Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across El Segundo
Gate parts and welding in El Segundo comes down to two problems most of the time: salt-air corrosion eating through hinge posts and roller brackets, and high-cycle commercial gates along Douglas Street and Allied Way that burn out operators from constant use. Hal Gatewood has been repairing both since 2001, and the answer is usually welding on site instead of hauling your gate off to a shop. If your swing gate sags, binds, or won’t latch, call (877) 610-2993 and a live person answers, day or night.
El Segundo sits right on the Pacific in LA County, which puts every gate west of Sepulveda Boulevard in a year-round marine layer. That salt fog is relentless on mild steel and original wrought iron. We know the houses here, the post-WWII bungalows and ranch homes packed tight west of Sepulveda, and we know what their gates look like after 60 or 70 years near the ocean.
Key Takeaways:
- On-site welding means your gate stays in your driveway, not on a trailer
- Every job carries the 90-Day Done Right Promise in writing
- Free estimates, upfront pricing, and no trip charge inside LA County
- Senior and veteran discount of 10% on every job, permanently
- Live person answers the phone 24/7
Why Gatewood Fence & Gate Is El Segundo’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop and on every invoice. He started this company in 2001 and still runs it himself, which means the person you talk to on the phone is the same guy who shows up with the welder. There’s no call center, no faceless dispatch queue, no national outfit quoting one price on the phone and charging another at the door. You call, Hal answers or calls back, and you get a straight price before any work starts.
El Segundo homeowners have learned to check a contractor’s name and license before letting them work. Hal’s address is published and his license is public record, the way it should be. The crew that serves El Segundo is background-checked and uniformed, and they’ve welded more hinge posts in 90245 than most companies have in the whole South Bay. When someone near Main Street or Grand Avenue calls about a sagging gate, we know what we’re walking into before we get there.
Response time to El Segundo is quick, often same day for repair calls, because we’re not coming from three counties over. The El Segundo jobs we run are local work for local people, and Hal treats them that way. A gate that won’t close isn’t a minor annoyance, it’s a security gap on a house that might sit empty while you’re at work. We take that seriously.
The 90-Day Done Right Promise is stamped in writing on every job. Not “up to 90 days” or “in most cases.” If it’s not done right, one call brings Hal back. That’s the whole promise. That and the $40 off any repair over $200, which is a standing offer, no haggling required.
Our Gate Parts & Welding Services in El Segundo
Hinge Replacement
Hinges on El Segundo gates fail from the outside in. Salt fog gets into the barrel, the pin seizes, and the gate starts dragging at the latch end. On 1940s and 1950s wrought-iron gates, the original hinges are often welded into the post, which means replacing them properly requires cutting out the old hinge and welding in a new one on site. A typical hinge replacement in El Segundo runs $180 to $340 per hinge, depending on whether we’re cutting out a welded hinge or bolting onto a post that’s still sound. We weld new hinge barrels, re-align the gate, and make sure it swings clear without binding.
Post Replacement
This is the most common call we get in El Segundo, and it’s almost always the same story: a mild-steel post sheared at the base from decades of salt-air oxidation, leaving the gate leaning forward and the latch binding. Fixing the panel without the post means you’ll fix it twice. Post replacement in El Segundo typically runs $450 to $900, which includes cutting out the old post, pouring a proper concrete footing, welding in a new post, and re-hanging the gate. We did exactly this for a ranch home west of Sepulveda Boulevard recently. The original post had rusted through at the base, so we cut it out, poured a new footing, and re-hung the swing gate with new Viking rollers and a LiftMaster operator rated for the coastal environment. The gate clears the driveway clean now, no binding, no sag.
Rail Repair
Slide gates along El Segundo’s industrial corridors take a beating. Rack and pinion drives on high-cycle commercial slide gates near Douglas Street wear out under 300 to 500 daily cycles, and the rail itself gets bent or misaligned from repeated use and the occasional truck bumper. Rail repair in El Segundo runs $300 to $700 for routine straightening and re-alignment, more if we’re replacing a section of rack. We weld on site, which matters when a security gate at an aerospace or energy campus can’t be down for a day.
Custom Welding
Not every repair fits a catalog part. El Segundo’s older homes often have gates that were built in the same decade as the house, and replacement parts for 1960s hardware are hard to find. Custom welding fills that gap. We fabricate brackets, rebuild hinge mounts, weld cracked frames, and reinforce posts that were never thick enough to begin with. Custom welding jobs in El Segundo run $150 to $600 depending on the scope, and we always quote before striking an arc. The price you agree to is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in El Segundo
We’re certified to service nine major gate brands, and for El Segundo we stock parts for the ones we see most on coastal properties: Viking rollers and hinges on residential swing gates, Linear and Ghost Controls operators on older ranch homes, and DoorKing on commercial slide gates east of Sepulveda. If your gate uses one of those, we can usually get parts same day or next day. We don’t swap out a whole operator because a single board failed, and we don’t replace a gate that can be welded. That’s the whole point of Gate Parts & Welding as a service: fix what’s fixable first.
