Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Canby
When a heavy farm gate stops swinging clean or a hinge post starts leaning after a wet Willamette Valley winter, Canby homeowners and nursery operators need someone who can fix it without hauling the whole gate off to a shop. Gate part replacement and on-site welding in Canby typically runs $175 to $450 depending on whether we’re rebuilding a rusted hinge mount, resetting a heaved post, or welding a cracked rail on a 20-foot agricultural gate. We carry hinge kits, rollers, latch assemblies, and replacement posts suited to the wide, heavy gates common on Canby’s nursery and farm driveways, and we weld on site so the gate stays in your driveway. If your gate is binding, sagging, or missing modern safety hardware, call (877) 610-2993 and a live person will answer, any hour.
Why Gatewood Fence & Gate Is Canby’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and on every invoice. That’s the kind of accountability Canby folks respond to, because around here you still see the same people at the feed store and the hardware store, and you expect them to stand behind their work. Our published address and license number are easy to find. A background-checked, uniformed crew shows up in the window we promised, and every job carries the 90-Day Done Right Promise in writing, not buried in fine print. If something isn’t done right, one call brings Hal back.
We answer the phone around the clock with a live person. No voicemail, no queue. For someone on South Barlow Road with a nursery truck waiting at a locked gate before dawn, that matters. We also service the nine major gate brands most common on Canby properties: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Our Gate Parts & Welding Services in Canby
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that is where we start. Canby’s wet winters rust steel hinges fast, and once a hinge wears or the weld cracks, the whole gate drops and drags. We replace the hinge, weld the mount solid, and reinforce the post if it’s still sound. Typical hinge replacement on a Canby farm gate runs $120 to $280 per hinge, including on-site welding.
Post Replacement
Freeze-thaw cycles in Canby heave concrete footings and tilt hinge posts. We dig out the old post, pour a deeper footing sized for the gate’s weight and width, and set the post plumb. Fix the panel without the post and you’ll fix it twice. Post replacement here usually runs $350 to $750 depending on depth, gate size, and whether we’re matching existing pipe or tube steel.
Rail Repair
Rusted or cracked rails are common on older Canby agricultural gates, especially where livestock push or where drainage keeps the bottom rail wet. We cut out the bad section and weld in fresh steel, then clean and paint the repair. On gates built before modern safety requirements existed, we also check the operator, photo-eyes, and edge sensors at the same time. Rail repair typically runs $150 to $400 per repair area.
Custom Welding
Factory replacement parts for older farm gates are often discontinued or simply not built for the weight Canby gates actually carry. We fabricate and weld custom hinge mounts, reinforcement plates, latch strikes, and gate extension wings on site, matched to the original steel. Hal fixes the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping. Custom welding is quoted by the job after Hal sees the gate, and the price is agreed before any work starts.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Canby
Many Canby properties run gate operators from Viking, Ghost Controls, or DoorKing, and we’re certified to service all three along with LiftMaster, BFT, Linear, FAAC, Elite, and Mighty Mule. We keep common hinge, roller, latch, and operator parts on the truck for Canby calls, so a nursery gate off South Barlow Road isn’t down for days while a part ships. When a board is obsolete and no longer available, we’ll tell you straight and lay out the retrofit option and the replacement option with real numbers.
Common Gate Parts & Welding Problems We See in Canby Homes
- Rusted hinges and latch hardware. Persistent Willamette Valley rain from October through May keeps steel wet for months, and gate hardware on Canby farm driveways rusts faster than painted suburban gates. By spring we see a wave of squealing, bound-up hinges and latches that won’t engage.
- Heaved posts and sagging panels. Freeze-thaw cycles push concrete footings up and out of plumb, especially in the wetter soil around Canby’s low-lying nursery ground. The hinge post tilts, the gate drops, and the latch side misses by half an inch. That’s a post reset, not a hinge adjustment.
- Missing modern safety hardware. Gates installed on Canby farm properties years ago often lack the photo-eyes and edge sensors UL 325 now requires. A 30-year-old operator may still open and close fine, but without entrapment protection it’s a hazard for kids, animals, and delivery drivers.
