Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Felida
Gate installation in Felida typically runs $1,800-$7,500 for a standard driveway gate with operator, and we complete most installations within 5-10 business days after the site measure. That’s the honest range for this corner of Clark County, where oversized lots and long driveways change the math compared to tighter Vancouver subdivisions. Hal Gatewood has been building and installing gates since 2001, and the person who shows up to measure your Felida property is the same person who stands behind the work. Call (877) 610-2993 for a free site measure and a written price.
Why Gatewood Fence & Gate Is Felida’s Preferred Gate Installation Company
Felida isn’t a stop on a route for us. It’s one of the neighborhoods we know by the shape of its driveways. When a customer off NW 119th Street describes a shaded lot with Doug firs crowding the entry, we already know the post bases are staying wet half the year. That local read keeps us from installing a gate the same way we would in a sunny Salmon Creek cul-de-sac. We’re owner-operated, our address is published, and Hal’s name is on every invoice. A live person answers our phone around the clock, not a voicemail, not a call center three states away.
Our standing offers apply to every Felida job: $40 off any repair over $200, no trip charge inside the county, free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Every installation carries the 90-Day Done Right Promise in writing. If it’s not done right, we make it right, no runaround.
We’ve worked on enough Felida properties to know what holds up. Rain, shade, hillside heave, horse traffic past the same hinge post twice a day. These aren’t surprises to us. They’re the design conditions.
Our Gate Installation Services in Felida
Our Gate Installation team handles everything from custom ornamental driveway entries to the working pasture gate out back. On Felida acreage, those two jobs often happen on the same property, and they demand different skills. Here’s how each one works here.
Swing Gate Installation
Most Felida driveway gates are swing gates, and on the area’s rolling lots, the hinge post carries more load than anyone expects. We set posts below frost line, use through-bolted hinges on heavy panels, and choose operators matched to the gate’s actual weight, not the weight the box says. A gate sags in the hinge post, not in the middle, and that is where we start. On a hillside Felida driveway, that means a deeper footing and a bigger post than a flat suburban lot would ever need.
Driveway Gate Installation
Driveway gates in Felida run the full range: welded steel ornamental entries, aluminum estate gates, and the original 1980s wooden post-and-board gates that still swing on hundreds of properties here. When we install new, we build for the operator from day one so the frame has the reinforcement it needs. That’s the difference between a gate that runs quietly for fifteen years and one that twists its hinges by March. We quote the full price before any work starts, so the number on the invoice matches the number on the estimate.
Pedestrian Gate Installation
A separate pedestrian gate saves wear on the driveway operator and gives you daily access without cycling a 400-pound panel. We see this on Felida horse properties constantly: a steel or aluminum walk gate beside the driveway entry, matched to the main gate’s style. We install self-closing hinges, quality latches, and hardware rated for wet, shaded conditions. If the walk gate is near a pasture, we account for stock pressure and set the post accordingly.
Security Gate Installation
Security gates in Felida often start with the same question: can this keep someone out and still open easily for the people who live here? We install paired gates, high-duty operators, keypad and intercom entry, and camera integration where the property calls for it. On a wooded lot, positioning matters: we sight the gate so approach sightlines are clear, and we make sure the operator’s safety edge and photocells are set for the actual travel path, not the drawing.
Sliding Gate Installation
Sliding gates can be the right answer on a Felida driveway with a steep grade or limited swing clearance. They ride on a track or a cantilever system and don’t fight gravity the way a swing panel does on a slope. We install both styles, with the motor matched to panel weight and the track bed built for Clark County drainage. Standing water on the track is a constant in winter here, and we grade accordingly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Felida
We install and service Driveway gate operators from Linear, Viking, and DoorKing, and we keep common parts stocked so a Felida repair doesn’t wait on a warehouse three states away. We’re certified to work on nine major gate brands, and when a customer asks what opener we’d put on our own gate, those three names come up often. For a solar pasture gate with no power, we lean on Linear and Ghost Controls actuation, which we’ve had good service from on local horse properties. No brand loyalty beyond what holds up in our rain.
Common Gate Installation Problems We See in Felida Homes
- Rotting hinge posts from constant wet shade. Felida’s wooded lots get 42-45 inches of rain a year, and a fence post wrapped in Doug fir shade might not dry out until June. Untreated 1980s posts rot at the base, the gate leans, and suddenly the operator is dragging a panel it was never meant to fight. The fix is a new post set in concrete, often with a sister post for retrofit operators.
