Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Boyle Heights, CA
Gate repair in Boyle Heights typically runs $120 to $800 depending on whether we’re re-hanging a sagging swing gate, replacing seized hardware, or re-setting a post that’s shifted in a crumbled 1920s footing. Most repairs here are done same-day because the crew carries welding gear and common parts on the truck. If your gate won’t close or drags across the driveway, call (877) 610-2993 and a live person picks up, day or night.
Why Boyle Heights Homes Are Different
Boyle Heights sits in the LA Basin where smog and particulate pollution concentrate. That’s not a metaphor; it’s chemistry. Airborne particulates settle on bare or cheaply painted wrought iron and accelerate oxidation. Combined with the neighborhood’s near-rainless climate, rust-preventive coatings are almost never reapplied until the corrosion is already structural. We routinely find gates where the bottom rail looks intact from the street but is paper-thin behind the paint. That’s a Boyle Heights pattern, and it changes how we quote: we price for what we might find behind the paint, not just what we can see on the surface.
The housing stock here tells the same story. Most homes were built between 1910 and 1950, craftsman bungalows and Spanish Colonial Revival places, many with gate posts set directly into the original sidewalk aprons or stucco pilasters. Those posts crack and tilt over decades. A gate that looks like it needs only a hinge adjustment often needs the post dug out and re-set. And because so many driveways are 8 to 10 feet wide, sized for 1920s and 1930s cars, off-the-shelf panels don’t fit. We weld on site to match the opening you actually have.
Gate Repair in Boyle Heights
Gate repair in Boyle Heights usually comes down to the post, not the panel. The homes here were built between 1910 and 1950, and the original gate posts went straight into sidewalk concrete that has since cracked and tilted. We see the same patterns every week: a wrought-iron pedestrian gate that won’t latch near Mariachi Plaza, a driveway gate that scrapes on Mott Street because the post settled in pre-war concrete. We fix the gate in your driveway, welding on site, and we quote the real cost before we start. For a full look at how we approach repairs, see our Gate Repair page.
Electric Gate Repair
Electric gate repair in Boyle Heights often comes down to the operator: the motor that swings or slides the gate. We service Viking, Ghost Controls, and DoorKing units, plus other major brands, and we carry common parts so we’re not waiting a week for a capacitor. A gate that opens in fits and stops halfway may need a limit switch, a board, or a capacitor, and we diagnose it on the spot. Electric gate repair starts around $150 for a capacitor or limit switch and runs $250 to $600 when a board or motor is involved. The smog and particulate that sit in the LA Basin get into motor housings here, so we check the board contacts and wiring connections before we quote the fix.
Automatic Gate Repair
Automatic gates in Boyle Heights fail in predictable ways: the safety edges get brittle, the photo eyes get bumped out of alignment, and the chain or belt stretches. We also see damage from drivers who misjudge the narrow driveway widths this neighborhood is full of. A car clips the gate, the panel twists, the track bends, and the opener burns itself out trying to move a gate it was never meant to move. We fix the gate first, then the opener. A typical automatic gate repair runs $180 to $380 when the issue is alignment or a limit switch, and more when the board or motor has failed. Show me a gate closing on its own and I’ll show you where it’s failing.
Hinge & Post Repair
Here is where Boyle Heights gets specific. Many older homes here have gate posts set directly into the original 1920s to 1940s concrete sidewalk aprons or stucco pilasters that have since cracked and tilted. A gate that looks like it only needs a hinge adjustment often turns out to need the post re-set in a crumbled footing. We quote for that upfront, because we know this neighborhood, and we would rather tell you the real cost before we start than surprise you after. Post re-setting in a broken footing is the biggest variable: $350 to $800, because we’re digging out old concrete, setting the post, and re-hanging the gate properly. Fix the panel without the post and you’ll fix it twice.
