Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Brushy Creek
If you’re in Brushy Creek with a gate that’s sagging, dragging, or refusing to open, you’re dealing with two problems at once: the part that failed and the post or rail that put too much strain on it. We fix both. A typical hinge or post replacement in Brushy Creek runs $220-$480, and custom welding work usually lands between $150 and $600 depending on how much fabrication is involved. Hal Gatewood has been fixing gates since 2001, and our crew works in Brushy Creek every week, so call (877) 610-2993 and you’ll get a straight answer about what’s wrong and what it costs to make it right.
Why Gatewood Fence & Gate Is Brushy Creek’s Preferred Gate Parts & Welding Company
Brushy Creek isn’t like Austin proper. It’s unincorporated Williamson County, which means when your gate fails, the permitting conversation goes through the county, and if you live in one of the HOA-governed subdivisions around 78717, you may also need architectural committee sign-off before replacement parts go in. We know that because we’ve been through it dozens of times. A homeowner who orders a generic replacement picket profile off the internet and welds it onto a 2000s-era wrought-iron gate in Brushy Creek North often gets a notice from the HOA asking them to redo the work, which is why professional Gate Installation in Brushy Creek matters from the start. We flag that before we start, not after.
Hal’s name is on the shop. That’s not marketing copy. If the hinge post replacement shifts again after a wet spring, you call the same number and the same person picks up. We put our 90-Day Done Right Promise in writing on every invoice, and a live person answers (877) 610-2993 around the clock. No dispatch queue, no call center three states away.
Our Gate Parts & Welding team runs portable MIG and stick welders off the truck, which means most repairs happen right in your driveway. The gate doesn’t leave your property. That matters in Brushy Creek because many of these subdivision gates are heavy ornamental swings with custom picket spacing. Hauling one to a shop and back risks more damage than the original failure.
Our Gate Parts & Welding Services in Brushy Creek
Hinge Replacement
Hinge pins on Brushy Creek’s 1990s-era ornamental gates wear unevenly because the expansive clay under the post footings moves more than the gate itself. A $35 hinge pin that fails under load will eventually take the operator motor with it. We replace hinges with heavier-gauge stock and shim the post alignment so the gate hangs true instead of fighting the post. Most hinge replacements in Brushy Creek run $220-$380 per gate, including welding and adjustment.
Post Replacement
This is the big one in 78717. The clay soil under Brushy Creek shrinks during drought summers and heaves in wet springs, slowly pushing gate posts out of plumb. A post that’s off by just 3 degrees at the footing forces the gate to bind at the latch side and overloads the opener gears. We cut the old post below grade, auger a deeper footing, set the new post in concrete, and weld the gate back true. Post replacement in Brushy Creek typically runs $350-$800 depending on depth, gate weight, and whether the HOA requires a specific cap or profile match.
Rail Repair
Bottom rails on swing gates collect moisture and grit along Brushy Creek’s limestone driveways, and when they rust through, the pickets start to separate. We cut out the rotted section and weld in new steel that matches the original gauge and profile. If the gate is ornamental, we match the picket spacing exactly, so the repair is invisible to the HOA walkthrough and to your neighbor across the street. Rail repair runs $150-$450 on most Brushy Creek gates.
Custom Welding
Sometimes you can’t buy the part that failed, because the gate was fabricated in 1997 by a company that no longer exists, with picket scrollwork nobody stocks. We weld replacement pickets, cap rails, latch brackets, and frame extensions on site, matching the original pattern closely enough that you can’t tell the repair from the original run. Custom welding in Brushy Creek usually falls between $200 and $600, quoted before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brushy Creek
Most of the automated gates around Brushy Creek, especially in the master-planned subdivisions built between 1995 and 2010, run on Linear, Viking, Ghost Controls, or DoorKing Brushy Creek Gate Motor & Opener systems. We service all of them and stock common boards, remotes, and safety loop parts on the truck, so we’re not waiting on a shipment from Dallas when your gate won’t close. That’s the difference between a one-day repair and a one-week ordeal when you’re trying to keep kids and dogs in the yard.
Common Gate Parts & Welding Problems We See in Brushy Creek Homes
- Clay heave knocking posts out of plumb. The expansive soil under 78717 swells after rain and shrinks in August, and every cycle nudges the post footing a little further out of line. The gate starts binding, and the opener motor burns out trying to overcome the resistance.
