Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Echo Park
Gate installation in Echo Park usually runs between $1,800 and $6,500 for a standard driveway gate, and most jobs take one to three days once materials are on hand. We work the hills, the tight lots, and the old HPOZ streets around Echo Park every week, so we know what holds up and what doesn’t. Call (877) 610-2993 and you’ll get a live person, not a recording. Hal Gatewood started this shop in 2001, and his name is still on the door.
Why Gatewood Fence & Gate Is Echo Park’s Preferred Gate Installation Company
Echo Park isn’t an easy place to hang a gate. The driveways pitch sideways, the lots are narrow, and half the original posts are older than most companies we get called out to fix. We have spent years on streets like Baxter, Alvarado, and Sunset figuring out what actually works here. A gate sags in the hinge post, not in the middle, and that is where we start. Most of our Echo Park work comes from neighbors telling neighbors, because when you fix a gate on one hillside house, three more call the next week.
Every job gets the 90-Day Done Right Promise in writing. If it’s not right, one call brings Hal back. No runaround. No “that’s not covered.” We also answer the phone 24/7 with a live person, which matters when your gate quits at 6:30 in the morning and your car is stuck behind it. The estimate you get is the price you pay. Nothing changes at the door.
Our Gate Installation Services in Echo Park
Driveway Gate Installation
Most Echo Park driveway gates are either hillside swing gates or tight-lot sliding gates. On sloped driveways like the ones off Baxter, a standard swing arm binds before the latch engages, so we spec counterweighted arms or move to a sliding track configuration. We also keep the driveway usable during the work. If you have one car and no street parking, we phase the install so you’re never locked out. Typical driveway gate installs in Echo Park run $2,200 to $6,500 depending on steel vs. aluminum and whether we’re automating it.
Pedestrian Gate Installation
Pedestrian gates in Echo Park are usually attached to stairs, retaining walls, or a side yard that slopes in two directions at once. We set posts into concrete or rock, shim the frame so it doesn’t sag in year one, and match the latch to the gate weight, not the other way around. Expect $900 to $2,400 for a new pedestrian gate with hardware. If you need a lockbox or intercom plate, we cut and weld that on site.
Sliding Gate Installation
Sliding gates are the workhorse for Echo Park lots where there’s no room to swing a gate into the street or across the driveway’s cross-slope. They ride on a track or cantilever, and they don’t care how steep the ground is. We install rack and pinion drives, weld the track supports level, and set the motor so it doesn’t fight the grade. Sliding gate installs here typically run $3,000 to $7,500 with automation.
Swing Gate Installation
A swing gate works on flat or gently sloped driveways, and we see them all over the flats and the lower hills around Echo Park. The trick is the post: on old lots the original post is either rotted or undersized for a modern automatic arm. We reinforce or replace the post before we hang the gate, so the operator isn’t pulling itself out of the wood in eight months. Swing gate installs run $1,800 to $5,500 for a single, more for a double.
Security Gate Installation
Security gates in Echo Park often combine a steel or wrought-iron driveway gate with a matching pedestrian gate and a keypad or intercom. On narrow lots we add safety edges and UL 325 entrapment protection, because the space between the gate and a retaining wall can be under a foot. A full security gate package with two posts, welded steel, and automation runs $4,000 to $9,000 depending on width and access control in Echo Park.
Double Gate Installation
Double gates split the load across two leaves, which is useful for wide driveways on the flatter streets off Sunset and Glendale. We weld the center stop and set both actuators so the leaves open and close in sequence without slamming. Expect $2,800 to $6,800 for a standard double gate with separate operators.
For the full picture on what we build, see our Gate Installation services. And if you’re anywhere in the 90026 ZIP, this is what we do all week: Gate Installation in Echo Park is what this page is for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Echo Park
We stock gate parts and do welding in Echo Park for Linear, Viking, Ghost Controls, and DoorKing because those are the operators we see most on Echo Park gates. When your Viking slide operator quits on a Friday, we don’t have to order a board from somewhere and tell you to wait until Tuesday. We keep common boards, arms, and safety edges on the truck or at the shop. We’re certified on all four brands plus five others, so we’re not guessing at wiring diagrams. We’re reading them.
Common Gate Installation Problems We See in Echo Park Homes
- Swing gate binds on a cross-slope driveway. Streets like Baxter pitch so hard that a standard arm won’t carry the gate to the latch. We switch to a counterweighted arm or a sliding track, and we test the full travel before we leave.
- Hardware tears out of a rotted post. Echo Park’s shade and moisture hold water against old wood posts. New hardware in a rotten post fails within a year. We reinforce or replace the post first, even when it adds a day to the install.
