Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Boyle Heights
Gate parts and welding in Boyle Heights usually comes down to one thing: old wrought iron that was built before modern galvanizing and has spent decades soaking in Eastside smog. A typical hinge replacement runs $180-$340, and post re-setting with new concrete usually lands between $350 and $650 depending on how far the footing has crumbled. Hal Gatewood has been fixing these exact gates since 2001, and he still does the welding himself. If your gate is dragging on the apron or the post is tilting toward the street, call (877) 610-2993 and talk to a person who knows Boyle Heights driveways.
Why Gatewood Fence & Gate Is Boyle Heights’s Preferred Gate Parts & Welding Company
Most of the gates we work on in Boyle Heights are 80 to 110 years old. That’s not a marketing line; it’s what the housing stock is. Craftsman bungalows and Spanish Colonial Revival homes built between 1910 and 1950 nearly all have street-facing wrought iron, and most of it has been painted over so many times the rust underneath has had decades to do its work. We know what that means before we ever touch a hinge: the post is probably compromised, the welds at the rail-to-stile joints are likely failing from the inside out, and somebody before us probably tightened a hinge against a post that was already shifting. That’s why our Gate Parts & Welding team starts every job by checking the post, not the panel.
Hal’s name is on the shop and on every invoice. His phone number is published, and a live person answers it 24 hours a day. When you call about a sagging gate off Lorena Street or a seized latch near the 5 Freeway, you’re talking to someone who’s going to be the one welding it. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. No runaround, no asking to speak to a different department.
Our Gate Parts & Welding Services in Boyle Heights
Post Replacement
This is the job we do most often in Boyle Heights, and it’s the one that gets missed by just about everybody. The original gate posts on 1920s and 1930s homes here were set directly into concrete sidewalk aprons or stucco pilasters. Over 80-plus years, water seeps into the seam where steel meets concrete, the steel rusts through at the base, and the post starts leaning. A gate that sags in the post doesn’t get fixed by adjusting hinges. We cut the old post out, pour a new footing, and set a galvanized or stainless replacement. Post replacement in Boyle Heights typically runs $350-$650 depending on footing condition and gate weight.
Hinge Replacement
Old Boyle Heights gates almost never have modern bearing hinges. They have barrel hinges or strap hinges that were forged when the house was built, and after decades of smog and deferred maintenance, they seize or wear egg-shaped. We replace them with stainless or galvanized hinges sized to the gate’s actual weight, and we weld them on site so the gate stays in your driveway. Hinge replacement runs about $180-$340 per hinge set, and we quote the full number before any work begins.
Rail Repair
On the pre-1950 wrought iron we see across Boyle Heights, the bottom rail is usually the first thing to go. Water collects on it, paint hides the rust, and eventually the welds at the rail-to-stile joints crack before you can see visible surface rust. We cut out the rotted section, weld in new matching stock, and coat it so the repair doesn’t just become the next rust spot. Rail repair typically runs $220-$480 depending on length and how many joints need re-welding.
Custom Welding
You can’t buy an off-the-shelf panel for an 8-foot driveway gate from 1932. Those openings are non-standard by today’s measurements, and anything you order won’t match the original ironwork anyway. We fabricate panels, pickets, top rails, and hinge brackets to match what’s already there, then weld them on site. Custom welding in Boyle Heights starts around $150 for small brackets and runs up from there for full panel re-fabrication. Every quote is written and agreed before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boyle Heights
We’re certified to service nine major gate brands, and for Boyle Heights we keep a range of parts in the truck for DoorKing, Elite, and Viking operators. A lot of the gates here got automation added in the 1980s and 1990s, and those old operator arms are now fighting against gates that have sagged since installation. We fix the gate structure first, then service the operator so it’s not pushing against a bind. If your opener is burning through gears or tripping its safety edge, the problem is usually in the gate, not the motor.
Common Gate Parts & Welding Problems We See in Boyle Heights Homes
- Hinge posts rusted through at the base. The post enters the concrete apron and that seam is where water sits. The rust is invisible under layers of paint until the gate drops far enough to bind on the driveway.
- Welds failing at rail-to-stile joints before surface rust shows. Boyle Heights sits just inland from the coast, and the LA Basin’s smog and particulate pollution settle on bare or poorly coated metal. Oxidation starts on the inside of the joint where two pieces of iron meet, and you won’t see it until the weld cracks.
- Non-standard 8-to-10 foot gate openings. These were sized for 1920s and 1930s cars, not modern SUVs. Homeowners patch with mismatched parts because nothing off the shelf fits, and the patch accelerates wear on hinges, posts, and the operator.
- Seized latches and locks on painted-over gates. Paint gets into the latch body, dries, and freezes the mechanism. Then someone forces the gate, and the force bends the gate leaf or the hinge strap instead of opening the latch.
Pricing for Gate Parts & Welding in Boyle Heights, CA
If you want real numbers for Boyle Heights, here they are. Hinge replacement runs $180-$340. Post replacement with new concrete runs $350-$650. Rail repair runs $220-$480. Custom welding starts around $150 and goes up based on fabrication time and stock. What moves the price is the condition of the footing and whether the original iron is thick enough to weld to, and we’ll tell you that before we quote it. There’s no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. The quote you get is the price you pay, agreed before we start. Call (877) 610-2993 and we’ll walk the job with you.
We Also Serve Cities Near Boyle Heights
We work throughout the Eastside and the neighboring communities. If you’re in East Los Angeles, Maywood, Commerce, or Cudahy, you’re still in our local service area and the same rates apply. Most of our Boyle Heights customers send their family in those neighborhoods our way, and we answer the same phone number every time.
Serving Boyle Heights, CA - Our Local Coverage Area
We’re based in the Boyle Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Boyle Heights
The post is rusting through at the base, where it enters the 1920s-to-1940s concrete apron. Tightening hinges against a shifting post just pulls the gate out of alignment faster. The fix is post replacement: cut the old steel out, pour a new footing, and set a galvanized post. That typically runs $350-$650 in Boyle Heights. Call (877) 610-2993 and we’ll look at the footing before you spend money on more hinge adjustments.
Yes. We cut out the rotted section of the bottom rail, weld in new stock that matches the original profile, and coat the repair so it doesn’t become the next rust spot. The original pickets and top rail stay untouched. Rail repair like this runs about $220-$480 depending on length, and we quote it before we start welding.
Yes. An 8-foot opening from the 1930s won’t accept any stock panel built today, and a mismatched replacement will wear out the hinges and the operator within a few years. We fabricate a panel to match the original width, height, and iron profile, then weld it to your existing frame. Custom fabrication starts around $150 and goes up based on size and detail.
Look at the post first. If the post is plumb and the gate leaf has dropped relative to the post, the hinge is worn or bent. If the post itself leans toward the street or the driveway, the footing has failed and the hinge was never the real problem. In Boyle Heights, failed footings are more common than bent hinges because of the original concrete work. We’ll diagnose it for free before quoting anything.
Yes, we recommend stainless hinges and stainless fixings for any gate near the 5 Freeway or the other major corridors through Boyle Heights. The particulate pollution settles on metal and accelerates oxidation, and stainless is the only thing that holds up long-term in that environment. Stainless hinge sets run about $180-$340 installed. Call (877) 610-2993 for an exact quote; estimates are free.
If your gate is sagging, dragging, or the latch hasn’t opened without a fight since you moved in, call (877) 610-2993. Hal will answer or call you back himself. The name is on the shop, the shop is down the road, and the welding is done in your driveway. That’s the whole deal.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Boyle Heights since 2001.