Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Arcadia
When an ornate iron gate in Arcadia starts sagging or a weld cracks, you need someone who understands what’s holding it up. We do. Gatewood Fence & Gate handles gate parts and welding on the heavy, custom-fabricated gates that are everywhere in this city, from the foothills estates near Highland Oaks Drive to the 1950s ranch homes south of Huntington Drive. If you’re in 91006, 91007, 91066, or 91077 and your gate needs hinge work, post resetting, or on-site welding, call (877) 610-2993 and you’ll get a live person, not a recording.
Why Gatewood Fence & Gate Is Arcadia’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001, and his name is on the shop and every invoice. That matters in Arcadia, where a lot of the gate work we do involves imported iron gates that don’t match U.S. hardware specs. We’re not a franchise crew rolling through town. The person who answers the phone is the person who knows the difference between a Gatewood weld and the factory weld that failed on your upper hinge.
Our Gate Parts & Welding team works in Arcadia weekly. We know the streets, we know the wind patterns off the San Gabriels, and we know which properties have the overseas-fabricated gates with metric post dimensions. Reviews from Arcadia homeowners keep pointing to the same two things: we show up when we say we will, and we fix the part that’s actually broken instead of quoting a whole new gate.
Every job comes with our 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No runaround, no fine print.
Our Gate Parts & Welding Services in Arcadia
Hinge Replacement
Heavy iron gates in Arcadia live or die by their hinges. On the newer luxury builds north of Foothill Boulevard, we routinely see hinge barrels that were welded overseas with non-standard spacing. When one fails, you can’t just pull a hinge off the shelf at a parts house and expect it to line up. We cut out the old hinge, weld in a replacement matched to the existing geometry, and reinforce the mount so the next Santa Ana wind event doesn’t tear it loose. A typical hinge replacement on a heavy ornamental gate in Arcadia runs $350 to $750 per hinge, depending on gate weight and access.
Post Replacement
Arcadia’s soil, especially up against the foothills in 91006 and 91066, shifts with the seasons. A gate post that was plumb ten years ago can be leaning two degrees today, and that’s enough to drag an 18-foot gate at the latch side. We set posts deeper than the original installers did, use proper concrete footings, and square the gate to the post before welding anything. Post replacement here typically runs $600 to $1,400, and the price is quoted and agreed before any work starts.
Rail Repair
Custom iron gates on Arcadia’s estate properties often have rolled or channel rails that rust from the inside out. We cut out the bad section, weld in matching stock, and grind the repair smooth before repainting. On gates that were custom-fabricated overseas, we match the original rail profile as closely as the material allows. Rail repair work in Arcadia usually falls between $250 and $600 per section.
Custom Welding
This is where we spend a lot of our time in Arcadia. When a weld fails on a heavy swing gate, we don’t haul the gate to a shop. We weld on site in your driveway, which means the gate stays hung and the operator adjustments happen with the gate in place. That’s how you get a repair that actually holds. Custom welding in Arcadia runs $175 to $450 for a typical cracked weld repair, with larger fabrication jobs priced after we look at the gate in person.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arcadia
Most of the automated gates we work on in Arcadia run on Linear, Viking, or DoorKing operators, and we carry parts for all three. We also service Ghost Controls openers on some of the smaller courtyard gates around the city. Because so many Arcadia gates are custom jobs, we keep a deeper stock of hinge barrels, post caps, and weld brackets than you’ll find at the parts counter. That means faster turnaround when your gate is down and the driveway is blocked. We’re certified on nine major gate brands, so the operator doesn’t have to be a guessing game.
Common Gate Parts & Welding Problems We See in Arcadia Homes
- Santa Ana wind damage to hinge welds. The wind that comes down through the foothill corridors in Arcadia loads up a tall ornamental gate like a sail. We see hinge welds crack along the post side, especially on gates with solid iron panels that catch the full force of the wind.
- Overseas-fabricated gates with non-standard hardware. Many custom gates on Arcadia’s newer estates came from overseas fabricators. The hinge spacing, post dimensions, and weld details don’t match U.S. standards, so replacement parts often need cutting, shimming, or re-welding on site.
- Grease breakdown from dry heat. Arcadia’s summers bake operator gear assemblies until the grease turns to paste. That causes premature wear on heavy dual-swing operators and repeated limit-switch faults that look like electrical problems but are really mechanical ones.
- Post lean from soil movement. The combination of clay soil and seasonal moisture changes around Arcadia moves posts slowly over time. A gate that ran fine for years starts dragging, and the real fix is in the footing, not the hinges.
Pricing for Gate Parts & Welding in Arcadia, CA
Here’s what you can expect to pay in this market. Hinge replacement on a standard swing gate: $350 to $750 per hinge. Post replacement: $600 to $1,400 depending on depth and access. Rail repair: $250 to $600 per section. Custom welding for a cracked weld: $175 to $450. These are Arcadia prices, not national averages pulled off a chart. Heavy ornate gates, imported hardware that needs modification, and steep hillside driveways all push toward the higher end. Every estimate is free, and the price we quote is the price you pay, agreed before we touch the gate. Call (877) 610-2993 and we’ll come out, look at the gate, and give you a written number.
We Also Serve Cities Near Arcadia
Beyond Arcadia, we run calls to Mayflower Village, Sierra Madre, Monrovia, and Temple City. If your gate is down and you’re anywhere in the San Gabriel Valley, call us and we’ll tell you straight how soon we can be there.
Serving Arcadia, CA - Our Local Coverage Area
We’re based in the Arcadia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Arcadia
The welds on hillside gates in Arcadia keep cracking because Santa Ana winds funnel through the foothill corridors and load the gate panels laterally, which fatigues the weld joints at the hinge post. The original welds on many imported gates are also undersized for the weight of the panel. We cut out the failed welds, re-weld with full penetration, and often add gusset plates at the high-stress points. Call (877) 610-2993 and we’ll look at the gate and tell you whether the fix is a re-weld or a post issue.
Yes, we can match parts and hardware for overseas-fabricated gates, but it usually requires on-site modification rather than a direct off-the-shelf swap. Arcadia has more of these imported gates than almost any city in the San Gabriel Valley, so we’re used to working with metric post dimensions and non-standard hinge spacings. We cut, shim, weld, or fabricate what’s needed to make the replacement part fit the existing gate. Call (877) 610-2993 and describe the gate, and we’ll tell you what the repair will likely involve.
Yes, heavy iron gates in Arcadia do need more frequent hinge and roller service than in Pasadena, and the wind is the reason. Arcadia sits right at the base of the San Gabriels, so seasonal Santa Ana events hit these gates with wind loads that Pasadena, a few miles west, doesn’t get in the same way. Add the dry summer heat breaking down grease in the operator gear assemblies, and the service interval shortens. Budget for hinge inspection every two years on a heavy ornamental gate here.
Yes, we can often reinforce an existing gate post rather than replace it, depending on how far it has moved and whether the steel is still structurally sound. The fix is typically a deeper concrete footing with added plate steel at the base, or a steel insert welded inside the post. We’ll tell you honestly if the post is too far gone, because patching a dead post just means you’ll call us again next year.
On a windy day in Arcadia, a photocell that keeps tripping is usually a gate alignment problem, not a bad sensor. The wind pushes the gate leaf slightly out of its beam path, and the sensor does exactly what it’s supposed to do. The fix is squaring the gate, tightening the hinges, and sometimes adjusting the operator’s closing force so the gate seats fully every time. Call (877) 610-2993 and we’ll sort out whether it’s the gate moving or the sensor itself.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arcadia since 2001.