Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Azle
Gate parts and welding in Azle usually comes down to one question: is the post still worth saving, or has the clay finally won? Most of the time, we can weld the hinge barrel back to the post, fabricate a latch catch that matches the existing rail, or drive a heavy sleeve over the rusted section and have the gate swinging clean by early afternoon. Hal Gatewood has been doing this kind of work since 2001, and the shop carries enough raw steel, hinge barrels, and gate hardware to handle Azle’s mix of 1970s ranch gates, newer suburban operators, and the occasional wide farm gate out along the Tarrant and Parker County line. If your gate is grinding metal or dragging on one corner, call (877) 610-2993. We’ll tell you straight whether it’s a weld job or a post job before anyone gets in a truck.
Why Gatewood Fence & Gate Is Azle’s Preferred Gate Parts & Welding Company
We work in Azle every week, so the person who shows up knows the difference between a sagging hinge on a 1990s ranch gate in 76020 and a heaving post on a lakefront lot near Eagle Mountain Lake. That local knowledge changes the fix. Hal’s name is on the shop and on every invoice, and if he sends a crew member out, that person is background-checked, uniformed, and trained on Gate Installation in Azle using the same brands we service across the city: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
Azle homeowners keep telling us the same story: a national outfit quoted one price on the phone and a bigger one at the door. We don’t work that way. The price gets quoted and agreed before any work starts, and it stays that price. Every job carries our 90-Day Done Right Promise in writing. If something isn’t right, one call brings Hal back. No runaround. And when you call the shop, a live person picks up, 24 hours a day. Not a voicemail, not a queue. That matters when your gate won’t close at 10 pm and your horses are watching the gap.
Our Gate Parts & Welding Services in Azle
Our full Gate Parts & Welding team handles everything from a broken hinge barrel to a complete post replacement and custom bracket fabrication. In Azle, the work tends to cluster around a few stubborn problems: clay heave pulling posts out of square, lake humidity eating hinge pins, and old agricultural gates being asked to work as residential driveway gates. Here’s how we handle each.
Hinge Replacement in Azle
A gate that drags and grinds usually hasn’t failed in the middle. It’s failing at the hinge post, where the weight of the panel torques the barrel and the pin wears into an oval. On Azle’s older ranch-style homes, we regularly find original weld-on hinges that predate the first Azle Gate Motor & Opener. We cut them off, weld new heavy-barrel hinges to the post and the gate frame, and re-hang the panel so it clears the driveway by at least three inches. If the post itself is moving, that’s addressed before the hinge ever touches it.
Post Replacement in Azle
North Texas clay is the main culprit here. In Azle’s 76020 and 76098 ZIP codes, summer drought shrinks the soil and winter rain heaves it back. A post that doesn’t move in August can be two inches out of plumb by February, and that throws the gate’s travel limits into chaos. We over-excavate and drive tube-steel pier footings instead of pouring a standard concrete pad. It’s more work up front, but it holds. Along the Eagle Mountain Lake shoreline and the creek bottoms feeding into it, the soil is sandy or silty fill that never really stabilizes. Standard concrete spalls. We’ve fixed enough of those footings to know the tube-steel pier is the only thing that survives.
Rail Repair in Azle
Gate rails take a beating: sag frames, rust-through at the weld points, and impact damage from a tractor or a teenager’s first solo drive. We straighten what’s salvageable and cut out and replace what isn’t. On tube-steel agricultural gates now being used as driveway gates, the rails often weren’t designed for the weight of an add-on opener bracket. We weld reinforcing gussets and sag-correction braces so the panel doesn’t flex under automated operation.
Custom Welding in Azle
Some gates can’t be fixed with off-the-shelf parts. Azle’s housing is a patchwork: 1970s and 1980s ranch homes, newer 2000s and 2020s tract developments, and working acreage. When an old farm gate needs to carry a modern operator, the standard latch kit usually doesn’t fit the post gauge. We fabricate latch catches, operator brackets, and reinforced hinge plates on site, in your driveway, so the gate never leaves the property. That’s the difference between a repair and a replacement bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Azle
We service and stock parts for the brands Azle homeowners actually have on their gates. That includes Viking operators on wide farm gates, Ghost Controls kits on long rural driveways where the nearest outlet is a hundred feet away, and DoorKing and Elite systems with Gate Access Control - Azle on gated estates along the Eagle Mountain Lake corridor. If you have a different brand, call us. We’re certified to service nine major gate brands, and we can usually tell from the symptoms what’s failing before we even see the unit.
