Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bloomington
Gate parts and welding in Bloomington usually mean one of two things: a gate that will not open, or a gate that sags so badly it scrapes the driveway every time you force it. We fix both, and we fix them at your house. Gatewood Fence & Gate has been doing on-site welding and gate hardware repair in Bloomington for years, and we are the crew residents call when a Fontana or Rialto company has already quoted a full replacement for a gate that only needed a hinge post and an afternoon of honest work. If your gate is down, call (877) 610-2993. A live person answers, and we will tell you straight whether it is a repair or a replacement.
Why Gatewood Fence & Gate Is Bloomington’s Preferred Gate Parts & Welding Company
Hal Gatewood started this shop in 2001, and his name is still on the invoice. That matters in an unincorporated community like Bloomington, where you are more likely to see the same faces at Jurupa Avenue hardware counters than to trust a faceless number from a search ad. We are not passing through. Our crew handles Gate Installation - Bloomington along Santa Ana Avenue, rehung sagging driveway gates off Cedar Avenue, and replaced seized rollers on slide gates serving horse properties near the Bloomington dairy flats. We know the difference between a gate that needs grease and a gate that needs a post.
Bloomington homeowners keep calling us for two reasons. First, we do not swap parts that do not need swapping. Hal fixes the gate in your driveway rather than hauling it back to a shop or telling you the whole system needs to go. Second, the 90-Day Done Right Promise is on paper with every job. If it is not done right, one call brings us back. No runaround. No fine print. We also pick up the phone around the clock with a live person, because a gate stuck open at midnight on a lot with horses or tools is not something that can wait until Monday.
Our Gate Parts & Welding Services in Bloomington
This page is about Gate Parts & Welding, and we focus on the jobs Bloomington homes actually need: hinge replacement, post replacement, rail repair, and custom welding. No upselling. No gate that gets condemned because a weld failed, when the weld just needed to be done right.
Hinge Replacement
Hinges fail before gates do. In Bloomington, dry Santa Ana wind-blown grit gets into hinge barrels and grinds them from the inside, so a hinge that looks intact from the outside is actually wallowed out and walking the gate off its plumb. We replace worn hinges with stainless hardware and weld them to the post so the gate stops dragging at the latch side. A gate sags in the hinge post, not in the middle, and that is where we start.
Post Replacement
Bloomington sits on caliche-hardened soil, and when wind loads hammer a gate, the post is the piece that cracks or shifts. Not the panel. We have pulled old posts where the underground section snapped clean through, leaving the gate floating and the concrete collar cracked. On a job off Jurupa Avenue, we cut out a shifted hinge post, poured a deeper Sonotube footing with stainless J-bolts, rehung the gate with stainless hinges, and then checked that the operator’s safety photocell still read entrapment-compliant. That gate is still closing square.
Rail Repair
Wrought-iron and tubular steel gates from Bloomington’s post-WWII ranch homes often have cracked or rusted rails, especially where a horizontal rail meets a picket. We weld those cracks closed and add gussets where the design needs it, so the repair holds rather than hairline-cracking again next summer. If a rail has been patched twice already, we will tell you, and we will build it back stronger than the original.
Custom Welding
Some gates are not worth replacing because nothing on the market matches the original. We do on-site custom welding for Bloomington properties, from re-welding a tractor-gate hinge plate to fabricating a new steel sub-frame for a wooden gate that has rotted at the corners. The gate stays in your driveway. You watch the work happen. If you do not like the weld, you say so while we are still there.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bloomington
Our gate parts and welding work pairs with Bloomington Gate Motor & Opener systems already in the ground. We are certified to service nine major brands, including FAAC, BFT, and Linear, along with LiftMaster, Viking, DoorKing, Ghost Controls, Elite, and Mighty Mule. We keep common parts on the truck for Bloomington jobs, especially hinge sets, roller brackets, latch hardware, and operator wiring harnesses, so a repair does not become a two-trip job because we had to order a $14 part from a distributor.
Common Gate Parts & Welding Problems We See in Bloomington Homes
- Grit-seized rollers and rack teeth on slide gates. Santa Ana winds push dry grit into roller bearings and rack-and-pinion teeth, causing abrasive wear and jamming. You will not see the rust scaling common on the coast; you will see shiny, polished wear surfaces and a gate that jerks instead of gliding.
- UV-brittle operator wiring and cracked powder coat. Summer temperatures over 105°F bake gate operator harnesses until the insulation cracks, and powder-coat finishes fail years earlier than they would in a coastal market. That is why Bloomington gates often look older than they are.
- Hinge posts cracking under Santa Ana wind load. Caliche soil does not give, so the post takes the full lateral force. The panel looks straight, but the gate sags at the latch because the post footing has cracked below grade. A hinge swap will not fix it; the post has to be reset.
