Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Eaton
Gate parts and welding in Eaton, OH usually means one of two things: a hinge pin that’s worn oval, or a post that frost has pushed out of plumb. Most Eaton jobs we see sit somewhere in between, and the fix almost always involves a welder, not just a parts bag. We’re Gatewood Fence & Gate, owned by Hal Gatewood since 2001, and we work on farm gates, driveway gates, and pasture gates all over Eaton and Preble County. If your gate sags, drags, won’t latch, or won’t slide, call us at (877) 610-2993 and we’ll talk it through. A live person answers, day or night.
Why Gatewood Fence & Gate Is Eaton’s Preferred Gate Parts & Welding Company
Most of our Eaton customers found us after another company told them the gate couldn’t be fixed. Hal’s been welding gates since 2001, so when he hears “can’t be fixed,” he hears “didn’t want to bother.” We carry a truck with a portable welder, grinder, and a stock of steel flat bar, pipe, and hinge components because Eaton’s farm gates don’t match any catalog. That’s the difference. The person who quotes your job is often the person who does the job, and Hal’s name is on the invoice. If something isn’t right, the 90-Day Done Right Promise means one call brings him back.
We answer the phone 24/7. Not a voicemail, not a call center three states away. Dispatch for Eaton jobs is coordinated from our Cleveland office, but the crews working your driveway are local to southwestern Ohio and know the roads, the soil, and the gates out here. We also honor a standing 10% discount for seniors and veterans on every job, no questions asked. A free second opinion on any written estimate is yours for the asking too.
Our Gate Parts & Welding Services in Eaton
Here’s what we actually do out here, and what it looks like on an Eaton property. These four services account for most of what we weld, shim, rehang, or rebuild each week across the 45320 zip code.
Hinge Replacement
On an Eaton farm gate, “hinge replacement” rarely means unbolting an old one and bolting on a new one. Off-the-shelf hinge barrels don’t always match the pipe size the original owner welded on in 1982. We measure the pivot barrel, cut out the worn strap, and weld a new greasable hinge barrel to fit the existing post. That’s the job. On residential driveway gates near the historic downtown square, hinge work is more straightforward, but we still check the post first, because a hinge that fails twice is usually a post problem.
Post Replacement
Eaton’s clay-heavy soil is hard on gate posts. Freeze-thaw cycles heave them forward or sideways, which pulls the latch out of alignment and makes the gate drag across the drive. Post replacement here means digging deep enough to get below the frost line, setting the new post in concrete, and often resquaring both posts before the gate goes back up. If your gate post leans even a half inch, new hinges will buy you a few months and then fail again. We fix the post first. We’d rather do that once than do hinges twice.
Rail Repair
Sagging gate rails are common on welded pipe gates, especially longer rural gates spanning 12 to 16 feet. The top rail bows, the pickets twist, and the latch post no longer lines up. Depending on the damage, we weld in a rail brace, sleeve a split section of pipe, or reinforce the top rail with angle iron. On ornamental gates around Eaton’s older homes, we can often match the original steel profile closely enough that the repair disappears once it’s painted.
Custom Welding
This is where a lot of Eaton work lands. A gate built from surplus pipe has a hinge barrel diameter that matches nothing in a parts catalog. A gate post is 3 inches too wide for the opening. A latch has to mount around an existing fence rail nobody wants to cut. We weld on site, in your driveway or pasture, so the gate never leaves your property. No hauling, no shop fees, no two-week wait. Custom welding isn’t our fallback; around Eaton, it’s usually the first and only right answer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eaton
We service and install hardware from Linear, Viking, Ghost Controls, and DoorKing, among others. If your gate opener or latch came from one of those brands, we can order the exact part or fabricate a bracket to make it fit a homemade gate. For Eaton’s older farmsteads, the reality is that many gates were never tied to any brand at all, which means our welding torch matters more than a parts catalog. We keep common hinge barrels, roller assemblies, and latch hardware on the truck so that if we can fix it today, we do.