Gate Realignment
A gate that scrapes the driveway or no longer meets the latch is almost always a realignment job. In Boyle Heights, the cause is often decades of deferred maintenance: hinge posts that shifted, hinges that wore into ovals, and panels that were welded once in the 1980s and never touched again. We cut out the old weld, re-hang the gate, and realign it so it swings clean and latches like it should. Gate realignment usually falls between $180 and $380, depending on the post condition. If the panel itself is past saving, we quote a replacement and we mention that we weld on site, so the gate never leaves your driveway.
How fast can you get to Boyle Heights?
We serve Boyle Heights daily and can usually schedule same-day or next-day service. Call (877) 610-2993 and a live person will give you a real window, not a four-hour estimate. If your gate is stuck open or won’t close, tell us that when you call and we’ll prioritize it.
Do you cover all of Boyle Heights, including 90023?
Yes, we cover the entire 90023 zip code and every Boyle Heights neighborhood, from Mariachi Plaza up to Breed Street and from Soto Street to the river. No trip charge inside the county, and the price we quote is the price you pay, agreed before any work starts. Call (877) 610-2993 for a free estimate.
Gate Installation in Boyle Heights
Gate installation in Boyle Heights starts with a hard look at the footing, not just the panel. In this neighborhood, we see 1920s and 1930s gate posts set straight into cracked sidewalk concrete every single week. That’s why we check the post before we hang anything on it. If you need a gate that actually swings true on a 9-foot pre-war driveway, the post comes first. For more on how we approach new gates, visit our Gate Installation page.
Driveway Gate Installation
Boyle Heights driveways are narrow. We’re talking 8 to 10 feet, sized for cars from the 1920s through the 1940s, not modern SUVs. Most off-the-shelf driveway panels don’t fit. We custom-fabricate the width you actually have, on-site, so the gate doesn’t bind or sag inside a year. A custom-fabricated driveway gate on a pre-war lot averages $2,800 to $6,500, depending on width and whether we’re automating it. On a job near Evergreen Cemetery, we pulled a sagging 1930s wrought-iron swing gate off a cracked stucco pilaster where the hinge post had rotted through at the base, re-set the footing, and replaced the seized original latch before hanging the new panel.
Swing Gate Installation
Swing gates are the default in Boyle Heights, especially the wrought-iron pedestrian gates fronting so many craftsman bungalows and Spanish Colonial Revival homes. The problem here is rarely the hinge itself. It’s the post. Original 1920s and 1930s posts were set directly into concrete aprons and stucco pilasters that have since cracked and tilted. We re-set the post first, then hang the gate. Post re-setting, which this neighborhood requires more often than most, adds $400 to $1,200 per post. Fix the panel without the post and you’ll fix it twice.
Pedestrian Gate Installation
A pedestrian gate in Boyle Heights takes a beating from smog, sprinkler overspray, and decades of deferred maintenance. We install wrought-iron and steel pedestrian gates built for this neighborhood’s specific conditions, with stainless fixings and galvanized hardware where it matters. A typical wrought-iron pedestrian gate installation runs between $900 and $2,400. And if your old gate has been painted over six times to hide rust, we’ll tell you honestly whether it’s worth restoring or needs replacement. Hal would rather weld what’s salvageable than sell you something you don’t need.
Why do so many Boyle Heights driveway gates need post re-setting instead of just hinge replacement?
Because the original posts were set directly into 1920s and 1930s sidewalk concrete, which cracks and tilts over decades. The hinge looks like the problem, but the post underneath has shifted or rotted through. We re-set the post in new footing first. Replace the hinge on a bad post and you’ll be back in the same spot in six months. Call (877) 610-2993 for a free measure.
Can I install a slide gate on my narrow 9-foot Boyle Heights driveway?
Yes, but it requires custom fabrication. Standard slide gate kits assume a wider opening, so a 9-foot driveway means we build the panel to your exact width and set the track to match. Installers who force-fit a standard panel here end up with a gate that binds and burns out the operator within a year. Call us for a free measure and a written price before you buy a kit.
Gate Motor & Opener in Boyle Heights
Gate motor and opener repair in Boyle Heights usually runs $150 to $450 for a motor rebuild or control board replacement, and most jobs are finished the same day. If your gate won’t budge, groans on the track, or trips the breaker every afternoon, that’s the kind of work we know well. Call (877) 610-2993 and a live person will ask what the gate is doing and tell you what to expect. For a deeper look at operator work, see our Gate Motor & Opener page.
