Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Canby
Gate installation in Canby usually runs $1,400 to $6,800 for a standard residential driveway gate, with slide gates on Hwy 99E frontage landing between $2,800 and $9,500 depending on the operator, width, and post work. Most jobs take one to three days on site, and we quote the full price before any work begins so there are no surprises at the invoice. We know Canby’s driveways, its wet clay soil, and the way a shared farm entrance off a county road has to keep working while we build. Call (877) 610-2993 and you’ll get a live person who can talk through your gate, your driveway, and your schedule.
We’re Gate Installation specialists, but around here that means something specific. Canby’s nurseries, hobby farms, and rural acreage parcels don’t want a catalog gate. They want one that opens before dawn every single day and doesn’t sag into the gravel by next spring. That’s what we build.
Why Gatewood Fence & Gate Is Canby’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is on the door and every invoice. That matters to people in Canby because when a gate installer works in a town like this, you see him again at the feed store and at the farmers market. You know where to find him. Canby homeowners and nursery operators call us because we show up when we say we will, we weld on site, and if something isn’t right, our 90-Day Done Right Promise brings us back. In writing, not as a handshake.
Crews serve Canby locally, with scheduling and support coordinated from the Portland office. So when you call, a live person answers around the clock, not a recording. You’ll talk to someone who knows the difference between a Viking slide-gate operator and a FAAC arm, and who can tell you whether your job is a half-day install or a two-day post-and-operator build before you commit to anything. Local knowledge plus local accountability. That’s the whole model.
Most of our Canby work comes from word of mouth. A nursery owner off Hwy 99E tells another nursery owner. A homeowner on a two-acre parcel near South Elm Street tells her neighbor. We hold a strong reputation in the area because the gates keep working and the invoices match the quotes. Seniors and veterans always get 10% off, and any repair over $200 gets $40 off. No trip charge inside the county either.
Our Gate Installation Services in Canby
Canby gate work splits between farm access and residential driveways, and we handle both. Here’s how each type of installation works on the ground in this area.
Driveway Gate
A driveway gate in Canby often means a wide opening for a pickup, a trailer, or a delivery truck, not a narrow single-car gap. We size the gate and the operator for the actual vehicles that use it, which on nursery properties can mean a 16-foot or 20-foot clear opening. Posts get deep concrete footings, and we set the operator to handle daily cycles without burning out.
Pedestrian Gate
Pedestrian gates on Canby acreage are usually cut into an existing fence line or built beside a driveway gate so people don’t have to open the big one every time. We match the frame material to the rest of your fence, hang it square, and grade the path so it doesn’t drag when the ground gets soft in winter. For hobby farms, we often add a self-closing latch since livestock has a way of finding whatever isn’t latched.
Sliding Gate
This is the work we do more of in Canby than almost anywhere else. When your driveway meets Hwy 99E or a narrow county road and there’s no room for a swing gate to arc, a slide gate is the only option that keeps trucks moving. We build slide gates on rack-and-pinion tracks, cut the gravel shoulder to set the post footing behind the fence line, and install pinch protection and safety photocells as standard. Slide gates also handle wonky grades better than swing gates, which matters on sloped farm entrances.
Swing Gate
Swing gates work well on Canby parcels with real setback, like rural properties where the driveway comes in off a private lane well back from the road. But the posts carry the entire gate, so we set them in concrete footings deep enough to outlast Canby’s freeze-thaw cycles. A cheap install with a shallow post is why gates around here sag by spring. We fix that from the start.
Double Gate
Double gates are the standard for wide farm equipment and delivery trucks on Canby nursery properties. Two leaves, two posts, and often two operators or a single operator with a slave arm. We pay attention to how the leaves meet in the middle and how the operator handles the weight, because a double gate that fights itself destroys operators fast. The gates we install are welded square on site, not bolted together from a kit and hoped into alignment.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Canby
We stock and service FAAC, BFT, Linear, and Viking operators, among others, so when we install a gate in Canby we don’t have to order a part from three states away to finish the job. That matters when a nursery needs its delivery gate working the same week. We’ll recommend the brand that fits your gate’s weight, width, and cycle count, not whichever one happens to be on a shelf. On farm driveways with heavy daily use, we lean toward Viking and BFT for their slide-gate arm strength and longevity. For lighter residential gates, FAAC and Linear hydraulic arms hold up well in our wet climate.
