Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bloomington
If you need a new gate in Bloomington, you want the job done right the first time, with a price quoted before we touch anything. Gatewood Fence & Gate has been doing exactly that since 2001. We install driveway gates, sliding gates, swing gates, double gates, and pedestrian gates across Bloomington and the unincorporated parts of San Bernardino County, and we’re familiar with the permitting rules that apply here specifically. Call (877) 610-2993 and you’ll reach a live person who can schedule a free estimate, not a call center.
Why Gatewood Fence & Gate Is Bloomington’s Preferred Gate Installation Company
Bloomington isn’t like Fontana or Rialto. It’s unincorporated San Bernardino County, and that changes how gate installations get permitted and inspected. A contractor who does most of his work in Fontana might pull the wrong jurisdiction’s paperwork, or skip it entirely, and leave you with an automated gate that County DPW never signed off on. We don’t do that. We pull the permit ourselves, handle the inspection, and make sure your gate is legal, safe, and installed to current entrapment-protection standards.
Hal Gatewood’s name is on the shop and on every invoice. That’s the kind of accountability that matters when you’re spending thousands on a gate that has to last through Santa Ana winds and 105-degree summers. The same crew that measures your gate is the crew that welds it, sets the posts, and wires the operator. We don’t swap in faceless subcontractors. We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we stock common parts locally so we’re not waiting on a truck from another state.
Every job carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings us back. That’s it. No runaround, no fine print.
Our Gate Installation Services in Bloomington
Driveway Gate Installation
A new driveway gate in Bloomington usually means one of two things: a long ranch-style driveway off a quiet county road, or a tighter front-yard entry on a 50-year-old property. We install both. For the long-driveway setups common west of Cedar Avenue and around the Santa Ana River bottom, we pay close attention to track length, cantilever options, and how the wind loads the frame. For older ranch homes near Jurupa Avenue, a double swing gate often makes more sense than a sliding gate, especially when you want to keep the look of the original ironwork.
Pedestrian Gate Installation
Pedestrian gates in Bloomington get overlooked more than they should. They’re usually the first thing to sag when the hinge post loosens in caliche soil, and the first thing a kid or delivery driver uses every day. We set pedestrian gates with deeper post embedment than standard, because the soil here holds a post differently than coastal ground. Then we hang the gate so it swings true, not just true for the first six months.
Sliding Gate Installation
Sliding gates are common in Bloomington because of the long driveways and larger lots. The good news is a properly built sliding gate handles Santa Ana wind better than a big swing gate. The bad news is a poorly set track or undersized rollers will fail fast in the grit that blows through the San Bernardino Valley. We size tracks and rollers for the actual conditions here, and we’ll tell you straight if a cantilever system saves you maintenance money over the next decade on a long-track property.
Swing Gate Installation
Older Bloomington homes often still have their original wrought-iron or tubular steel swing gates, and many of them have been patched for years instead of replaced. We can rebuild what’s worth rebuilding and replace what isn’t. The hinge post is usually the weak point, especially on a gate that’s been taking wind load for 40 or 50 years. We set a new post with deeper embedment, weld the hinges on straight, and hang the gate so it won’t sag in a season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bloomington
We work on gate operators from FAAC, BFT, Linear, and Viking, among others. For Bloomington homeowners, that means we can usually repair or rebuild an existing operator rather than telling you to rip it out and start over. We keep common control boards, safety edges, and photocells on hand for these brands, and what we don’t stock locally, we can get quickly. If you’ve got an older Linear or Viking operator that’s still mostly functional, we’ll tell you honestly whether a repair makes sense or whether you’re better off putting that money toward a new LiftMaster with current entrapment protection.
Common Gate Installation Problems We See in Bloomington Homes
- Post footing failure from Santa Ana wind. Older swing gates set in caliche-hardened soil often have shallow footings that wind has been working loose for decades. The post starts to lean, the gate sags, and the hinges bind. Setting a deeper footing stops the cycle.
