Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Chelsea
Gate hinge and post failure in Chelsea almost always comes back to one thing: tidal salt air from Chelsea Creek working on metal that was already old. We see it every week on triple-decker driveways off Broadway, Washington Avenue, and the side streets around Bellingham Hill. A post that looked fine last spring has rusted through at ground level by winter, and now the gate sags hard enough to scrape the asphalt. Gatewood Fence & Gate welds on site, in your driveway or shared right of way, so the gate stays put and the repair gets done same day in most cases. Call (877) 610-2993 and a live person answers, any hour.
Key takeaways for Chelsea homeowners and landlords:
- Salt-air corrosion from Chelsea Creek eats gate posts and hinges noticeably faster here than in Everett or Malden.
- We weld on site - the gate doesn’t leave your driveway, and we work around shared access without blocking your neighbor.
- Hinge replacement at a Chelsea triple-decker typically runs $220-$480, including the new galvanized hardware.
- Every job carries the 90-Day Done Right Promise in writing, and the price is agreed before any work starts.
Why Gatewood Fence & Gate Is Chelsea’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001, and his name is on the shop and every invoice. That matters in Chelsea, where a lot of gate work gets done on rental properties that have changed hands four or five times and nobody quite knows who last touched the gate. We show up, look at what’s actually failing, and fix that - not the whole gate, not a generic parts swap. On a Chelsea shared driveway, that means we check the hinge post before the hinges, because a gate sags in the post, not in the middle.
Chelsea customers call us because the turnaround is real. Our crews reach most of 02150 within the hour, and we answer the phone with a person, not a menu. When a triple-decker gate off Central Avenue seizes up and tenants can’t get their cars out, waiting until Monday isn’t an option. We carry repair stock for the common Chelsea failures - galvanized hinge sets, gate rollers, rack and pinion sections, latch hardware - so we’re not ordering parts while your driveway sits blocked.
We’re licensed and insured, background-checked, and we stand behind every weld with the 90-Day Done Right Promise. Not “up to” 90 days. Ninety days, in writing. If it isn’t done right, one call brings us back, no runaround.
Our Gate Parts & Welding Services in Chelsea
Hinge Replacement
Hinge pins on Chelsea’s original wrought iron gates fuse solid with salt rust, especially when the gate hasn’t been serviced through a full freeze-thaw cycle. We cut out the seized hardware, weld in fresh galvanized or stainless hinges, and often save the gate panel itself. Typical hinge replacement in Chelsea runs $220-$480 per gate, depending on how many hinges and whether the post needs building up. On a shared driveway off Bellingham Street, we replaced a rusted-through hinge post and got that gate swinging true without blocking the neighbor’s right of way for more than a couple of hours.
Post Replacement
Salt water pools at ground level during winter on properties near Chelsea Creek, and that’s where posts fail first - corroded through at the base while the upper post still looks decent. A new galvanized post with proper concrete footing in Chelsea runs $380-$750 installed, including cutting out the old post and welding the gate frame back to it. We don’t just sleeve a rotted post. We cut it out, set a new one, and weld the gate back square. Fix the panel without the post and you’ll fix it twice.
Rail Repair
Gate frames pulling away from posts is a Chelsea signature - years of salt air combined with deferred maintenance on rental triple-deckers. We weld cracked rails, re-square the gate frame, and reinforce failed joints in place. Rail repair typically runs $180-$380. If the whole frame has twisted, we’ll tell you straight whether welding is worth it or if replacement makes more sense. You’ll know the price before we strike an arc.
Custom Welding
Some Chelsea gates need a modification, not just a repair - a lock box welded onto a rusted wrought iron gate, a strike plate moved for a new latch, a rack and pinion re-welded to a sliding gate’s frame. Custom welding runs $150-$400 on most residential gates, and it’s done on site. Hal’s crew welds in the driveway, not in a shop across town, so you can watch the work and know exactly what you’re paying for.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Chelsea
If your gate has a FAAC, BFT, Linear, or Viking opener bolted to it, we can service the whole assembly - motor, arm, hinges, and the welded frame it all hangs on. Our Gate Parts & Welding team keeps common repair parts stocked for these brands so Chelsea customers aren’t waiting on a backorder. That matters on a triple-decker where the gate has to work every morning. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Common Gate Parts & Welding Problems We See in Chelsea Homes
- Hinge pins fused solid with salt rust. Chelsea’s tidal air means original wrought iron hinges seize up years before they would a few miles inland. The gate won’t move at all until the hardware is cut out.
