Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Antelope
Gate parts and on-site welding in Antelope usually means one of three things: a rotted hinge post on a 1990s wood side-yard gate, a rust-jacked iron hinge on a driveway gate that won’t close square, or a legacy operator board that finally gave out after 30 Sacramento summers. We handle all three, and we do the welding in your driveway so the gate never leaves your property. If you live in the 95843 ZIP code and your gate is sagging, stuck, or failed an HOA inspection, call Hal at (877) 610-2993. We answer live, around the clock.
Hal Gatewood has been at this since 2001, and he’s seen more Antelope gates than most people have seen sunsets. The Gate Parts & Welding work we do in this area almost always comes back to the same root cause: gates installed in the late 1980s and early 1990s by the same handful of Sacramento developers, now failing in predictable patterns. Knowing which developer built your street tells us a lot about what’s behind the hinge before we even pull up.
Why Gatewood Fence & Gate Is Antelope’s Preferred Gate Parts & Welding Company
Antelope home owners between 50 and 70 have been burned before. They’ve had a national company quote one number on the phone and hand them another invoice at the door. That’s exactly why Hal publishes his address, puts his name on the invoice, and writes the 90-Day Done Right Promise into every job. If it’s not done right, he comes back. No runaround, no dispatch queue, no call center three states away.
When you call (877) 610-2993, a live person answers. At 2 p.m. or 2 a.m. That matters when a gate is stuck open and your dog is eyeing the street. We schedule work in Antelope quickly because we know the roads, the HOAs, and the gate stock on those streets. We don’t need GPS to find Antelope Creek Estates or the cluster of subdivisions off Walerga Road and Elverta Road. Hal or one of his guys has been down your block before.
Our reputation in Antelope comes from showing up in the window we promised and fixing the gate in place. We background-check and uniform every person who steps onto your property. You’ll know who’s coming, and if you want, you can drive to the shop and look Hal in the eye before any work is scheduled.
Our Gate Parts & Welding Services in Antelope
Here’s what we actually do for Antelope gates, in the order of how often we see the failure:
Hinge Replacement
Antelope tract homes from the 1985-2000 era came with Adjust-A-Gate style hinges on wooden side-yard gates. Those hinges were fine for the first 20 years. Now they’re pulling free from the stile, the screws are wallowed out, and the gate drags on the latch post. We replace the hinge with a heavier gauge unit and, when the wood is still sound, we through-bolt it so it never pulls loose again. In HOA-governed subdivisions, we match the existing finish or get the color approved before we touch a single screw.
Post Replacement
This is the big one in Antelope. A gate sags in the hinge post, not in the middle, and that’s where we start. The 4×4 cedar posts set in the 1990s are reaching the end of their life all at once. We excavate the rotted footing, set a new pressure-treated post or a steel post with a concrete footing, and hang the gate back so it clears the latch by at least half an inch. Fix the panel without the post and you’ll fix it twice. We say that because we’ve fixed the second fix too many times.
Rail Repair
The 105°F summer days in Antelope do a number on wood gates. Top rails crack along the grain, the frame twists, and the whole gate goes a little trapezoid-shaped. We weld steel stiffener plates inside the frame for ornamental iron gates, or we splice in new cedar rails for wood gates and re-square the frame before re-hanging it. The goal is a gate that closes square and passes an HOA sag-correction inspection, because we know that inspection is coming.
Custom Welding
When a hinge bracket tears off an ornamental iron gate, or a latch plate cracks at the weld, we weld it on site. In the Antelope Creek Estates HOA, our tech replaced a rotted hinge post on a 2002-era FAAC swing gate, re-welded the lower hinge bracket, and upgraded the old linear arm to a Ghost Controls operator after the HOA’s paint committee approved the factory bronze powder-coat. The gate closed square and passed the HOA’s sag-correction inspection the next morning. That’s the kind of job we do every week in Antelope: weld the bracket, fix the post, satisfy the HOA, and leave the gate working like it’s supposed to.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Antelope
We work on the operators and hardware Antelope gates actually have: Viking slide gate operators from the 1990s, Ghost Controls retrofit arms on newer swing gates, DoorKing boards on apartment and HOA entry gates, and Elite operators on higher-end driveway gates. We stock common replacement boards, hinges, and rollers locally so we’re not waiting on a truck from Texas when your gate is hanging half-open. When a board is obsolete, we tell you straight, then we give you the retrofit option that brings the gate up to current UL 325 safety standards rather than patching a 30-year-old board and hoping it survives the next heat wave.