- Original ranch-home gates patched repeatedly instead of welded properly. Many Bloomington homes still have their 1950s-1970s original iron gates, and those gates carry old brazed repairs, household bolts, and washers stacked as spacers. We cut out the old patches and weld the gate back to a proper frame.
Pricing for Gate Parts & Welding in Bloomington, CA
Bloomington pricing for gate parts and welding runs a little differently than in the incorporated cities around it. A hinge replacement on a standard single swing gate typically runs $180 to $340, including labor and stainless hardware. A full hinge post replacement with a new Sonotube footing lands between $450 and $850 depending on gate weight and how much of the old concrete has to be chipped out. Rail repair and custom welding usually fall in the $150 to $600 range for typical tubular steel gates, with larger slide-gate frames running higher. Every price is quoted and agreed before any work starts, so the number we give you on the phone or at the gate is the number on the invoice. We do not do surprise add-ons. If a second opinion on a written estimate would help, we offer that free. Call (877) 610-2993 for an exact quote, and ask about the $40 off any repair over $200 and the 10% senior and veteran discount.
We Also Serve Cities Near Bloomington
Our gate parts and welding crew works all over Bloomington and the surrounding communities. We regularly weld and rehang gates in Gate Parts & Welding in Bloomington, Fontana, Rialto, Glen Avon, and Pedley. If you are just outside the Bloomington boundary, call us, and we will tell you whether the trip is covered under our no-trip-charge county policy.
Serving Bloomington, CA - Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bloomington
No, a hinge post replacement on an existing manual swing gate does not require a County permit. What does require County review is any new automated gate opener installation, and that is where Bloomington homeowners get burned. Bloomington is unincorporated San Bernardino County, so gate projects fall under County DPW rules, not Fontana or Rialto municipal rules. A contractor who pulls a Fontana permit for an automated gate in Bloomington has pulled the wrong jurisdiction’s permit, and the gate is technically unpermitted. We check the jurisdiction and handle Gate Access Control in Bloomington properly before we touch an automated gate, so you never end up explaining a lapsed permit to a County inspector. Call (877) 610-2993 before you schedule automated gate work, and we will tell you what the County actually requires.
Because Bloomington is dry and windy, so the failure mode is dry oxidation and grit abrasion rather than rust scaling. Fine Santa Ana wind-blown grit works its way into the hinge barrel and embeds in the pin, grinding the bearing surface until the hinge binds and the gate stops swinging cleanly. The hinge often looks dry and shiny rather than brown and scaled, which is why homeowners think it just needs oil. By the time it binds, the pin is usually galled and the leaf is wallowed out, so the right repair is a stainless hinge replacement, not a can of WD-40. If you have a Bloomington gate that will not swing, call (877) 610-2993 and we will diagnose it over the phone.
The failure is almost always in the hinge post, not the panel. In Bloomington’s caliche-hardened soil, Santa Ana wind loads crack the concrete collar around the post or snap the post below grade, and the gate sags at the latch side while the panel remains visually straight. Show me a gate that sags with a straight panel and I will show you a post that is moving. We reset the post in a deeper footing with stainless J-bolts, then rehang the gate with new stainless hinges. A hinge swap alone on a shifted post will fix nothing. Call (877) 610-2993 for a free estimate on post replacement in Bloomington.
In Bloomington, no. A solar opener on a slide gate is still a new automated gate system under San Bernardino County DPW rules, and it requires the same permitting, entrapment protection, and safety compliance as a wired opener. The panel being solar does not change the jurisdiction or the code. Beyond the permit, long-driveway slide gates in Bloomington’s large-lot and horse-property areas often need heavier track and rack hardware than the kit included with a solar opener, because the wind loads on a 16-foot gate are brutal. Running an undersized solar kit on a long slide gate here means an opener that stalls and gear teeth that wear out in a year. We see it regularly. Call (877) 610-2993 and we will tell you what the gate actually needs before you buy anything.
For Bloomington, we specify galvanized or stainless hardware and a properly prepped, high-solids powder coat on any welded repair. The combination of abrasive Santa Ana grit, summer UV, and dry oxidation means standard black-oxide hardware and cheap coatings fail in a few years. We use stainless hinge pins, stainless latch hardware, and galvanized J-bolts for post replacement. For steel rail and frame repairs, we weld the underlying steel properly, then prime and coat it so the repair does not flash-rust inside a single dry summer. The goal is not to match the old gate; it is to outlast it. Call (877) 610-2993 and we will spec the gate parts that hold up in Bloomington’s specific climate.
Get Your Bloomington Gate Fixed Right the First Time
If your gate is sagging, seized, or sheared off at the post, do not patch it again. Call Gatewood Fence & Gate at (877) 610-2993. We will give you a straight answer, a written price before any work starts, and a 90-Day Done Right Promise on the work. Hal’s name is on the shop, the shop is down the road, and the phone gets answered by a person who will know your street when you call back.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bloomington since 2001.