Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Brookhaven
Gate parts and welding in Brookhaven, GA runs somewhere between $220 and $1,400 depending on the job, and most repairs are finished the same day once we get eyes on the gate. If your post is leaning in the red clay or a hinge weld has cracked, call (877) 610-2993 and Hal will be the one who answers. We’ve been fixing gates since 2001 and the work stays in your driveway, not hauled back to some shop across town.
Brookhaven’s gate problems don’t look like the ones in Chamblee or Doraville. The teardown-and-rebuild boom since 2012 means a lot of automated gates went in fast, on lots that don’t have room for mistakes. Add Georgia Piedmont red clay that swells in winter and shrinks in summer, and you get posts that move seasonally. We know what that does to a gate because we see it every week in Ashford Park, Drew Valley, and along Dresden Drive. Not from a seminar. From under the gate.
This page covers what we actually do around Brookhaven: hinge replacement, post replacement, rail repair, custom welding, gate rollers, and latch and lock work. If you want a number given to you straight before anyone picks up a grinder, you’re in the right place.
- Gate parts and welding repairs in Brookhaven typically run $220-$1,400.
- Hinge replacement usually starts around $250; post replacement starts around $600.
- We weld on site, at your driveway, in Brookhaven. We don’t haul gates off.
- Every job carries the 90-Day Done Right Promise in writing.
- A live person answers the phone 24/7 at (877) 610-2993.
Why Gatewood Fence & Gate Is Brookhaven’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001 and his name has been on the door since day one. In Brookhaven, that matters more than most places. Homeowners here have been burned by out-of-town outfits that quote one number over the phone and present another on the porch. We don’t operate that way. The price gets quoted before work starts, agreed to in writing, and that’s the number on the invoice.
We’re locally owned and owner-operated, with a published address and license number you can look up yourself. When you call about a sagging gate off Mabry Road or a slide gate dragging in Drew Valley, you’re talking to someone who knows the difference between a 1950s Cape Cod wrought-iron gate and a 2021 new-build automated swing gate. That split defines Brookhaven. It’s why Gate Parts & Welding work here isn’t a generic fix list.
Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround, no claim number, no voicemail tree. And yes, we answer the phone at 3 a.m. because a gate that won’t close is a real problem when you live on a busy cut-through street in the 30319 ZIP.
Our Gate Parts & Welding Services in Brookhaven
Hinge Replacement
Hinge replacement in Brookhaven is our seasonal constant. The red clay under your post swells every wet winter and contracts every hot summer. That movement pushes posts out of plumb, which bends hinges and makes the gate drag. We cut off the old hinge, weld in a heavier replacement, and reset the gate so it swings clean. For most Brookhaven homes, hinge replacement runs $250-$550 depending on gate weight and how far the post has drifted.
Post Replacement
When a hinge post has leaned more than a couple of inches, new hinges won’t save it. The post has to come out, the footing has to be redone, and the new post needs to be set deeper and anchored better than the last one. That’s the real fix for a gate that sags again every spring. In Brookhaven, post replacement for a standard swing gate runs $600-$1,200. For a heavier custom ornamental gate, budget toward the higher end.
Rail Repair
Rails crack. It happens more on ornamental iron that’s been through decades of Brookhaven’s freeze-thaw cycles. When a rail splits, the gate loses its shape and the operator starts fighting itself. We weld the rail in place, add a gusset if the design allows, and grind the repair smooth so it matches. Rail repair in Brookhaven typically runs $180-$450, including on-site welding and cleanup.
Custom Welding
Custom welding covers a lot of what we do in Brookhaven: matching a broken scroll on a 1960s iron gate, fabricating a bracket for a FAAC operator on a new-build, building a steel sleeve to reinforce a corroded post. We weld on site with a mobile unit, which means the gate never leaves your property. Custom welding jobs in Brookhaven start around $200 and go up with material and detail. If the gate is ornamental and older, we always check the surrounding metal before striking an arc, because welding thin corroded iron takes more care than people expect.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Brookhaven
We’re certified to service nine major gate brands, and in Brookhaven we see a lot of FAAC and BFT operators on the newer homes around Ashford Park and along Redding Road. Linear and Viking show up on older installations and we stock common parts for all of them. That’s the difference between fixing your gate today and waiting a week for a part to ship. If the brand plate is still legible, we can usually get it moving the same trip.
Common Gate Parts & Welding Problems We See in Brookhaven Homes
- Hinge posts leaning in the red clay. Brookhaven’s shrink-swell soil moves posts seasonally. Within two or three years, a swing gate that used to clear the driveway starts dragging. The post needs reset, not shimmed.
- Slide gates choking on red clay mud. Tight lots in Ashford Park and Drew Valley leave little clearance under slide gates. Georgia red clay and mulch pile up on the track every spring, burning out LiftMaster motors faster than anywhere else nearby.
- Frozen hinge pins after winter ice storms. Brookhaven doesn’t get repeated hard freezes. It gets quick freeze-thaw cycles that push moisture into hinge pins and crack powder-coat finishes on ornamental iron.
