded lots. Call (877) 610-2993 and we’ll tell you what your gate needs before quoting.
Call Gatewood Fence & Gate for Gate Parts & Welding in Felida
If your gate is sagging, rusted, or swinging loose on its hinges, call (877) 610-2993. Hal Gatewood has been at this since 2001, his name is on the shop, and every job carries the 90-Day Done Right Promise in writing. We’ll give you the price before we start, and we answer the phone when you call. No voicemail, no call center, no estimate that changes at the door. Just a Felida gate that works the way it’s supposed to.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Felida since 2001.