- Spring ground heave throwing swing gates out of alignment. Felida’s hillside and plateau terrain shifts every thaw. A swing gate that cleared fine in October starts dragging in March because the hinge post moved a half inch. We reset the post, not the panel. Fix the panel without the post and you’ll fix it twice.
- Undersized hardware on original post-and-board gates. Those 1980s wooden driveway gates were built with barn hinges and a latch, never meant to hold a motor. When owners now want automation, the frame and post need structural work first. We rebuild or sister the post before any opener installation can hold.
- Operators installed without proper entrapment protection. We sometimes see automatic gates on Felida properties that lack functioning safety edges or photocells. On a horse property with kids and animals moving through daily, that’s a real hazard. Every automatic gate we install meets current ASTM entrapment-protection standards, full stop.
Pricing for Gate Installation in Felida, WA
Here’s what Felida customers can expect for common jobs. A single swing driveway gate with operator and keypad entry runs $3,500-$7,500 for ornamental steel or welded aluminum. A basic single swing gate without automation lands around $1,800-$3,200. A pedestrian gate installed beside the driveway runs $900-$2,400 depending on material and hardware. A sliding gate on a hilly driveway adds $500-$1,200 over a swing in most cases because of the track or cantilever system. Solar pasture gate openers, common on Felida horse properties, run $800-$2,200 installed without trenching power across the paddock. Every price is quoted and agreed before any work starts. Call (877) 610-2993 for an exact number, and remember the estimate is free.
We Also Serve Cities Near Felida
If you’re just outside Felida, we cover Hazel Dell, Lake Shore, Mount Vista, and Salmon Creek as well. Same owner-operated crew, same written 90-Day Done Right Promise, same live answer when you call. No trip charge inside the county, wherever between Vancouver’s north edge and the county line your gate sits.
Serving Felida, WA - Our Local Coverage Area
We’re based in the Felida area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Felida
Yes, in most cases, but not by simply bolting a motor onto the existing frame. Those original Felida post-and-board gates were built with barn-grade hinges and posts that were never designed for actuator torque. We first check the hinge post for rot from the wet shaded conditions common to the area, then sister or replace the post and reinforce the gate frame before mounting the operator. That’s the only way the installation will hold. Call (877) 610-2993 and we’ll come look at your specific gate for free.
Yes. Any automatic gate that opens and closes under power requires entrapment protection: reversing edges, photocells, or both, installed to current ASTM standards. We see plenty of older Felida gates running without working safety devices, and on a property with children, horses, and daily vehicle traffic, that’s the difference between an inconvenience and a serious injury. We won’t install an operator without it.
Yes, and it’s a common request on Felida horse properties where running conduit across a paddock is expensive and disruptive. We install solar-powered operators from Linear and Ghost Controls with battery backup sized for Clark County’s short winter days. On a shaded lot, panel placement matters; we position the array where it gets the most direct sun, even if that means mounting it away from the gate. The installed cost ranges from $800 to $2,200 depending on gate size and operator duty rating.
Almost certainly, on this terrain. Felida’s hillside lots heave when the ground thaws, and wooden hinge posts with shallow footings shift enough to drag a swing gate panel. Worse, if the post base has been sitting wet all winter under shade, the wood may be rotting underground even if it looks fine at ground level. We dig out the post, inspect the footing, and reset with concrete below frost line. Show me the gate closing on its own and I’ll show you where it’s failing.
A sliding gate usually works best on a grade, because the panel doesn’t swing against gravity and the operator isn’t fighting the slope on every cycle. If a swing gate is the better aesthetic match, we size the hinge post and operator for the full panel weight and set the post deeper than a flat lot requires. We’ll give you an honest recommendation for your specific driveway when we come out. Estimates are free, and the number we quote is the number you’ll pay.
Contact Gatewood Fence & Gate in Felida
Whether you need a new driveway gate with a keypad, a solar opener on your back pasture, or a second opinion on a written estimate from someone else, call us. A live person answers, not a voicemail. Tell us about your gate and your property, and we’ll schedule a free site measure in Felida at a time that works for you. Call (877) 610-2993 today.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Felida and the surrounding Clark County communities since 2001.