Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Choctaw
Gate parts and welding in Choctaw usually comes down to one of three jobs: a post that has heaved out of plumb in the red clay, a hinge that has finally let go after years of sag, or a legacy opener that quit and can’t get parts anymore. Hal Gatewood has been fixing all three since 2001, and the work happens in your driveway, not at some shop across the county. If your gate is racked, dragging, or locked up, call (877) 610-2993 and a live person answers. We serve the whole 73020 ZIP, from the older ranch neighborhoods to the gravel-drive acreages along the eastern edge of town.
The biggest difference in Choctaw is the soil. Expansive red clay swells with spring rains and shrinks in summer drought, and that cycle torques gate posts off-plumb in ways you just don’t see in the sandier ground west of here. Before we touch a hinge or a latch, we check the post. Fix the panel without the post and you’ll fix it twice.
Why Gatewood Fence & Gate Is Choctaw’s Preferred Gate Parts & Welding Company
We’re locally owned and owner-operated. Hal Gatewood’s name is on the shop and on every invoice, and his published address means you can drive over and look him in the eye if you ever want to. That’s the oldest accountability there is. We don’t hide behind a national brand that quotes one number on the phone and sends somebody else to collect a different number at the door.
Our Gate Parts & Welding crew pulls into Choctaw drives off NE 23rd, Harper Road, and the rural lanes north of Reno with the full rig: welder, post jacks, tube steel, hinge stock, and a good read on the clay. We know which subdivisions were built with agricultural-grade tube steel gates, which ones got cheap solar openers during the late-2010s acreage boom, and which ice storm did the damage to the one you’re looking at.
A live person answers the phone 24/7. Not a voicemail tree, not a chatbot, not a call center three states away. When a gate drops onto a car during an ice storm, you need someone who will actually answer and actually show up. Hal has been doing this for over 29 years, and he has not missed a season of Oklahoma weather yet.
Our Gate Parts & Welding Services in Choctaw
Hinge Replacement
Hinges on Choctaw gates fail because the post they’re welded or bolted to has moved. The clay shifts, the post leans, and the hinge carries load it was never designed for until the pin wallows out or the leaf snaps. We don’t just swap the hinge. We check the post, check the gate’s true swing, and replace or repair what actually caused the failure. Hinge replacement on a standard tube steel swing gate in Choctaw runs $185 to $420 depending on post condition and whether we need to cut out and weld in new hinge boxes.
Post Replacement
This is the job Choctaw needs more than almost anywhere else in Oklahoma County. Expansive red clay soil swells and shrinks, and a concrete-set post that looked fine in March can be three inches out of plumb by August. We cut out the old post, dig a deeper footing, set the new post with proper drainage gravel around it, and re-hang the gate to swing true. Post replacement with a new steel post and footing typically runs $525 to $1,100 in Choctaw, depending on gate weight and whether we’re doing the hinge work in the same visit. Almost always we are.
Rail Repair
Tube steel rails crack at the welds when a gate has been torqued or dragging for long enough. We see it on farm gates off Choctaw’s gravel drives after ice storms, and on subdivision gates that have been sagging for years while the opener fought the extra resistance. Rail repair is a welding job first, and a straightening job second. We grind out the cracked weld, true the rail, and weld it back hot enough to hold. Most rail repairs run $215 to $520.
Custom Welding
Sometimes the part you need doesn’t exist anymore, especially if the gate was built 30 years ago by the previous owner or a farm welder who is no longer around. Hal fabricates on site: hinge plates, latch catches, corner gussets, operator mounting plates. The gate stays in your driveway. You see the work as it happens, and you get the 90-Day Done Right Promise in writing before we pack up. Custom welding jobs in Choctaw generally run $85 to $150 per hour plus stock, and we’ll give you a written quote before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Choctaw
We’re certified to service nine major gate brands, and the ones we see most around Choctaw are Linear, Viking, and Ghost Controls solar operators on the acreage gates, plus DoorKing on the older swing gate installs from the 2000s. We keep common control boards, receiver cards, hinge pins, and roller stock on the truck so most Choctaw calls get handled in a single trip. If your operator needs a part we don’t carry, we can usually have it in hand within days, not weeks, because we order direct from our distributor network, not through a middleman.