Common Gate Parts & Welding Problems We See in El Segundo Homes
- Salt-air corrosion on hinge posts. The marine layer in El Segundo accelerates oxidation on mild steel faster than inland cities like Hawthorne or Inglewood. A post that would last 30 years in Hawthorne might shear at the base in a decade here, especially on homes west of Sepulveda Boulevard.
- Sagging swing gates on 1940s-1960s wrought iron. Original residential swing gates without proper post footings lean forward in El Segundo’s sandy coastal soil. The latch and lock hardware binds and eventually breaks, and the gate starts scraping the driveway or walkway.
- Worn rack and pinion drives on commercial slide gates. Along Douglas Street and Allied Way, high-cycle slide gates run 300 to 500 cycles per day. That wears out rack and pinion drives and safety photocells, leading to entrapment sensors failing or operators burning out.
- Rusted roller brackets on original gates. Roller brackets on 1940s and 1950s gates are often mild steel, and decades of salt fog have eaten them through. The rollers seize, the gate drags, and eventually the gate won’t move without help.
Pricing for Gate Parts & Welding in El Segundo, CA
Here are the ranges we quote for gate parts and welding work in El Segundo, based on jobs we’ve done in 90245:
- Hinge replacement: $180-$340 per hinge
- Post replacement with new footing: $450-$900
- Rail repair and re-alignment: $300-$700
- Custom welding fabrication: $150-$600
- Rusted roller bracket replacement, welded: $120-$280 per bracket
These prices are quoted and agreed before any work starts. Not an estimate that might creep up at the door, a written price. Free estimates on everything, no trip charge inside LA County, and $40 off any repair over $200. If you have a written estimate from another company, Hal will give you a free second opinion. He’s not trying to win the bid, he’s trying to tell you what actually needs fixing.
We Also Serve Cities Near El Segundo
We work throughout the South Bay. If you’re in Gate Parts & Welding in El Segundo territory or one of the neighboring communities, we cover Lennox, Del Aire, Hawthorne, and Marina del Rey. Call (877) 610-2993 and we’ll let you know if we can get someone out the same day.
Serving El Segundo, CA - Our Local Coverage Area
We’re based in the El Segundo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in El Segundo
The hinges aren’t the cause of the sag, the post is. In El Segundo’s sandy coastal soil, original residential gate posts without proper footings lean forward over time, which shifts the entire gate frame and makes new hinges bind and wear prematurely. Replacing hinges without correcting the post is a temporary fix. The post needs to be re-set or replaced, and that’s where we start. Call (877) 610-2993 for an exact assessment, estimates are free.
Yes, in most cases we can cut out the old post and weld a new one onto the existing concrete footing, provided the footing is sound. If the footing itself has shifted or cracked from the soil movement, we’ll need to pour a new one. That’s a judgment call Hal makes on site, and he’ll show you exactly what he’s seeing before any work begins.
High-cycle slide gates near Douglas Street and Allied Way need operators rated for 300 to 500 cycles per day, not residential-grade units. DoorKing and Viking both make commercial slide operators that handle that load, and they’re built to work with the card readers and keypads aerospace and energy facilities already use. These jobs often require advance clearance with facility security, and we coordinate that before anything gets welded or wired.
Absolutely. Rusted roller brackets on original wrought-iron gates are one of the most common things we weld in El Segundo, particularly on homes from the 1940s through the 1960s. We cut out the old brackets, weld in new ones matched to the gate, and re-hang the gate with new rollers. The gate stays on its hinges the whole time. That repair typically runs $120 to $280 per bracket, depending on access and bracket size.
If the operator stays in place and you’re only getting welding work done on the gate itself, the existing entrapment protection should remain unchanged. But if we’re re-aligning a slide gate or replacing the rack, the safety photocells and edges need to be re-positioned and re-tested to make sure they still work. A slide gate that doesn’t reverse when someone’s in the path is a serious injury hazard. We test every safety device after any re-alignment and tell you plainly if something needs replacing. Call (877) 610-2993 and Hal will walk you through what your gate needs.
Call Gatewood Fence & Gate for Gate Parts & Welding in El Segundo
You don’t have to live with a sagging gate or a post that’s rusting through. Call (877) 610-2993 for a free estimate, and a live person will answer, no matter the hour. Hal will give you an honest price, do the work right, and put the 90-Day Done Right Promise in writing. His name is on the shop, the shop is down the road, and that’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving El Segundo since 2001.