Motor Installation
New motor installs in Boyle Heights almost always involve fitting a modern operator to a gate that was never designed for one. The 8-to-10-foot wrought-iron swing gates on the 1920s bungalows off Indiana Street weren’t hung with automatic openers in mind. We build the custom brackets, set the post properly, and mount the operator so it isn’t fighting the hinge line. A typical motor installation here runs $800 to $1,600, depending on post condition and whether we’re adding battery backup or a photocell pair.
Motor Repair
We rebuild more motors in Boyle Heights than we replace. Capacitors, limit switches, drive gears, control boards: these are replaceable parts. A seized gear won’t cost you a new motor. Hal would rather show you the exact part that failed than hand you a quote for a whole new system. Most motor repairs in this neighborhood run $150 to $450. If the post has shifted and cooked the motor, we’ll tell you that too, because fixing the motor without fixing the post means you pay twice.
Slide Motor Repair
Slide gates are the practical answer for Boyle Heights’s narrow driveways and tight curb cuts. When a slide motor fails, it’s usually the chain, the gear rack, or the board, not the motor itself. We fit new operators to existing rack-and-pinion setups all the time, and we re-weld the rack when years of impact have knocked it loose. Slide motor repair here runs $175 to $500. Full operator replacement with new safety edges starts around $1,100 and runs up to $2,300 depending on the gate length and post condition.
My wrought-iron gate sags and the motor struggles to open it. Can you just adjust the operator?
No. In Boyle Heights, especially on the 1920s to 1940s homes, a sagging gate almost always means the hinge post has shifted or the hinge welds are failing. Adjusting the operator to force the gate through the sag is how motors get burned out. We reset the post, rebuild the footing if it’s crumbled, and re-weld the hinges. Then the motor runs normally again. A gate sags in the hinge post, not in the middle, and that is where we start.
Can you add a battery backup to my existing gate operator on a gate that was installed 30 years ago?
Yes, in most cases. Battery backup can be wired into nearly any existing operator with a functioning control board. The exception is the really old boards from the 1980s that predate current safety standards; on those, we recommend replacing the board at the same time. In Boyle Heights, where alley-loaded garages and street-facing driveway gates are common, battery backup keeps your gate working when the power dips. A battery backup addition runs $350 to $800. Call (877) 610-2993 for a written quote.
Gate Access Control in Boyle Heights
A keypad entry system in Boyle Heights typically runs $450 to $950 installed, while a full video intercom with phone app access lands in the $1,400 to $2,600 range depending on whether you’re retrofitting a 1940s gate or starting fresh. The work is usually done same week, not same month. If your gate came with the house and the wiring looks original, expect some rewiring to be part of the quote, not a surprise add-on. For more on access control, see our Gate Access Control page.
Keypad Entry
A keypad mounted on an existing Boyle Heights pedestrian gate runs $450 to $950 installed, including wiring and a weather-sealed housing. We see plenty of old keypads on rentals around Evergreen Cemetery and Hazard Park that have been there since the 2000s, yellowed and barely readable. We’ll remove the dead one, check the existing wire, and mount the new pad where it’s actually reachable from the driver’s side without backing into traffic on Cesar Chavez.
Remote Control
Adding a remote-control receiver to a swing gate opener that currently only works from the house runs $180 to $380 in Boyle Heights. Many older lots here have gates that were automated years ago with a simple toggle, and the receiver either fails or the remotes get lost when tenants move out. We program new remotes, replace receivers, and set the range properly for narrow driveways where the gate is just feet from the house. We service Linear, Viking, and Ghost Controls systems among others.
Phone Entry
Phone-entry systems, where the gate calls your cell when a visitor presses the button, start around $600 and go up based on whether we’re tying into a landline, VoIP, or a cellular gateway. This is a good fit for the multi-unit courtyard apartments in Boyle Heights where there’s no intercom wiring to the individual units and pulling new cable through 1940s stucco would cost more than the gate itself. We keep the programming simple: one button, it rings your phone, you press 9 to open. That’s it.
