Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Del City
When a gate post leans in Del City, it’s rarely the hardware’s fault. It’s the clay. Oklahoma County’s shrink-swell soil moves with every wet spring and dry summer, and a post set in 1962 has been moving for sixty years. We come out to Del City, look at the post before the hinge, and fix the problem where it actually starts. Hal Gatewood has been welding and repairing gates since 2001, and he’ll tell you straight: fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 and a live person answers, day or night.
Why Gatewood Fence & Gate Is Del City’s Preferred Gate Parts & Welding Company
Hal’s name is on the shop, and the shop is close enough that Del City homeowners can drive over and look him in the eye. That’s the oldest accountability there is. We’re the company that welded a hinge bracket back onto a 1960s ranch home gate off SE 29th Street, then reset the post deeper below the frost line because tacking on new hinges wouldn’t have held past the next rainy season. Local knowledge like that comes from spending decades in Oklahoma County, not from a training video.
Customers in the 73115 ZIP call us because we answer the phone with a live person around the clock, and because every job comes with the 90-Day Done Right Promise in writing. Not “up to” 90 days. Not “in most cases.” If it’s not done right, one call brings Hal back. We’re locally owned and owner-operated, with a published address and license number anyone can look up. The person who quotes the job is the person who does the job.
What Makes Our Approach Different in Del City
- We inspect the post first. A gate sags in the hinge post, not in the middle, and in Del City that post is almost always moving.
- We weld on site. Your gate stays in your driveway. We don’t haul it off and we don’t swap parts that don’t need swapping.
- We stand behind the work. The 90-Day Done Right Promise is stamped on every invoice, not buried in fine print.
- We respect your time and your budget. Pricing is quoted and agreed before any work starts. No surprises at the door.
Our Gate Parts & Welding Services in Del City
Most Del City homes were built between 1948 and 1975 for Tinker Air Force Base families. That means the gates, the posts, and the operators are all aging together. Here’s where we spend most of our time in your ZIP code.
Hinge Replacement
Hinges on 50-plus-year-old gates in Del City have usually outlasted their useful life twice over. But before we touch a hinge, we check the post for plumb. If the post has moved, new hinges on a leaning post fail just as fast as the old ones did. We weld heavy-duty adjustable hinges for chain-link gates and mortise-style hinges for wood privacy gates, matching the original hardware’s footprint so the gate hangs where it always has.
Post Replacement
This is the repair that fixes the other repairs. Del City’s expansive clay pushes posts out of plumb every spring when the ground takes on moisture, and again in August when it dries and contracts. A hinge post that was square in March can be leaning three degrees by late summer. We reset posts in deeper concrete footings below the frost line and below the active movement zone, which is the only way to stop the seasonal heave from coming back next year. In some cases we’ll weld a brace or gusset onto the existing post if it’s structurally sound and only the upper section has twisted.
Rail Repair
Top and bottom rails on older Del City chain-link gates take a beating from decades of Oklahoma ice storms and daily use. When the rail bends, the whole gate frame follows. We straighten what’s salvageable and weld new sections where the metal is fatigued. For wood privacy gates from the 1980s and 1990s, cracked or rotted rails are common at the joint where the rail meets the stile. We replace the rail, reinforce the joint with welded steel brackets where it makes sense, and re-square the gate before it goes back on its hinges.
Custom Welding
Older Del City gates rarely have standard post spacing or standard hinge geometry. That’s what custom welding is for. We fabricate hinge brackets, latch plates, roller mounts, and post caps to match whatever was there originally, or to improve on it. If your gate has non-standard post spacing from a 1960s installation, we’ll build the bracket to fit the gate you have rather than making you buy a gate that fits the bracket we sell. On a 1960s ranch home just off SE 29th Street, our crew welded a new hinge bracket to a post that had torn loose after years of clay-driven lean, then reset the post in a deeper footing. The homeowner also got a modern keypad entry latch, and the gate stayed square through the summer drought.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Del City
We’re certified to service nine major gate brands, and for Del City’s older operators we regularly work on Linear, Viking, and DoorKing equipment from the 1980s and 1990s. Those control boards were built well, but decades of Oklahoma heat and ice storms take a toll. We carry common parts for these brands on the truck, and when we need something unusual, our relationship with local suppliers means Del City customers aren’t waiting two weeks for a backordered circuit board. If you’ve got a gate motor that’s been clicking but not opening, call us before you assume it’s dead. Often it’s a $90 control board repair, not a $900 motor replacement.
