Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Midwest City
If you live in Midwest City and your gate is sagging, dragging, or the welds finally let go, here’s the short answer: our Gate Installation - Midwest City team handles most gate part replacements and on-site welding jobs in the 73110 area, which run between $180 and $650, and we can usually have Hal or one of his crew at your driveway within a day or two. We’ve been fixing gates since 2001, and we repair what other companies want to replace. Call (877) 610-2993 and a live person answers, any hour.
Midwest City isn’t like newer subdivisions on the edge of Oklahoma City. The gates here are older, the soil fights the posts, and the original hardware from the 1950s and 60s has been through decades of Oklahoma ice, wind, and summer heat. We know exactly what fails on a ranch home off SE 15th or a rental property near Air Depot Blvd, because we’ve worked on hundreds of them. The Gate Parts & Welding work we do here starts with understanding the ground the gate stands in, not just the parts bolted to it.
Why Gatewood Fence & Gate Is Midwest City’s Preferred Gate Parts & Welding Company
Hal Gatewood’s name is on the shop door and on every invoice. That’s not a slogan; it’s how the business has run since 2001. Local homeowners in Midwest City and the surrounding towns have called us for years because they know who shows up. Not a rotating cast. The person who answers the phone knows gates, and the person who welds the hinge back on is the same guy you’ll see at the hardware store the next week.
We carry a 90-Day Done Right Promise in writing on every job. If a hinge we replaced binds or a weld we made cracks, one call brings us back. No runaround, no “that’s normal wear.” We also answer the phone with a live person 24 hours a day, seven days a week. No voicemail, no menu tree. For Midwest City customers specifically, we bring on-site welding gear to your driveway, so your gate never leaves your property. If you’ve ever had a company haul a gate off and return it two weeks later with a bill you didn’t agree to, you’ll understand why that matters.
Our work in Midwest City includes older chain-link and tubular steel gates that were installed when these houses were first built. We’re background-checked and uniformed, and we’ve serviced LiftMaster, Ghost Controls, DoorKing, and Viking operators on homes throughout the 73110 ZIP. When a Tinker AFB family moves out and the property manager calls about a dragging gate a tenant lived with for a year, we’re the crew that shows up and fixes it right.
Our Gate Parts & Welding Services in Midwest City
Hinge Replacement
Hinge replacement is one of the most common calls we get from Midwest City homeowners. On the older tubular steel gates throughout the 73110 area, the original hinges were often welded on decades ago. Oklahoma’s humidity and heat cycles have rusted them thin. When a gate starts dragging on the latch side, the hinge is usually the first thing to check. We cut the old hinge off, weld a new one on in place, and set the gate back to level. A typical hinge replacement in Midwest City runs $180 to $340 depending on gate size and how much of the old weld needs grinding out.
Post Replacement
This is where Midwest City’s soil really shows up in our work. The clay under these ranch homes expands when wet and shrinks when dry, and over 50 or 60 years it heaves posts out of alignment. A gate that won’t close in July but closes fine in January is almost always a post problem, not a gate problem. We dig out the old post, set a new one below the frost line with proper concrete, and re-mount the gate. Post replacement in Midwest City typically runs $350 to $650 for a standard single-post job, more if the operator bracket needs re-welding while we’re in there.
Rail Repair
On chain-link gates and older tubular steel frames, the rail is the horizontal piece that holds the fabric or panels. When the rail rusts through or the weld at the corner fails, the gate sags in the middle and the latch won’t align. We replace rails and re-weld the corners on site. Our crew recently replaced the hinge posts on a tubular steel swing gate at a 1950s ranch off SE 15th. The posts had heaved over decades in the clay, so we set new footings below the frost line and re-welded the operator bracket to keep a LiftMaster opener from binding. That kind of job usually costs $280 to $480 in Midwest City.
Custom Welding
Not every gate problem is a broken part. Sometimes the gate is fine and the opener bracket is in the wrong place. Sometimes a homeowner has a specific need: a wider opening for a work trailer, a metal patch where a panel rusted through, a latch mount that needs to be relocated. We do custom welding on site. If your gate can be repaired by welding instead of replacing the whole thing, we’ll tell you. Custom welding jobs in Midwest City run $90 to $200 per weld point depending on access and the thickness of the steel, and we’ll give you a written quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Midwest City
We service Viking, Ghost Controls, DoorKing, and Elite operators, plus LiftMaster, FAAC, BFT, Linear, and Mighty Mule. That matters because Midwest City gates aren’t all the same. A Ghost Controls opener mounted on a 1960s tubular steel gate needs different brackets than a brand-new DoorKing install. We keep common parts and brackets on hand for Midwest City jobs, and we know which brands hold up better on the heavy gates common in the 73110 area. For Gate Access Control in Midwest City, if you’ve got an opener that’s been making a grinding noise, we can usually tell you over the phone whether it’s worth fixing before we even come out.