Common Gate Parts & Welding Problems We See in Eaton Homes
After 29 years of this work, these are the patterns that show up again and again in Eaton. If any of these sound familiar, that’s most of the diagnosis already done.
- Post heaving on rural drives: Posts originally driven 24 inches deep work their way up and out of plumb during Eaton winters. The gate latch misses, the hinge binds, and the whole thing needs a reset before anything else makes sense.
- Non-standard welded hinges: We regularly find hinges made from whatever steel was lying around the farm. No replacement barrel exists anywhere. The fix is cutting out the old hinge and welding a new one to the existing gate.
- Sliding gate track failures on tight lots: Several Eaton homes near West Israel Street and along Richmond Pike have shared driveways or narrow rights of way where a swing gate simply won’t fit. Those sliding gates wear out rollers and rack, and when they bind, residents can’t get in or out.
- Cracked hinge straps on long pipe gates: A 16-foot pipe gate works like a pry bar against its hinges. Over time, the strap cracks right at the weld. Bolting on a hardware-store strap rarely holds, which is why we weld a new flat bar hinge with a greasable barrel instead.
Pricing for Gate Parts & Welding in Eaton, OH
Here are honest numbers for the Eaton market, based on what we quote week to week. A basic hinge replacement, welding a new greasable barrel, runs $180 to $320 per hinge. Post replacement with digging below the frost line and concrete-setting runs $350 to $650 per post, more if we’re working around an existing opener assembly. Rail reinforcement or sleeve repair runs $150 to $400 depending on length and steel size. Custom welding jobs, the farm gates with no matching parts, typically run $90 to $125 per hour plus steel, and most fall between $250 and $700 total. We quote a firm price before we start, we hand over the exact same price when the work is done, and estimates are free. There’s also $40 off any repair over $200, and no trip charge inside the county. Call (877) 610-2993 and get the number before you decide anything.
We Also Serve Cities Near Eaton
Our Gate Parts & Welding crews work throughout Preble County and the surrounding area. If you’re just outside Eaton in Brookville, Germantown, Trotwood, or Clayton, the same local team can reach you. Same upfront pricing, same 90-Day Done Right Promise, and the same person who answers the phone.
Serving Eaton, OH - Our Local Coverage Area
We’re based in the Eaton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Eaton
Yes. That’s a routine job for us on Eaton farmsteads. We cut out the worn barrel, measure the existing hinge pin and gate post, and weld a new greasable barrel to match. The gate never leaves your property. Call (877) 610-2993 and we’ll set a time to look at it.
In most cases, yes. We can shore up the gate panel, remove the hinge post, dig down past the frost line, and set a new or existing post in concrete without disconnecting the opener’s wiring or mounting brackets. The opener may need a slight realignment once the post is plumb, and we handle that as part of the job.
Typically, yes. On tight Eaton lots where a swing gate lacks room to arc, we convert to a sliding gate with track and rollers. The conversion usually starts around $1,200 to $2,800 depending on gate weight and existing posts, and we quote it before any metal is cut. Slide gates also let you keep full driveway width for vehicles.
We can source LiftMaster and Ghost Controls parts, and for the welded pipe gates where those parts don’t directly fit, we fabricate a bracket or hinge assembly on site so they work. If the part exists, we order it. If it doesn’t, we build it. That covers most of Eaton’s older gate inventory.
Most of the time, yes. We weld rail braces or sleeve the weak sections, then reset the hinge post in concrete below the frost line. Replacing the whole panel is a last resort and usually unnecessary. Get a free estimate at (877) 610-2993 before you spend on a whole new gate.
Contact Gatewood Fence & Gate: Serving Eaton, OH with on-site welding, gate part replacement, and repairs that hold through Preble County winters. Call (877) 610-2993 for a free estimate, answered by a live person any hour. Your price is quoted before work starts, in writing, and backed by the 90-Day Done Right Promise.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Eaton and Preble County since 2001.