Common Gate Parts & Welding Problems We See in Antelope Homes
Antelope has a very specific gate failure pattern, and once you’ve seen it two hundred times you can diagnose it from the curb:
- Warped wood gate frames from 105°F summer thermal cycling. The top rail cracks along the grain, hinge screws pull loose, and the gate starts dragging. This is the number one reason Antelope HOAs issue sag-correction notices between June and September.
- Rust-jacked iron hinges that snap latch welds in winter rains. The Mediterranean wet season gets moisture into the hinge barrel, the rust expands, and the weld at the latch plate fails before the homeowner realizes the post footing has shifted. We weld the latch plate back and fix the post so it doesn’t happen again next January.
- Obsolete control boards on original LiftMaster and Viking slide gate operators. These fail in clusters across 1990s subdivisions. The gate is stuck open, the board is discontinued, and there’s no UL 325 retrofit path without replacing the control and adding photo-eyes. We explain what can be done and what it costs before any work starts.
- Identical Adjust-A-Gate hardware failures block after block. Because the same developers built so many Antelope streets, the same hinge fails in the same way on every third house. We know the failure before we unload the tools.
Pricing for Gate Parts & Welding in Antelope, CA
Straight numbers, because you should know before you call. In Antelope, a hinge replacement on a wood side-yard gate typically runs $180-$340 depending on whether we need to repair the stile. A rotted post replacement runs $450-$800 for a 4×4 pressure-treated post set in concrete, more if it’s a steel post or a large driveway gate post. Rail repair and re-squaring a wood gate runs $220-$450. Custom welding work is quoted by the job, but a typical hinge bracket re-weld runs $120-$250. A full operator retrofit with safety edges starts around $1,400 and goes up depending on gate length and brand.
Every quote is written, and the price you approve is the price you pay. If you have a written estimate from another company, we’ll give you a free second opinion. There’s no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we’ll give you a number over the phone and a written price before any work begins.
We Also Serve Cities Near Antelope
We work throughout this corner of Sacramento County. If you’re in Foothill Farms, North Highlands, Citrus Heights, or Elverta, you’re inside our regular service area and we can usually get to you the same week. Antelope is home base for us though, and Antelope homeowners get the same live-answer phone line, same written pricing, and same 90-Day Done Right Promise as everyone else.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Antelope
Because the 4×4 cedar posts set in the late 1980s and early 1990s have rotted at the ground line. The hinge itself is often still mechanically fine; the wood holding it has turned to sponge. Bury a new hinge in a rotted post and the gate sags again within six months. We replace the post first, then hang a new hinge on sound wood. Call (877) 610-2993 and Hal will tell you if your post is worth saving or if replacement is the cheaper answer.
Sometimes it can be reinforced, usually it should be replaced. If the metal hinge body is intact but the bolt holes are wallowed out, we through-bolt with backing plates and the repair holds for years. If the hinge itself is cracked or the pin is seized, we replace it with a heavier gauge. Steel doesn’t weld well to the zinc plating on those old hinges, and we’d rather put in something stronger than polish a 30-year-old part. Estimates are free.
No, and it’s also a liability. UL 325 safety standards have required entrapment protection on automatic gates since 2000. A 1990s operator without photo-eyes or reversing edges is out of compliance, and if a child or pet is injured, the homeowner and the HOA both have exposure. We retrofit those operators with current safety devices where possible, and we tell you straight when the board is too old to retrofit and the right move is a new operator. Safety work like this involves wiring and moving metal under tension; it’s not a DIY job.
Yes. We’ve color-matched that exact bronze powder-coat for Antelope HOAs more times than we can count. We install the new post, weld the hinge brackets, and order the powder-coat to match the HOA’s approved spec. Then we submit the paperwork if your HOA requires a pre- or post-work inspection. We know how the Antelope HOA process works and we don’t fight it; we just get the color right the first time so you don’t get a violation letter after the work is done.
Two different failures, and they compound. The dry clay soil cracks away from post footings in summer, which loosens the post. Then the heat warps the wood frame, which racks the gate. The combination means a gate that was square in May can drag on the latch by August. The fix is a deeper concrete footing for the post and a steel stiffener inside the frame so the gate can’t rack in the heat. Fix both at once and you’re done for a decade instead of a season. Call (877) 610-2993 for a free estimate on the whole repair.
If you have a gate that’s sagging, rusted, or stuck in Antelope, call (877) 610-2993. Hal will answer, ask you where you are, and give you a straight answer about what’s wrong and what it’ll cost. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Antelope since 2001.