Common Gate Parts & Welding Problems We See in Del City Homes
- Clay-driven post lean. Del City sits on Oklahoma County’s expansive shrink-swell clay. Every wet spring the ground swells, every dry summer it contracts, and posts set 50-70 years ago were never deep enough to avoid the movement zone. The gate starts dragging at the latch side, or the top hinge tears free from the post. That’s a structural problem, not a hardware problem.
- Ice-storm frame damage. The OKC metro gets some of the most severe ice storms in the country. Older lightweight aluminum and wood swing gates bow under ice loading, cracking welds at the hinge post and throwing the gate’s rack and pinion out of alignment. We see this every year in Del City’s older neighborhoods.
- Obsolete operator control boards. 1980s and 1990s slide gates near the older housing stock around Tinker AFB often run on control boards that are simply no longer made. The gate sticks half-open, the keypad stops responding, or the motor runs but the gate doesn’t move. We repair what’s repairable and retrofit what isn’t, often without replacing a motor that still has years of life.
- Worn gate rollers on slide gates. Older slide gates in Del City have rollers that were greased maybe twice since the Carter administration. When the rollers wear flat, the gate rides lower, scrapes the track, and eventually binds. We replace rollers and adjust the track, and the gate rolls smooth again without a full teardown.
Pricing for Gate Parts & Welding in Del City, OK
Here’s what you can expect to pay in Del City for common gate parts and welding work:
- Hinge replacement (chain-link or wood, parts and labor): $95-$240 per gate. Heavy-duty or custom-welded hinges run higher.
- Post replacement with proper concrete footing below the movement zone: $280-$550 per post, depending on depth and whether we need to weld a new hinge bracket or rehang the gate.
- Rail repair (straighten and weld, or replace a rail section): $140-$320.
- Custom welding for brackets, latch plates, or post caps: $110-$275 depending on complexity and materials.
- Roller replacement for slide gates: $120-$260 including track adjustment.
Every price is quoted and agreed before we start. No trip charge inside the county. Seniors and veterans get 10% off permanently, and any repair over $200 gets $40 off. If someone else quoted you a written estimate, we’ll give you a free second opinion. Call (877) 610-2993 and we’ll walk through what you’ve got.
We Also Serve Cities Near Del City
If you’re in Del City, you’re close to Gate Parts & Welding crews who service the whole Oklahoma County area. We work in Midwest City, Oklahoma City, Moore, and The Village on the same schedule as Del City. Dispatch and scheduling are coordinated from our Oklahoma City office, and crews serve Del City locally, so you’re never waiting on someone from across the state.
Serving Del City, OK - Our Local Coverage Area
We’re based in the Del City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Del City
Because the post is moving. Del City’s expansive clay soil swells in spring and contracts in summer, pushing posts out of plumb in a seasonal cycle. New hinges on a leaning post fail just as fast as the old ones did. The fix is a post reset below the movement zone, or a welded brace if the post is still structurally sound. Call (877) 610-2993 and we’ll check the post plumb before we touch a single hinge.
Yes, in most cases. The gate itself needs to be square and the post solid, which we can assess and correct first. Then we fit a modern opener with safety photocells, often working with brands like LiftMaster, Linear, or DoorKing. We’ll quote the retrofit before we start, and the 90-Day Done Right Promise applies to the whole job. Call (877) 610-2993 for a free estimate.
Yes. Older slide gates in Del City, especially those installed in the 1980s and 1990s, often have rollers that have never been replaced. Worn rollers make the gate ride low and bind on the track. We replace the rollers and adjust the track, usually the same visit. A typical roller replacement in Del City runs $120-$260. Call (877) 610-2993 and we’ll come take a look.
It’s usually a post problem. The latch post on a 30-year-old wood privacy gate in Del City has been moving with the clay for decades. By the time the gate pulls loose at the latch, the post has leaned far enough to misalign the whole gate. We reset the post and re-square the gate, replacing hinges and the latch only if they’re genuinely worn. Call (877) 610-2993 and we’ll tell you what’s actually wrong before quoting anything.
Yes. Custom bracket fabrication is one of the things we do most often on Del City’s older homes. The gate stays in your driveway, we measure the actual spacing, and we weld brackets to fit the gate you have. You don’t have to buy a new gate to match a bracket we’d rather sell you. Call (877) 610-2993 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Del City and Oklahoma County since 2001.