- Gate frames pulling away from posts corroded through at ground level. Salt water pools where the post meets the concrete or gravel, especially during winter freezes off Chelsea Creek. The gate starts leaning, then scraping, then it won’t latch.
- Slide gates jamming on rusted rack and pinion or roller tracks. Narrow Chelsea driveways often use sliding gates because there’s no room to swing. When the rack rusts, tenants end up lifting the gate manually - and that’s a repair nobody should delay on a shared right of way.
- Latch and lock hardware completely non-functional after multiple tenant turnovers. Absentee-owned rental gates go years without service, and the first sign is usually a latch that won’t throw or a lock box that’s been punched out. We weld in new latch plates and strike hardware without replacing the gate.
Pricing for Gate Parts & Welding in Chelsea, MA
Here’s what Chelsea homeowners and property owners actually pay for common gate work, before any discounts:
- Hinge replacement (single or double gate): $220-$480
- Post replacement with new galvanized post and footing: $380-$750
- Rail repair and re-welding a cracked frame: $180-$380
- Custom welding (lock box, strike plate, rack re-weld): $150-$400
- Slide gate roller and rack replacement: $260-$540
The exact price is quoted and agreed in writing before any work starts - that’s a core promise, not a footnote. Chelsea jobs on shared driveways sometimes run a little higher when we need to work around neighbor access or schedule around two households’ cars, but the price is the price. $40 off any repair over $200, free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll put the numbers in front of you.
We Also Serve Cities Near Chelsea
We work throughout Chelsea and the surrounding communities - Everett, Revere, Malden, and Winthrop. Same neighborhood-scale service, same day in most cases. If you’re a few minutes past the Chelsea line, the trip charge is still zero inside the county, and a live person still answers the phone.
Serving Chelsea, MA - Our Local Coverage Area
We’re based in the Chelsea area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Chelsea
Because Chelsea sits directly on tidal salt water. Chelsea Creek and Boston Harbor put constant salt air onto metal hardware, and when winter freeze-thaw cycles trap salt water at the hinge pin, the corrosion is structural, not cosmetic. Boston and Revere get some of this, but not with the same direct, persistent exposure Chelsea’s low-lying streets get. Hinge pins that would last 15 years in Malden seize solid in half that time here. Our Chelsea hinge replacements use galvanized or stainless hardware specifically because standard zinc hinges fail too fast near the creek. Call (877) 610-2993 if your gate won’t budge - we’ll quote the repair free.
Usually, the panel isn’t the problem. A gate sags in the hinge post, not in the middle, and on Chelsea shared driveways the post is typically rusted through at ground level where salt water pools. We’ll fix the panel only if the panel is actually bent or cracked. Most of the time, the honest repair is a post replacement plus new hinge hardware, and that gets the gate swinging true without touching the panel. We’ll show you the failure before we quote it. Call (877) 610-2993 for a free estimate.
Yes. Narrow Chelsea driveways - especially on the tight lots between Broadway and Washington Avenue - often have sliding gates because a swing gate won’t fit. Rusted rack and pinion sections make the gate bind, and tenants start lifting it by hand. We replace the rollers, re-weld the rack, and re-square the gate in place, typically $260-$540 depending on what’s corroded. The gate keeps working while we work, so your driveway isn’t down all day. Call (877) 610-2993 and we’ll have someone out same day.
Yes - entrapment protection is required by code anywhere in Massachusetts, and a gate on a Chelsea shared driveway is exactly where it matters most. Photo eyes, safety edges, and the reverse mechanism have to function. A gate that closes on a neighbor’s car or a kid on a bike is a liability for the property owner, and on a rental triple-decker it’s the landlord who’s on the hook. We wedge safety checks into every automatic gate repair. If a gate closes on its own, there’s a failing sensor - show me the gate closing on its own and I’ll show you where it’s failing. Call (877) 610-2993 to get it checked.
Yes, and that’s a repair we do regularly in Chelsea - especially on older rental properties where the original wrought iron gate is otherwise solid. We cut out the rusted lock box area, weld in a new steel plate, and mount fresh locking hardware. The job runs $150-$400, is done on site, and carries the same 90-Day Done Right Promise as everything else we touch. The gate stays original, the lock actually works, and nobody has to order a whole new gate over a failed lock box. Call (877) 610-2993 for a free estimate - a live person answers.
Call Gatewood Fence & Gate for Gate Parts & Welding in Chelsea
If your gate is sagging, seized, or rusted through, call (877) 610-2993. You’ll get Hal or someone who works directly with him, not a voicemail and not a call center three states away. We’ll give you a straight price, agreed before any work starts, and every job carries the 90-Day Done Right Promise. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Chelsea since 2001.