- February 2021 freeze damage still showing up. That storm seized hydraulic and electromechanical operators all over Brushy Creek. Some failed immediately; others developed hairline cracks in valve bodies or capacitor failures that only show up when a cold snap returns. We’re still replacing those intermittently failing boards in 2026.
- HOA-mismatched replacement parts. Homeowners order a generic picket or cap online, weld it on, and then the architectural review flags it. We’ve rebuilt several gates in Brushy Creek that were “repaired” by someone who didn’t know the HOA required a specific profile. Matching fabrication costs more than the cheap part, but less than doing the job twice.
- Operator strain from misaligned swing geometry. Even small gate misalignment increases amp draw on the motor. A 16-foot ornamental swing gate in Brushy Creek that’s holding a 200-pound panel plus the wind load of an open field will eat a homeowner-grade opener every few years unless the post, hinge, and rail are dialed in.
Pricing for Gate Parts & Welding in Brushy Creek, TX
Here are real numbers for Brushy Creek work, not a vague promise to quote you later. Hinge replacement runs $220-$380. Post replacement runs $350-$800. Rail repair runs $150-$450. Custom welding runs $200-$600. Full gate rebuilds, including post, rail, hinges, and reinforcement, typically land $800-$1,400 on a 16-foot ornamental swing. The price you’re quoted is the price you pay, and we agree on it before any work starts. You also get $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate and a number you can hold us to.
We Also Serve Cities Near Brushy Creek
In addition to Brushy Creek, our gate parts and welding crew regularly works in Anderson Mill, Jollyville, Cedar Park, and Wells Branch. If your gate is on a county road or in a subdivision just across the line, call us. If you’re looking for a broader overview of what we do, start with our Gate Parts & Welding hub page.
Serving Brushy Creek, TX - Our Local Coverage Area
We’re based in the Brushy Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Brushy Creek
Usually yes, if your home is in one of the HOA-governed subdivisions that dominate 78717. The county permit is one layer, but many Brushy Creek HOAs have architectural review covenants that require approval before visible changes, including gate repairs that alter the post cap, picket profile, or finish, so Gate Access Control - Brushy Creek compliance checks are built into our process. We ask about your HOA before ordering parts, because a non-matching cap style can trigger a redo that costs more than the original repair. Call (877) 610-2993 and we’ll walk you through what your specific community requires.
Because the expansive clay under the post footing shrinks during dry summers, and the post tips slightly further each drought cycle. The gate itself isn’t stretching; the post is moving. Fixing the hinge without addressing the post footing means you’ll repeat the repair in a year or two. We’ve replaced several post footings in Brushy Creek North where the clay had shifted the post a full 2 inches out of plumb. Call us at (877) 610-2993 for a post inspection and a written quote.
Yes. Most of Brushy Creek’s ornamental gates were fabricated between 1995 and 2010 with patterns that are no longer stocked by any distributor. We match the picket profile, spacing, and cap style from on-site measurements, and weld the replacement in place. We recently re-welded a bottom rail and matched four pickets on a 16-foot swing gate in Brushy Creek North, and the HOA architectural committee signed off before the concrete around the new post cured. Call (877) 610-2993 with a photo of your gate and we’ll tell you if it’s matchable.
You’ll likely need replacement or board-level repair, and it’s not a DIY job if high-tension springs or electrical wiring are involved. The February 2021 freeze seized hydraulic and electromechanical operators across 78717, and many units that “recovered” are still failing intermittently when temperatures drop below freezing. We carry Linear, Viking, Ghost Controls, and DoorKing replacement parts and can get most Brushy Creek gates running the same day we diagnose the failure. Call (877) 610-2993 for emergency service, and don’t force a frozen gate open.
For long driveways on shifting clay, a slide gate often makes sense, because it doesn’t rely on a hanging panel that amplifies post movement. But slide gates need a straight, level track run and enough side clearance, which some Brushy Creek subdivisions don’t have. We’ll measure your driveway and give you an honest recommendation either way. A slide gate conversion on a typical 78717 lot runs $2,500-$5,000, and we’ll quote it in writing before any work starts. Call (877) 610-2993 to talk through it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brushy Creek and surrounding Williamson County communities.