Common Gate Installation Problems We See in Canby Homes
- Post heave from wet clay and freeze-thaw. Canby soil stays saturated from October through May, and in winter it freezes and thaws repeatedly. Shallow post footings shift within one season, which is why a gate that worked fine in August drags on the gravel by March.
- Swing gates installed with no room to arc. We see this constantly on older Canby farm entrances near Hwy 99E. The leaf needs to swing somewhere, and if that somewhere is the road or a parked flatbed, it doesn’t work. Slide gates solve it.
- Undersized operators on wide double gates. A contractor-grade opener rated for a 300-pound gate can’t handle a 16-foot double gate built for farm equipment. The motor burns out, and someone is out there at 5 a.m. swinging it by hand.
- Wood frames swelling and binding. Canby’s rainy season makes wood gate frames swell, which throws off latch alignment and stresses the hinges. We account for that when we build, leaving clearance that still looks tight.
Pricing for Gate Installation in Canby, OR
Here are real numbers from jobs we’ve done in Canby. A basic single swing gate on a residential driveway with a chain-link or light steel frame typically runs $1,400 to $3,200. A slide gate with a rack-and-pinion track, operator, and safety photocells lands between $2,800 and $6,500 for a standard 12-foot to 16-foot opening. Double gates for wide farm access run $4,000 to $9,500 depending on whether you need one operator or two, and whether we’re building from scratch or working with existing posts. These are installed, working, warrantied prices, quoted and agreed before we start. The quote you get is the price you pay. Call (877) 610-2993 for a free estimate, and if you have another written estimate, bring it in for a free second opinion.
We Also Serve Cities Near Canby
We install gates for homeowners and farm operations in Wilsonville, Oregon City, West Linn, and Tualatin as well. If you’re anywhere in the Clackamas County area, call and we’ll talk through what your driveway needs. We know the difference between a Canby nursery entrance and a subdivision gate in Wilsonville, and we build accordingly.
Serving Canby, OR - Our Local Coverage Area
We’re based in the Canby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Canby
On a Canby nursery driveway with a gate cycling ten or more times a day, a properly sized slide gate operator like a Viking or BFT arm typically lasts 7 to 10 years before it needs major service. The key is matching the operator to the gate’s actual weight and width, not just installing whatever the gate kit included. Undersized operators fail in two to three years. Call (877) 610-2993 and we’ll size it correctly the first time, with the quote locked before work starts.
Usually not, and we’ll tell you that honestly. A swing gate needs clearance for the leaf to arc, and on a tight Hwy 99E frontage with a shared driveway, there’s often no room without the gate swinging into the road or blocking the second truck’s path. A slide gate solves it by traveling along the fence line instead of arcing. We’ll look at your driveway and tell you which one actually works before quoting anything.
In Canby, spring gate sag almost always traces back to the post, not the hinges. Wet clay soil and freeze-thaw cycles shift a shallow concrete footing, so the post and the gate lean together. Tightening hinges on a moving post does nothing. The fix is pulling the post, setting a deeper footing below the frost line, and re-hanging the gate with weight properly distributed. We do that work on site, and the 90-Day Done Right Promise covers it.
Yes, you do. Any automated gate, solar or hardwired, should have entrapment protection, meaning it stops or reverses if something is in the gate’s path. On a farm with kids, dogs, horses, and delivery drivers, that protection is non-negotiable. We install photocells and obstruction sensors on solar openers just like we do on wired systems. It’s not an add-on, it’s part of the job.
We build the slide gate so you can still walk the property during the install. If there’s an existing pedestrian gate, we work around it so it stays functional the whole time. If there isn’t one, we’ll set the new gate on its track and keep a clear walking path open while we finish the post work and operator wiring. For farm operations that need vehicle access during the build, we schedule the work in stages so the driveway is closed for as short a window as possible. Call (877) 610-2993 and we’ll lay out exactly how it goes.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Canby since 2001.