Common Gate Parts & Welding Problems We See in Midwest City Homes
The homes in Midwest City were built in a short burst after World War II for Tinker Air Force Base workers. That means thousands of nearly identical ranch houses went up in a few years, and their original gate hardware is all failing around the same time. Add Oklahoma County’s shrink-swell clay soil, and a few failure modes show up over and over:
- Posts heaving in the clay. Midwest City’s clay soil expands when it’s wet and contracts when it’s dry. Over 50 or 60 years, that seasonal cycle slowly pushes gate posts up and out of plumb, which is why so many 73110 gates drag on the latch side no matter how many times they’re adjusted.
- Cracked welds from old ice storms. The 2007 and 2009 ice storms that hit the OKC metro dumped enough ice on gate frames to snap hinges and crack welds on thousands of Midwest City gates. Many of those repairs were never done, or done poorly, so the cracks are still waiting to fail.
- Frozen hinges from deferred maintenance. Tinker AFB drives a steady rotation of military renters through Midwest City’s older housing. When a tenant moves out, property managers on SE 15th, Air Depot Blvd, and surrounding streets often discover broken welds and frozen hinges that went unnoticed for years. We get a lot of calls right at turnover time.
- Rusted rail corners on chain-link gates. The original galvanized chain-link gates on Midwest City’s older homes are corroded from decades of Oklahoma humidity. The corner where the rail meets the post is usually the first spot to rust through.
Pricing for Gate Parts & Welding in Midwest City, OK
Every job gets a written quote before we start, and the price we quote is the price you pay. Here’s what typical gate parts and welding work runs in Midwest City:
| Job Type | Typical Range (Midwest City) |
|---|---|
| Hinge replacement | $180 - $340 |
| Rail repair (chain-link or tubular) | $280 - $480 |
| Post replacement (single post, standard) | $350 - $650 |
| Custom welding (per weld point) | $90 - $200 |
| Operator bracket re-weld | $150 - $300 |
What affects cost most is the size of the gate, how deep the post is set, and whether the operator bracket needs to be repositioned while we’re already out there. We offer free estimates, and we don’t charge a trip fee for any job inside the county. There’s also $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and Hal will give you a straight number.
One thing worth saying plainly: Midwest City’s clay soil means we sometimes have to dig deeper and use more concrete than we would on sandier ground a county away. That’s not an upsell. It’s what keeps the post from heaving again in three years. We’ll tell you exactly what the ground needs before we dig.
We Also Serve Cities Near Midwest City
If you’re in Midwest City proper or just outside it, we cover the whole area, including Del City, Oklahoma City, Choctaw, and Moore. The soil conditions shift a little as you move north toward Oklahoma City, but the same clay-related post problems show up all over this part of the county. We’re familiar with the gates in every one of these towns.
Serving Midwest City, OK - Our Local Coverage Area
We’re based in the Midwest City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Midwest City
Because straightening the gate doesn’t fix the real problem. In Midwest City’s shrink-swell clay soil, the post itself is heaving with every wet-dry season, and the only permanent fix is to pull the post, dig a deeper footing, and set it below the frost line with proper concrete and gravel drainage. We do that all the time in the 73110 area, and it usually runs $350 to $650 per post. Call (877) 610-2993 and we’ll come take a look before you spend another afternoon fighting with a gate that won’t stay aligned.
Yes, we can usually do it on site. The original tubular steel gates on Midwest City’s older ranch homes are thicker steel than a lot of the thin powder-coated gates sold today, and they take a weld well. We’ll grind the old bracket off, position the new one for your specific opener, and weld it in place. A re-weld job like that typically runs $150 to $300 in Midwest City, and you’ll have a written quote before we start.
It’s common, but it’s not normal wear you should just live with. When the clay under your post dries out in the Oklahoma summer, the soil contracts and the post can shift. The gate then binds at the hinge and drags on the latch side. The fix is to re-set the post with a deeper footing, not to keep tightening the same hinge. In the 73110 area this is one of our most frequent calls between June and September.
Yes, and it’s a standard job for us. Chain-link gates from the 1950s and 60s are all over Midwest City, and their original posts are usually rusted at the base or heaved out of line. We pull the old post, set a new galvanized one in concrete below frost depth, and re-hang the gate with new hinges if needed. Post replacement for a standard chain-link gate in Midwest City runs $350 to $550 depending on how much old concrete has to come out.
Look at where the sag is. If the gate frame is straight but the whole gate leans, you likely have a post problem. If the gate is square at the hinges but droops in the middle, the rail is probably rusted through or the corner weld failed. Rail repair in Midwest City typically costs $280 to $480, and a sag correction from a bad post is $350 to $650. Either way, we’ll tell you straight what the gate actually needs before we touch it. Call (877) 610-2993 for a free estimate.
Call Gatewood Fence & Gate for Gate Parts & Welding in Midwest City
If your gate is dragging, binding, or the welds have cracked, call (877) 610-2993. Hal or one of his crew will answer, ask a few questions about the gate and the soil around it, and give you a free estimate. We fix the gate where it stands, we quote a price before we start, and every job is covered by the 90-Day Done Right Promise in writing. That’s the oldest kind of accountability there is. Our Gate Parts & Welding team serves all of Midwest City and the surrounding communities, and we’ll be there when we say we will.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Midwest City and the surrounding Oklahoma communities since 2001.