- Premature weld failure on new-construction gates. A lot of gates installed during Brookhaven’s teardown boom went in on footings that weren’t spec’d for the soil. We see hinge welds fatiguing within years, not decades.
Pricing for Gate Parts & Welding in Brookhaven, GA
Hinge replacement in Brookhaven runs $250-$550. Post replacement runs $600-$1,200. Rail repair runs $180-$450. Custom welding starts around $200 and goes up with material and detail. Rollers run $120-$300 installed, and latch and lock work runs $90-$250. These are the numbers we quote over the phone and they’re the numbers on the invoice. If a job needs something unusual, we tell you before we start, not after.
We charge no trip charge inside the county. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and you’ll get the price before anyone lifts a tool.
We Also Serve Cities Near Brookhaven
Based just outside the city line, we work throughout Gate Parts & Welding in Brookhaven and the surrounding area daily. That includes North Atlanta, Chamblee, Doraville, and North Druid Hills. If you’re in one of those towns and your gate needs attention, call (877) 610-2993 and ask for Hal.
Serving Brookhaven, GA - Our Local Coverage Area
We’re based in the Brookhaven area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Brookhaven
Sagging is almost never a lubrication problem. In Brookhaven, the hinge post itself shifts in the shrink-swell red clay, so no amount of grease will fix it. The fix is resetting the post and welding in appropriate hinge hardware. Call (877) 610-2993 for a free estimate.
Yes, we match the existing design as closely as the current material allows. We replace the hinge but preserve as much original ironwork as possible. It matters on Brookhaven’s older Cape Cods and ranches where that gate is part of the house’s character.
In most Ashford Park yards, the permanent fix is a combination of installing a welded track cover and adjusting the gate clearance. We can add a barrier that keeps the worst of the red clay and mulch off the rollers. Call (877) 610-2993 to have us look at the specific layout.
Every two to three years. Brookhaven’s red clay moves more than most soil in the region, and post footings installed by general contractors during a teardown build often need attention sooner. We check the plumb of the post and the condition of the weld at the base.
Yes, if the surrounding rail still has structural thickness. We test the metal before we weld. If the rail is too far gone, we’ll tell you and talk through the options. Call (877) 610-2993 for a direct quote. Estimates are free.
The One Thing About Brookhaven Gates Nobody Tells You
Brookhaven has a gate problem that didn’t exist twenty years ago. The city’s post-2012 teardown-and-rebuild surge packed the 30319 ZIP with automated driveway gates on new-construction luxury homes, many installed by general contractors rather than gate specialists. Those gates went in on lots with narrow setbacks and no room for error, often on post footings that weren’t designed for Georgia Piedmont red clay. The clay swells in wet winters and cracks in summer drought, moving posts two or three inches out of plumb within a few years. New hinges don’t fix a moving post. That’s why hinge replacement and post footing work in Brookhaven is a seasonal constant in a way it isn’t in neighboring Chamblee or Doraville.
The older homes tell a different story. Brookhaven still has original 1950s-1970s ranch and Cape Cod houses with ornamental wrought-iron entry gates and manual latches. Those gates have been through decades of freeze-thaw cycles, and the hinge pins on them seize faster than anything built after 2010. The iron is thinner from years of surface corrosion, and the hardware was often undersized for the gate’s actual weight. Matching an original hinge casting from 1965 takes patience and a welder. In the same week, we might reset an automated FAAC gate off Redding Road and weld a broken scroll on a 1962 Cape Cod off Ashford Road. Same town, two completely different jobs.
In Ashford Park recently, we reset a custom ornamental swing gate whose hinge post had leaned out of plumb after two wet winters in the red clay. The post shift pulled the FAAC operator out of alignment and tripped the safety photocell every other cycle. Our crew excavated the post footing, corrected the sag with a welded steel sleeve, and re-hung the gate so the rack and pinion meshed cleanly. Silent operation restored without replacing the panel. The homeowner had been told by someone else that the gate needed to be replaced. It didn’t. It needed a post footing that wasn’t floating in shrink-swell clay and a welder who understood gate geometry.
On the tightest lots in Drew Valley, where new homes sit close to the lot line and driveway depth is minimal, slide gates were often installed with clearances too tight for what Brookhaven’s soil does. Red clay mud and landscape mulch accumulate on the track every spring. Rollers choke. LiftMaster motors overheat and fail. We see this every March and April. The real fix is often adding a welded track cover and adjusting the gate’s clearance, not just swapping out another motor. Neighboring Chamblee and Doraville have their own gate issues, but this particular failure pattern is distinctly Brookhaven: new construction on tight lots in a city that redeveloped fast.
We Answer the Phone in Brookhaven
If your gate is sagging, dragging, or locked shut, call (877) 610-2993. A live person answers, not a machine. You’ll get a straight answer about what’s likely wrong, what it costs to fix, and when we can be there. No trip charge inside the county. Free estimate on every job. And the price you agree to before we start is the price you pay when we’re done. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Brookhaven with on-site welding and gate repair since 2001.