Common Gate Parts & Welding Problems We See in Azle Homes
These are the failures we see most often across Azle, and they’re shaped by local soil, moisture, and the area’s older housing stock:
- Clay heave throwing posts out of plumb. Azle’s expansive clay moves with every wet and dry cycle. Hinges bind, racks skip, and the gate’s limits drift until it won’t close or won’t open fully.
- Lakefront hinge corrosion. Homes near Eagle Mountain Lake deal with year-round humidity and salt-tinged air that rusts hinge pins and seizes keypad entry housings faster than inland Azle properties. Hinges fail right at the barrel.
- Old agricultural gates doing residential duty. A 16-foot tube-steel gate built for livestock clearance is now the driveway gate. Post gauges don’t match, latch hardware doesn’t line up, and standard parts kits don’t fit. Custom fabrication is the fix.
- Spalling concrete footings in low-lying areas. Along Azle’s creek bottoms, the footings stay wet. Concrete cracks and flakes, and the post slowly leans. We see it most in the low lots between Eagle Mountain Lake and the FM 730 corridor.
Pricing for Gate Parts & Welding in Azle, TX
Azle gate repairs generally run on a predictable spread. A hinge replacement with welding typically runs $180 to $360 depending on whether it’s a single weld-on barrel or a pair of heavy-barrel hinges. Post replacement, including over-excavation and a driven tube-steel pier footing, runs $400 to $900 depending on depth, soil conditions, and whether the old footing has to be broken out. Rail repair and custom welding brackets run $150 to $450 depending on the extent of the fabrication. Solar gate opener kits with installation run $700 to $1,600 for long driveways without power at the gate, depending on the brand and panel wattage. Every quote is written and agreed before work starts. Call (877) 610-2993 for an exact price and a free estimate.
We Also Serve Cities Near Azle
Besides Azle, we cover Gate Parts & Welding in Azle and the surrounding communities: Eagle Mountain, Briar, River Oaks, and Saginaw. If you’re on a rural lot east of Eagle Mountain Lake or in a subdivision off Boat Club Road, call us. Same honest pricing, same 90-Day Done Right Promise.
Serving Azle, TX - Our Local Coverage Area
We’re based in the Azle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Azle
Azle’s expansive clay soil shrinks in summer drought and heaves in wet winters. As the ground dries, the post shifts and the gate binds against the hinges or the rack. After rain, the soil swells and temporarily re-levels the post, which is why it seems to fix itself. The permanent fix is over-excavating and driving a tube-steel pier footing so the post stops moving with the soil. Call (877) 610-2993 to schedule a look at your post.
Yes. This is common across Azle’s working acreage and rural-to-suburban parcels, especially in 76098. The original gate was sized for livestock, not passenger vehicles, and the post gauge and latch hardware usually don’t match any standard parts kit. We fabricate custom hinge barrels, operator brackets, and a sag-correction brace, then install a heavy-duty operator rated for the panel weight and travel span. The gate stays in your driveway while we weld. Call (877) 610-2993 for a free measure-up.
Homes along the Eagle Mountain Lake shoreline and the creek bottoms feeding into it deal with constant ground moisture and humidity. Hinge pins rust faster than inland Azle, seize at the barrel, and eventually cause the gate to grind and bind. We replace the hinges with heavier, corrosion-resistant barrels and re-hang the panel. If the post is rusting too, that’s addressed at the same visit. Call (877) 610-2993 to have your hinges checked.
Yes. Many Azle properties, especially those on multi-acre lots or along FM 1886 and the lake corridor, have no power at the gate. We install solar gate opener kits from brands like Ghost Controls and Viking, with panels sized for the operator’s draw and the local sun exposure. If heavy tree cover is an issue, we’ll tell you before quoting. Estimates are free. Call (877) 610-2993 to discuss your driveway.
Yes. We cut out the bad post, over-excavate the footprint, and drive a tube-steel pier footing that won’t crack like standard concrete. This is the same fix we use on the low-lying parcels between the lake and the creek bottoms, where standard concrete footings spall within a few years. The post comes out, the new pier goes in, and the gate is re-hung with the hinges re-aligned to the corrected plumb. Call (877) 610-2993 for a free estimate on a post replacement.
Get Your Azle Gate Fixed Today
If your gate is grinding, leaning, or won’t hold its limit, call (877) 610-2993. We’ll quote an upfront price, agree on the work, and have someone out to Azle to do the job right. Hal Gatewood’s name is on the shop, and the 90-Day Done Right Promise is on every invoice in writing. A live person answers around the clock. If it’s hanging, we can fix it.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Azle since 2001.