Card Reader
For Boyle Heights properties with multiple tenants or frequent family members coming and going, a card reader system starts around $550 per gate with a small stack of programmed cards. These are common on the private courtyards and shared driveways off streets like Soto and Lorena where multiple households share a single gate. We set up the reader, issue the cards, and show the property owner how to add and delete cards without calling us back. DoorKing and Linear gear are what we install most often here.
How much does it cost to add a keypad to an existing gate in Boyle Heights?
A keypad entry system installed on an existing Boyle Heights gate runs $450 to $950 depending on the wiring condition and whether the gate post needs attention. You’ll get that price in writing before work starts, and it won’t change when we get there. Call (877) 610-2993 for a free estimate.
Does your 90-Day Done Right Promise apply to access control work in Boyle Heights?
Yes, every access control install and repair we do in Boyle Heights carries the 90-Day Done Right Promise in writing. If something isn’t right in the first 90 days, one call brings Hal back, no runaround, no debate. That’s true whether it’s a keypad on a bungalow off Indiana or a card reader on a shared courtyard gate near Cal State LA.
Gate Parts & Welding in Boyle Heights
When a wrought-iron gate on a 1920s craftsman in Boyle Heights starts dragging, the problem is rarely just the gate itself. It’s usually a hinge post that shifted in an old concrete sidewalk apron, or a panel that’s been painted over so many times the rust underneath finally won. We fix those gates on site, in your driveway, and we’ve been doing it long enough to know what Boyle Heights gates actually need. For more on parts and welding, see our Gate Parts & Welding page.
Hinge Replacement
Hinges on Boyle Heights gates take a beating from daily use and decades of smog-driven corrosion. A hinge that’s seized or broken is a safety issue, because the gate’s whole weight ends up hanging on whatever’s left. We cut off the old hardware, weld on new hinges rated for the gate’s actual weight, and get the swing right before we leave. Most hinge replacements in Boyle Heights run $150 to $400 depending on gate size and how much of the post needs rebuilding around the hinge point.
Post Replacement
This is the big one in Boyle Heights. Many of these homes have gate posts set straight into the original 1920s to 1940s concrete sidewalk aprons, and after eighty or ninety years those footings crack and tilt. A gate that looks like it just needs a hinge adjustment often needs the post dug out, re-set in new concrete, and plumbed before anything else happens. If you fix the panel without fixing the post, you’ll fix it twice. Post replacement in Boyle Heights typically runs $400 to $900 depending on footing condition and gate weight.
Rail Repair
The horizontal rails on older Boyle Heights gates are often thin-walled steel that’s rusted from the inside out. When a rail snaps, the gate twists and the latch stops lining up. We’ll straighten what’s salvageable, weld in new rail sections where it isn’t, and match the existing profile so the repair doesn’t stand out like a patch. Rail repair work usually lands between $200 and $550 in this neighborhood.
Custom Welding
Because so many Boyle Heights driveways are non-standard widths from the 1920s to 1940s, off-the-shelf gate panels rarely fit right. That’s where custom welding earns its keep. We fabricate matching panels, extend or narrow existing frames, and rebuild decorative scrollwork that’s been rusted through. Custom welding is billed by time and material, and a typical Boyle Heights job runs $300 to $800. We quote the price before any work starts, and you’ll see the written number before we touch a welder.
Why do so many Boyle Heights gate posts need replacing rather than just a hinge adjustment?
Many of these homes have gate posts set directly into the original 1920s to 1940s concrete sidewalk aprons or stucco pilasters, and after decades that concrete cracks and tilts. A gate that appears to need only a hinge adjustment often needs the post re-set in a new footing, which is why we always check the plumb of the post before quoting a hinge repair. Fix the panel without the post and you’ll fix it twice. Call (877) 610-2993 for a written estimate.
What’s your warranty on gate parts and welding work in Boyle Heights?
