Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Echo Park
Gate parts and welding in Echo Park means working on steep hillside driveways, tight shared access points, and century-old iron and wood that deserves careful repair rather than a full teardown. A typical hinge replacement in Echo Park runs $165-$285, and a custom weld repair on a period iron gate usually lands between $225-$475 depending on how much rust and rot has set in. We’re Gate Parts & Welding specialists who weld on site in your driveway, and you can reach a live person any hour at (877) 610-2993. Hal Gatewood has been fixing gates himself since 2001, and the work carries a written 90-Day Done Right Promise.
Why Gatewood Fence & Gate Is Echo Park’s Preferred Gate Parts & Welding Company
Echo Park has its own set of rules for gate work. Streets climb at angles that surprise people who don’t live here, and half the homes are older than the people living in them. That’s the world we work in every day. When a gate sags in the hinge post, not in the middle, that’s where we start. When a swing arm binds on a pitched driveway, we don’t keep adjusting the same part and hoping for a different result. We spec the right configuration for the slope.
Echo Park homeowners call us because we show up when we say we will, and the person who answers the phone is the same person whose name is on the invoice. Hal Gatewood’s shop is down the road, not three states over. If you want to look him in the eye before he touches your gate, drive over. We also carry a strong local reputation in the 90026 ZIP, and we’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment.
Every job carries the 90-Day Done Right Promise in writing. One call brings us back, no runaround. Every estimate is free, and the price we quote is the price you pay before any work starts. No trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Echo Park
Hinge Replacement
On Echo Park’s older homes, hinges are often the original wrought iron or heavy wood cleats that have spent decades under the tree canopy. Trapped moisture rots the wood and rusts the iron, and eventually the hinge shears mid-swing. We replace hinges with matched period hardware where the Angelino Heights HPOZ requires it, or with heavier-gauge modern steel where it doesn’t. The gate goes back up level, and it stays up.
Post Replacement
When a post rots or shifts on a hillside lot, the gate will never close right until the post is addressed. We cut out the old footing, pour a new one with slope corrections, and set the post plumb. On sloped driveways off streets like Baxter, the post has to be set for the grade, not for a level sidewalk. That’s the difference between a gate that latches and one that bangs open every time the wind picks up.
Rail Repair
Bottom rails on wood gates hold moisture and rot from the inside. Top rails crack under the weight of a gate that has been sagging for years. We scarf in new sections on period wood gates when the rot is localized, or rebuild the rail entirely when it’s gone too far. Welded steel rails on old iron gates get re-welded in place, with the finish matched as close as the metal allows.
Custom Welding
Some Echo Park gates can’t be bought off a shelf. Short driveways that dead-end into a hillside, oddly angled property lines, or a side yard too narrow for a standard swing all call for custom fabrication. We weld on site, which means your gate doesn’t leave your driveway, and you see the work as it happens. Custom steel frames, gate extensions, hinge plates, and latch reinforcement are all part of the job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Echo Park
We work on FAAC, BFT, Linear, and Viking openers regularly here in Echo Park, along with five other major brands, for any Echo Park Gate Motor & Opener repair. When your operator needs a control board or a limit switch, we don’t have to order everything sight unseen. We keep common parts on hand for the brands we see most in the 90026 ZIP, which means less waiting and fewer return visits. A live person answers the phone 24/7, so if your gate stops working at 11 p.m. and you need to get your car out, call (877) 610-2993 and Hal or his crew will talk you through it.
Common Gate Parts & Welding Problems We See in Echo Park Homes
- Swing arms that bind or fail to latch on steep driveways. A standard swing-gate arm is built for a flat approach. On Echo Park’s cross-slope grades, the arm fights the pitch and either stalls the opener or leaves the gate resting open. We spec counterweighted arms or convert to a slide-gate track configuration.
- Rusted wrought-iron hinges and posts on pre-1920s homes. The dense tree canopy and shaded canyon-facing lots common in Echo Park hold moisture against gates longer than sunnier LA areas. Original iron rusts through, then shears off mid-swing, sometimes when someone is walking through.
- HPOZ complications on Angelino Heights period gates. Homeowners in the Historic Preservation Overlay Zone can’t always swap a rotted wood gate for a steel one without design review. We match existing materials and profiles so period gate repairs don’t stall at City Hall.
- Shared driveway gates that have to work for everyone. Two neighbors, one gate, and a pedestrian path that has to stay open while we work. We weld and reinforce in place so the gate keeps functioning for pedestrians and vehicles through the repair.
Pricing for Gate Parts & Welding in Echo Park, CA
Here’s what you can expect to pay in Echo Park’s market. Hinge replacement on a standard residential gate runs $165-$285 per hinge including hardware and labor. Post replacement is $325-$650 depending on footing depth and whether the post is wood or steel. Rail repair ranges $145-$395 depending on the extent of rot or rust. Custom welding jobs start around $225 for simple crack repairs and run up to $475 or more for custom frames or gate extensions. The price is agreed before any work starts, and there’s no trip charge inside the county. Call (877) 610-2993 for a free estimate, and ask about the $40-off-any-repair-over-$200 offer.
We Also Serve Cities Near Echo Park
Our crew works throughout the hills and flatlands around Echo Park, including Silver Lake, Koreatown, Los Angeles, and Hollywood. If your property sits right at the edge of the 90026 ZIP, call us and we’ll come take a look. Gate Parts & Welding in Echo Park means we know these streets, these slopes, and these old gates.
Serving Echo Park, CA - Our Local Coverage Area
We’re based in the Echo Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Echo Park
Yes, because we’ve done it before. Angelino Heights is LA’s oldest Historic Preservation Overlay Zone, and period gates fall under design review. We match existing materials and profiles rather than substituting modern steel when the HPOZ restricts it. On a 1920s Craftsman off Baxter Street, we replaced a rusted hinge post with the same dimensional wood, poured a slope-corrected footing, and the gate now opens without binding and meets UL 325. Call (877) 610-2993 if you’re in the HPOZ and want to talk through what’s possible before you file anything.
Because the ground it’s mounted on isn’t level. Echo Park’s cross-slope grades mean a standard swing-gate arm has to work against the pitch, and the opener either stalls or leaves the gate resting open. The fix is usually a counterweighted arm or a conversion to a slide-gate track. We diagnose this free, and we won’t sell you a new opener if the arm is the problem.
We do, and we weld on site in your driveway. Hillside lots often need a gate that swings up a grade, which calls for a heavier frame and reinforced hinge points. We custom-fabricate steel frames, weld hinge plates and latch reinforcement, and match the finish as close as the existing gate allows. The gate stays in your driveway the whole time.
We keep it working while we’re on the job. Shared driveway gates can’t be taken down for a week. We brace, weld, and replace components in place so the gate stays functional for pedestrians and vehicles. We also coordinate with both property owners if access or a temporary inconvenience is needed.
Yes, and on Echo Park’s narrow, steep lots that’s often the only option that works. A slide-gate track runs along the property line instead of arcing into the driveway. Tight lots, walls, and carports make slopes and zero-swing situations common here, and we install and weld slide-gate tracks with Gate Access Control in Echo Park that holds up to the terrain.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Echo Park since 2001.