- Unpermitted automated gate systems. We see this regularly: a Bloomington homeowner hired a Fontana or Rialto contractor, the work was done, and the County of San Bernardino permit was never pulled or was pulled for the wrong city. That leaves the gate technically unpermitted, which can bite you when you sell the property or when the operator needs a safety inspection.
- Dry-oxidation seizure of hinges and rollers. Bloomington’s heat, wind-blown grit, and low humidity corrode gate hardware differently than coastal salt air. Hinges and rollers seize up with a hard, dry oxidation that tells you the gate hasn’t been lubricated in years. Some of it can be freed and serviced; some of it is too far gone.
- Original 1960s gates that were never meant for a modern operator. These gates are heavy, often slightly out of square, and hung on posts that are too small for the load. You can retrofit some of them with a modern operator. Others need a new frame, new hinges, or both before an operator will work safely.
Pricing for Gate Installation in Bloomington, CA
Here’s what you can expect to pay in Bloomington. A basic single swing driveway gate, installed with new steel posts and hinges, runs $1,800 to $3,400. A double swing gate typically lands between $3,200 and $6,500 depending on width, material, and whether we’re adding an operator. A sliding gate for a long driveway runs $3,500 to $7,800, more if you need a cantilever system or a long track run. A pedestrian gate install is $800 to $1,800. Adding a new LiftMaster, FAAC, or Viking operator runs $1,200 to $2,600 with safety photocells and entrapment protection, depending on the brand and whether we’re running new conduit. Every price is quoted and agreed before any work starts. Call (877) 610-2993 for a free estimate. We also offer $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% discount for seniors and veterans.
We Also Serve Cities Near Bloomington
Gatewood Fence & Gate serves Bloomington and the surrounding communities. If you’re in Fontana, Rialto, Glen Avon, or Pedley, we cover those areas too. We schedule from our Inland Empire office and serve Bloomington locally, so you’re not waiting on a crew from another county. See our Gate Installation page for the full scope of what we do, or call (877) 610-2993 to talk about your project near Bloomington.
Serving Bloomington, CA - Our Local Coverage Area
We’re based in the Bloomington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Bloomington
Yes. Bloomington is unincorporated, so automated gate openers fall under County of San Bernardino DPW permitting and inspection rules, not a city building department. We pull the permit for you and handle the inspection so the system is compliant from day one. Call (877) 610-2993 and we’ll walk you through what the County requires for your specific property.
Sometimes it can be retrofitted, but not always. If the hinges are sound, the frame is square, and the posts aren’t leaning, we can often weld on an operator bracket and install a LiftMaster or FAAC kit. If the gate has been patched for decades and the hinges are dry-oxidized to the point of failure, replacement is usually the smarter money. We’ll show you the gate and explain the choice before you commit. Call (877) 610-2993 for an on-site assessment.
The San Bernardino Valley sends hot, dry, gritty wind across Bloomington for long stretches, and summer temperatures over 105°F bake lubricant out of hinges and rollers. The result is a hard dry oxidation that locks up hardware. Coastal cities get rust scaling from salt moisture; Bloomington gets dry seizure. Regular lubrication helps, but so does using sealed roller bearings on new installations. We recommend the latter for most Bloomington gates.
If your lot is large and your sliding gate runs 20 feet or more, a cantilever system often saves years of track maintenance. It eliminates the ground track entirely, so wind-blown grit and small debris stop affecting the rollers. It’s a bigger upfront investment, but on a long run in Bloomington, it usually pays for itself in avoided repairs. Call (877) 610-2993 and we’ll measure your run and give you a straight answer.
Current County rules require entrapment protection on automated gates, which means safety photocells across the gate opening, and depending on the setup, a reversing edge or other secondary device. If we install the operator, we install the required protection and make sure it’s adjusted correctly. If you have an older operator without protection, we’ll explain your options on-site. Estimates are free, and the price is agreed before work starts.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bloomington since 2001.