Common Gate Parts & Welding Problems We See in Choctaw Homes
- Posts heaved off-plumb by red clay. Choctaw’s expansive soil swells with spring rain and shrinks in summer drought, moving concrete-set posts several inches in a single season. The gate then drags, racks, and pulls the hinges apart.
- Ice storm damage to tube steel frames and hinges. Eastern Oklahoma County gets hit hard several times a decade. Ice loads bend the top rail, snap weld joints, and seize the gear train in aging opener motors.
- Obsolete control boards on legacy operators. Gates hung before modern safety requirements often run on boards that are no longer manufactured. The motor is fine, but the brain is dead. We can often retrofit a new controller and safety photocells for less than a full replacement.
- Failed solar openers from the late-2010s acreage boom. A wave of low-cost solar-powered slide and swing openers went in during those years, and they are now aging into their first major failure cycle. Long unpaved driveways mean the gate is often the only security point, so these rarely stay broken long.
Pricing for Gate Parts & Welding in Choctaw, OK
Hinge replacement runs $185 to $420. Post replacement runs $525 to $1,100. Rail repair runs $215 to $520. Custom welding is $85 to $150 per hour plus stock. A full legacy operator retrofit with modern safety photocells typically runs $800 to $1,800, often far less than a full new gate system, and we’ll give you a written estimate before any work starts. Every quote is agreed upfront. The price Hal writes down is the price you pay, period.
We also keep the standing offers simple: $40 off any repair over $200, a free second opinion on any written estimate from another company, no trip charge inside Oklahoma County, and a permanent 10% discount for seniors and veterans. You do not have to haggle. It’s already on the table.
We Also Serve Cities Near Choctaw
Gatewood Fence & Gate works throughout eastern Oklahoma County. If you’re just outside Gate Parts & Welding in Choctaw, we also run regular calls to Harrah, Midwest City, Del City, and the east side of Oklahoma City. Dispatch and scheduling are coordinated from our Oklahoma City office, and the crew that shows up at your gate is the crew that will come back if anything is ever off.
Serving Choctaw, OK - Our Local Coverage Area
We’re based in the Choctaw area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Choctaw
The hinges are not the real problem. Your post is moving in Choctaw’s expansive red clay, which swells and shrinks through every rain and drought cycle, and the hinge keeps working loose because the post it is mounted to keeps shifting. We find the post movement first, fix the footing, then set the hinge. Tightening bolts on a moving post gets you about six weeks before it’s loose again. Call (877) 610-2993 if you’re tired of repeating the cycle.
In most cases, yes, and retrofit is usually cheaper than a full new system. If the motor and gearbox are still sound, we can install a modern universal control board, add safety photocells and edge sensors, and bring the gate up to current safety standards without tearing out the whole operator. A retrofit in Choctaw typically runs $800 to $1,800. Replacement of the entire operator typically starts near $2,200. We’ll tell you honestly which one makes sense for your gate, and the estimate is free.
If the post is cracked, rotted at the base, or moved more than an inch off plumb in the concrete, re-welding a hinge or bracket onto it just reattaches good steel to a failing footing. In Choctaw’s clay, a post that has heaved once usually heaves again unless the footing is redone deeper with drainage gravel. We’ll show you the post movement with a level before we recommend anything. If it’s still solid and straight, we’ll weld the repair and save you the money.
Both happen, and the ice storm usually exposes the one that was already failing. Ice load can seize the gear train or burn out the motor windings, but more often the freeze-thaw cycle has let moisture into the control board housing or the battery compartment and the unit fails electrically. We test the motor, the board, and the solar charge path before recommending repair or replacement. Ghost Controls parts are commonly available, and we handle that brand regularly around Choctaw.
We do, and that is about half the work we see east of town. Tube steel swing gates on horse properties are built heavy, so the failures are usually in the post footing, the weld joints, or the hinge pins rather than the gate itself. We weld on site, which means the gate stays on the property and your horses stay where they belong. Post replacement and re-welding on a large farm gate in Choctaw usually runs $600 to $1,300 depending on gate weight and access.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Choctaw and eastern Oklahoma County since 2001.