Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Antelope
When a gate motor quits in Antelope, you’re not just stuck opening a heavy gate by hand. You’re also facing an HOA architectural committee, a 30-year-old control board that nobody makes parts for anymore, and a gate that was hung before modern safety sensors existed. We handle all of it. Gatewood Fence & Gate services gate motors and openers throughout 95843, and we know exactly what’s behind the gates in Antelope’s tract neighborhoods because we’ve been opening them since 2001. Call (877) 610-2993 and you’ll get Hal or someone from his crew, not a phone tree.
Why Gatewood Fence & Gate Is Antelope’s Preferred Gate Motor & Opener Company
Most Antelope homeowners we meet have already had a bad experience with a gate company that sent someone out, swapped a part that didn’t fix the problem, and disappeared. That’s the opposite of how we work. Hal Gatewood started this company in 2001, and his name is still on the shop and on every invoice. When a gate motor fails in Antelope, the person who shows up knows the difference between a Linear LDO from 1996 and a LiftMaster LA400 from 2004, because we’ve serviced hundreds of both in this zip code alone.
We answer the phone at all hours. Not a voicemail, not an answering service in another state. A live person. And every job we do in Antelope carries the 90-Day Done Right Promise in writing. If it’s not right, one call brings us back. No fine print, no “up to 90 days,” no runaround.
Because we’re Gate Motor & Opener specialists and not a general handyman service, we carry the boards, photo-eyes, and hinge hardware that Antelope’s older gates actually need. That means less waiting on parts and more same-visit fixes.
Our Gate Motor & Opener Services in Antelope
Motor Repair
A dead gate motor in Antelope is usually one of three things: a fried control board, a seized gearbox, or melted capacitor from a 105-degree summer. We diagnose it on site, show you what failed, and give you the price before we touch a tool. If the motor can be repaired, we repair it. We don’t push replacement on a motor with life left in it. If the board is obsolete, we’ll tell you straight and lay out retrofit options.
Motor Installation
Installing a new gate motor in Antelope means more than bolting on a new operator. It means matching HOA powder-coat color chips, re-pouring post footings that have rotted out, and running power to UL 325-compliant photo-eyes and edge sensors. We handle the full install, and we make sure your HOA’s architectural requirements are met before final inspection. Every new motor we put in Antelope is sized for the actual gate weight, not what the box claims.
Linear Motor Service
Antelope’s 1980s and 1990s tracts have more original Linear operators than almost anywhere we work. The Linear LDO and related models were the builder default in 95843 subdivisions. These are solid motors, but their control boards are aging out. We service the full Linear line, and when a board is truly dead, we can often retrofit a modern controller to the existing arm and save you a full replacement.
Slide Motor Service
Slide gates in Antelope are less common than swing gates, but we see them on larger lots and a few of the newer custom homes off Walerga Road and Antelope Road corridors. Slide motor problems are usually track alignment, roller wear, or limit switch failure, and we fix those in place. If your slide gate jerks, drags, or reverses mid-travel, that’s a fix we can typically do in one visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Antelope
We’re certified to work on nine major gate motor brands, but around Antelope the ones we see every week are Viking, LiftMaster, Linear, and DoorKing. We keep common Viking and LiftMaster parts stocked on the truck so an Antelope repair doesn’t stretch into a week of waiting on shipping. When a customer needs a part we don’t have on hand, we source it fast and keep you updated. Hal has been servicing these brands since the early 2000s, long before most of Antelope’s original operators started failing en masse.
Common Gate Motor & Opener Problems We See in Antelope Homes
- Obsolete 1990s control boards. Antelope’s build-out era means a large share of original Linear and early FAAC boards are now dead or dying from heat and capacitor rot. Parts for these boards are discontinued, so we walk you through retrofit versus replacement with real numbers.