- Operator trips or crushes near a retaining wall. Tight lots leave inches between the gate and the hillside. Without UL 325 entrapment protection and a properly set safety edge, an automatic gate can crush a person or a dog. We spec edges, photo eyes, and force limits on every automated install.
- HPOZ rules block a modern replacement. In Angelino Heights, original Victorian gates can’t just be swapped for modern panels without design-review approval. We rebuild period-appropriate wrought iron on the existing hinge post, which satisfies the review board and the homeowner.
Pricing for Gate Installation in Echo Park, CA
Here’s what we charge, plainly. A basic single swing gate starts around $1,800. A sliding gate with rack and pinion automation runs $3,000 to $7,500. A full security gate with welded steel, matching pedestrian gate, and keypad runs $4,000 to $9,000. Pedestrian gates alone are $900 to $2,400. What moves the number is gate width, steel gauge, automation, post condition, and whether you need HPOZ approval work. The price we quote is the price you pay, before we start, every time. Call (877) 610-2993 for a free estimate. We also honor $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Echo Park
We install gates across Echo Park and the surrounding neighborhoods, including Silver Lake, Koreatown, Los Angeles, and Hollywood. If you’re just outside the 90026 ZIP, call anyway. We’re not far, and we know these streets.
Serving Echo Park, CA - Our Local Coverage Area
We’re based in the Echo Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Echo Park
Because a swing gate arm binds when the driveway cross-slope exceeds a few degrees, and on hills like Baxter the gate never reaches the latch before the operator trips. A sliding gate rides a level track and doesn’t fight the grade. We’ve installed Viking slide gates with rack and pinion drives specifically for this. Call (877) 610-2993 and we’ll look at your driveway.
Often yes. Angelino Heights is LA’s oldest Historic Preservation Overlay Zone, and original Victorian-era ornamental gates fall under design-review restrictions. Replacing an original gate with a modern panel usually requires approval. We rebuild period-appropriate wrought iron on the existing hinge post instead, which usually satisfies both the board and the homeowner’s budget.
A sagging gate is a hinge post problem, not a middle-of-the-gate problem. Echo Park’s older posts are frequently original wood or wrought iron, rotted or rusted after decades of shade and moisture. We reinforce or replace the post, then re-hang the gate so it latches clean on the first try - that’s standard gate repair in Echo Park. Fix the panel without the post and you’ll fix it twice.
Yes. We treat vehicle and pedestrian access as two separate concerns. On a narrow lot we set the operator low and tight to the post, add safety edges and photo eyes, and often add a separate pedestrian gate so you’re not walking through the driveway gate every time. We did exactly that on a Baxter Street hillside, keeping the pedestrian gate working for the tenants during the whole job.
It depends on your tree canopy. Echo Park’s shaded canyon lots block solar panels badly, so most solar openers underperform here. If your gate gets four or more hours of direct sun daily, solar can work. Most Echo Park gates need a wired operator, and we run the power properly, including the run to your panel and the safety edges. Call (877) 610-2993 and we’ll tell you what your site can support, before you buy anything.
What Makes Echo Park Gate Installation Different
Echo Park is not a place you can learn from a spec sheet. The 90026 ZIP includes Angelino Heights, LA’s oldest Historic Preservation Overlay Zone, where Victorian-era ornamental gates cannot be replaced without design-review approval. So gate installation here often means rebuilding period-appropriate wrought iron on the existing hinge post rather than swapping in modern panels. That’s not a limitation. It’s a discipline. We weld on site, match the original iron patterns where possible, and talk to the HPOZ reviewer before you do.
The other thing is the grade. Baxter Street is one of LA’s steepest, and dozens of Echo Park driveways pitch sideways hard enough that a standard gate arm binds before the latch engages. We’ve replaced out-of-area installs where a swing gate was stuck open against the uphill stop for six months. On one Baxter hillside, we installed a Viking slide gate with rack and pinion drive because the cross-slope was that severe. We poured new post footings into the slope, kept the pedestrian gate functional for the tenants the entire time, and routed the loop detector so the gate free-exits downhill without a separate keypad entry. That’s not a national-installer move. That’s knowing Echo Park.
And the lots are tight. Shared driveways, rights of way, and retaining walls mean you cannot just sprawl a gate across the property line. We keep vehicles and pedestrians moving during the work, even when that means phasing the install across two days. A gate installation that shuts down your only driveway is not acceptable here. So we don’t do that.
Call (877) 610-2993 for a free estimate on gate installation in Echo Park. A live person answers. We’ll schedule a time that works for you, quote the price in writing, and stand behind it for 90 days. Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Echo Park since 2001.