- Worn gate rollers on slide gates. Gravel dust from long Canby driveways works its way into roller bearings and grinds them out. The gate starts jerking and binding in the track. We replace rollers and realign the track rather than selling a new gate when the old one is structurally fine.
Pricing for Gate Parts & Welding in Canby, OR
Here are straight numbers for the Canby market. Hinge replacement runs $120 to $280 per hinge. Post replacement runs $350 to $750. Rail repair runs $150 to $400 per repair area. Custom welding is job-quoted, but you will know the price before any torch lights. What changes a quote is gate width, steel weight, footing depth, and whether the operator needs safety hardware retrofitted at the same time.
We don’t charge a trip fee inside the county. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Those are standing offers, not haggling leverage. Call (877) 610-2993 and the price we quote is the price you pay before work starts.
We Also Serve Cities Near Canby
Canby sits at the south end of Clackamas County’s farm belt, and we work the surrounding roads daily. Our Gate Parts & Welding team serves Wilsonville, Oregon City, West Linn, and Tualatin too. Same live-person answer, same 90-Day Done Right Promise, same no-trip-charge policy inside the county.
Serving Canby, OR - Our Local Coverage Area
We’re based in the Canby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Canby
The paint you put on the outside doesn’t address moisture wicked into the hinge pin and barrel from Canby’s months-long wet season. You need sealed or greasable hinges rated for continuous outdoor exposure, plus zinc-rich priming before topcoat. We install corrosion-resistant hinge kits and weld through-coatings that hold up much longer than box-store hinges. Call (877) 610-2993 and we’ll look at what’s failing and tell you exactly what would last.
Usually yes, if the post is still plumb and structurally sound. We grind back the rust, weld a new hinge mount and reinforcement plate onto the existing steel, and then re-hang the gate. If the post has moved or the base is rotting, welding around that problem just buys you one more winter. Hal will tell you straight which one you have.
A gate operator without entrapment protection does not meet current UL 325 safety requirements. Even if it still runs, a legacy gate that reverses on a child, animal, or nursery worker is a real liability. We retrofit photo-eyes, edge sensors, and updated control boards onto older gates, and if the operator can’t support the retrofit, we’ll quote a replacement with honest numbers.
The wood or steel frame isn’t bending, your post is heaving in Canby’s freeze-thaw cycle. Water gets into the soil around the footing, freezes, and pushes the post up and out of plumb. When the ground dries out in summer, it settles back. The fix is a deeper concrete footing below frost depth, not a hinge adjustment or a new gate panel. We do that work here all spring.
Yes. We keep heavy hinge kits, welded latch strikes, and operator parts sized for the wide single-arm swing gates common on Canby nursery driveways. We also know those trucks roll through before sunrise, so we schedule early-morning slots and test the photo-eyes and loop detector with a truck, not just a clipboard. Call (877) 610-2993 and we’ll get your gate working before the next delivery.
One More Thing About Canby Gates
Canby’s gate parts and welding work skews toward wide, heavy agricultural swing gates on gravel driveways, where worn hinge posts and rusted hardware from persistent winter rain cause sag and misalignment that stalls pre-dawn nursery deliveries. Suburban Portland’s ornamental and slide-gate focus doesn’t describe what happens out here. We got a call from a wholesale nursery off South Barlow Road: their 20-foot steel swing gate had sagged so badly it dragged on the gravel, and the hinge post had shifted in the wet, freeze-thawed soil. Our crew replaced the post with a deeper concrete footing, welded a reinforcement plate to the hinge mount, and reinstalled the LiftMaster gate operator’s safety photocells, then tested the loop detector with a truck rolling through before sunrise. That’s the job: fix the gate where it stands, before it costs a nursery half a day of deliveries.
If your gate is dragging, binding, or missing safety hardware, call (877) 610-2993 for a free estimate. Hal will give you the price before any work starts, and the name on the invoice is the guy who stands behind it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Canby since 2001.