- Rotted 4×4 cedar hinge posts at the soil line. Wet Mediterranean winters soak the post base, then 105°F summers dry the soil and crack it. The post loosens, the gate sags, and the motor strains until it burns out. We re-pour the footing, reset the post, and rehang the gate square.
- Bypassed or missing safety photo-eyes. Many Antelope gates were installed before modern UL 325 safety rules. We regularly find openers with the photo-eyes jumped out or hanging loose. Your HOA may flag this on inspection, and it’s a genuine safety risk. We retrofit current UL 325-compliant sensors and edge protection.
- Undersized motors on heavy ornamental iron gates. The powder-coated iron gates on Antelope’s higher-end streets are heavy, and many were paired with operators rated for a lighter gate. The motor works until it doesn’t. We size replacements to the actual gate weight and cycle frequency.
Pricing for Gate Motor & Opener in Antelope, CA
A straightforward motor repair in Antelope typically runs $185 to $340, which covers diagnostics, the part, and the labor for most common failures. A full operator replacement with a new motor and control board runs $1,200 to $2,800 depending on gate size, brand, and whether we’re also repouring a post footing or adding safety sensors. Battery backup installation adds roughly $500 to $850 on most Antelope gates. Every price is quoted and agreed before we start. No surprises at the door. Call (877) 610-2993 for an exact quote, and remember: there’s no trip charge inside the county, and we’ll give you a free second opinion on any written estimate.
We Also Serve Cities Near Antelope
We run our trucks from the Sacramento metro office into Antelope and the surrounding communities. If you’re in Foothill Farms, North Highlands, Citrus Heights, or Elverta, we’ll bring the same repair-first approach and the same 90-Day Done Right Promise. The Gate Motor & Opener in Antelope work we do gives us a good read on the whole corridor, and we’re glad to help anywhere nearby.
Serving Antelope, CA - Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Antelope
Yes, in most Antelope HOA-governed tracts, you’ll need architectural committee approval before replacing a gate motor or opener, especially if the new unit changes the gate’s appearance or requires a different mount. We’ve worked with many of the HOAs in 95843 and can help you prepare the submittal with the right specs, powder-coat color, and equipment list. Call (877) 610-2993 and we’ll walk you through what your specific HOA will ask for.
Probably, yes. The Linear LDO and similar controllers installed throughout Antelope’s 1985-2000 tracts are largely out of production, and capacitor rot from Sacramento Valley heat is the usual culprit. In many cases we can retrofit a current controller to your existing arm and motor, which costs a fraction of a full operator replacement. We’ll diagnose it on site and show you the failed component.
Yes, most existing Antelope openers can accept a battery backup, and it’s a smart addition if your gate is your only vehicle access during a power outage. We install battery backup on Viking, LiftMaster, Linear, and DoorKing operators regularly. The install typically runs $500 to $850 depending on the operator model and whether we need to add a separate enclosure. Call (877) 610-2993 for a firm price on your specific unit.
Because Antelope’s clay soil shrinks and cracks in the summer heat, loosening the post footing and letting the gate drop just enough to bind. When the wet winter returns, the soil swells and temporarily re-tightens the post, which masks the problem. We fix it permanently by re-pouring the footing and re-hanging the gate level, so the motor isn’t fighting a sagging leaf every cycle.
It means your operator needs functioning UL 325-compliant photo-eyes and, on most gates, an edge sensor that reverses the gate when it meets resistance. Many original Antelope operators had these bypassed or never installed. We retrofit current UL 325 sensors and edge protection on older operators regularly. It’s a genuine safety issue, not just an HOA box to check. Call (877) 610-2993 and we’ll quote the retrofit.
Contact Gatewood Fence & Gate in Antelope
If your gate motor is dead, noisy, or half-working in Antelope, call us. We’ll answer with a live person, give you a straight diagnosis, and show up when we say we will. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job. Call (877) 610-2993 or stop by the shop and look Hal in the eye. The name is on the door, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Antelope since 2001.