Every job carries the 90-Day Done Right Promise in writing. That means if the weld fails, the post shifts, or the hinge you paid us to replace starts binding within 90 days, we come back and make it right at no charge. One call, no arbitration, no fine print. If your gate is sagging, seized, or cracked at the weld, call (877) 610-2993.
Brands We Service in Boyle Heights
We service Viking, Ghost Controls, DoorKing, and Elite operators, along with Linear, FAAC, BFT, LiftMaster, and Mighty Mule gear. Common boards, capacitors, and safety edges are stocked locally so most Boyle Heights repairs don’t wait on a distributor. See our brands for the full list of what we carry and service.
Pricing for Gate Repair in Boyle Heights, CA
| Service | Typical range in Boyle Heights |
|---|---|
| Hinge and latch repair | $120 - $250 |
| Gate realignment | $180 - $380 |
| Electric gate repair (capacitor or limit switch) | $150 - $250 |
| Electric gate repair (board or motor) | $250 - $600 |
| Post re-setting in broken footing | $350 - $800 |
| Wrought-iron pedestrian gate installation | $900 - $2,400 |
| Custom driveway gate installation | $2,800 - $6,500 |
| Motor installation (new operator, existing gate) | $800 - $1,600 |
| Motor repair (board, capacitor, limit switch, gear) | $150 - $450 |
| Slide motor repair | $175 - $500 |
| Keypad entry system installed | $450 - $950 |
| Video intercom with phone app access | $1,400 - $2,600 |
What pushes price up in Boyle Heights is post condition. Crumbled 1920s footings, tilted stucco pilasters, and rust hidden under four coats of paint all add labor you don’t see until we open it up. That’s why we quote the full price in writing before any work starts, and the number we quote is the number you pay. No surprises at the door. We also take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount.
Neighborhoods We Serve in Boyle Heights
We run calls all over the 90023 zip code. Typical response time for a repair in Boyle Heights is same-day when you call before early afternoon, and we’re out on emergency calls around the clock.
- Mariachi Plaza and Boyle Avenue
- Soto Street corridor
- Cesar Chavez Avenue corridor
- Evergreen Cemetery district
- Breed Street and St. Louis Street
Service Area - Cities Near Boyle Heights
We serve Boyle Heights, CA and the surrounding neighborhoods across central and East LA. Our service area also includes East Los Angeles, CA, Maywood, CA, Commerce, CA, Cudahy, CA, and Huntington Park, CA. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve Boyle Heights locally.
Serving Boyle Heights, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Boyle Heights and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Boyle Heights coverage area; if your address is on it, we can help.
Also serving nearby: Boyle Heights, CA, East Los Angeles, CA, Maywood, CA, Commerce, CA, Cudahy, CA, Huntington Park, CA.
FAQs About Gate Repair in Boyle Heights
We serve Boyle Heights daily and can usually schedule same-day service when you call before early afternoon. Emergency calls, like a gate stuck open or a post that has let go, are handled around the clock. Call (877) 610-2993 and a live person will give you a real arrival window, not a four-hour range.
Most gate repairs and like-for-like replacements don’t need a permit, but new installations with concrete footings can trigger a check depending on the scope and the property line. We know the local requirements in Boyle Heights and will tell you if your job needs anything filed. Call (877) 610-2993 and we’ll walk you through what your specific project involves.
Our pricing is the same across the service area. The difference in Boyle Heights is the work profile: jobs here skew toward structural rehabilitation of aging wrought iron rather than new operator installs, so a typical repair bill reflects more welding time and post work. We quote the full price in writing before any work starts, and that number doesn’t change at the door. Call (877) 610-2993 for a free estimate.
Call (877) 610-2993 for a free estimate on gate repair, installation, or access control in Boyle Heights. A live person answers, day or night. The price is quoted and agreed before any work starts, and the name on the invoice is the same name on the shop.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Boyle Heights Customers Say
"Operator had died and the manufacturer no longer makes the board. Rather than sell me a whole new system he found a compatible unit and adapted the mount. Saved me a great deal of money."
- Salvador Arredondo"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly