Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Amherst
Gate parts and welding in Amherst usually means one of three things: a hinge post that heaved out of the ground over the winter, a weld that snapped under snowbelt wind, or hardware so corroded from Transit Road salt spray it won’t open at all. Most repairs here run $140 to $480 depending on whether we’re replacing hinges, resetting a post, or welding a broken rail. Gatewood Fence & Gate handles it all on site, and a live person answers when you call (877) 610-2993.
Hal Gatewood has been fixing gates since 2001. That means we’ve seen what Amherst winters do to steel and wood year after year, and we fix it so it stays fixed, not just patched until next April. Call the number above and you’ll talk to someone who can actually schedule the work, not a queue.
Why Gatewood Fence & Gate Is Amherst’s Preferred Gate Parts & Welding Company
We’re the shop that repairs what other companies want to replace. A gate sags in the hinge post, not in the middle, and that’s where we start. Fix the panel without the post and you’ll fix it twice. Residents in Eggertsville, Snyder, and the neighborhoods off Maple Road have had us out enough times that they know the drill: we show up, look at the actual gate, quote a number, and get to work.
Every job at Gatewood carries the 90-Day Done Right Promise in writing. If it’s not right, Hal comes back. No runaround, no service ticket maze. The price we quote before any work starts is the price on the invoice. We’re locally owned and owner-operated with a published address, and that address means something when you want to look someone in the eye after the job’s done.
Amherst homeowners reach us fast because we’re not coordinating from three states away. Dispatch and scheduling are handled from the brand’s New York City office, and crews serve Amherst locally. The person who shows up at your gate is background-checked and uniformed, and Hal’s name is on the invoice.
We also honor a few standing offers without haggling: $40 off any repair over $200, no trip charge inside Erie County, a free second opinion on any written estimate you’ve gotten elsewhere, and a permanent 10% discount for seniors and veterans.
Our Gate Parts & Welding Services in Amherst
Here’s the honest breakdown of what we do most often for Amherst homeowners, with the specific local conditions that drive each repair. Our full Gate Parts & Welding team carries the hardware and welding rig to finish most jobs in one visit.
Hinge Replacement
Amherst gate hinges take a beating from two directions: freeze-thaw cycling every winter and salt spray from roads like Sheridan Drive and Transit Road. Standard mild-steel hinges corrode and seize within three to five winters, leaving gates that drag, squeal, or won’t hold a latch. We replace with stainless or powder-coated adjustable hinges sized to the gate’s weight and wind exposure, and we align the leaf so it closes true instead of fighting the post.
Post Replacement
This is the most underestimated repair in Amherst, and the one that matters most. In the clay-heavy soil of older Eggertsville and Snyder lots, a wooden post set above the 42-inch frost line will heave every single winter. No hinge adjustment fixes a post that has moved three inches. We dig out the old footing, set a new galvanized steel or properly treated post below the frost line, and embed it in concrete with drainage gravel so water doesn’t pool and re-freeze against the steel.
Rail Repair
Solid infill gates, the wood-paneled swing gates on 1960s Colonials and ranches, catch a lot of wind off Lake Erie. When a gust hits a solid panel, the load lands on the rail-to-post welds or the through-bolts at the hinge stile. We reweld snapped rails on site, so the gate stays in your driveway instead of getting hauled to a shop, and we add corner gussets or mid-rail bracing where the design was never built for snowbelt gusts.
Custom Welding
Not every broken gate has a drop-in replacement part, especially on 40-60-year-old original gates that were built in a driveway by a previous owner. We fabricate and weld brackets, hinge plates, rail extensions, and latch strikes on site. Custom welding means the patch matches the gate and the load it actually carries, not whatever part happens to be on a shelf.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Amherst
We’re certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Amherst customers, that means we can pull parts and diagnose operator faults the first visit instead of ordering blind and hoping. We service Viking and DoorKing openers regularly in the neighborhoods off Maple Road, and Ghost Controls kits are common on the newer vinyl and ornamental aluminum gates around the UB North Campus corridor. We keep the most-needed arms, boards, and safety sensors on the truck.
Common Gate Parts & Welding Problems We See in Amherst Homes
- Frost heave on hinge posts. Clay soil and a water table close to the surface mean posts without footings below 42 inches shift every winter. A gate that dragged last March will drag again next March unless the post gets reset properly.
- Road salt corrosion on hardware. Properties within salt-spray range of Transit Road, Maple Road, and Sheridan Drive see hinges, latches, and frame welds oxidize fast. Mild steel gives out in a few winters and the gate hangs loose or seizes shut.
- Wind load failures on solid infill gates. High wind off Lake Erie hits wood-paneled gates like a sail. The weakest point fails first: a snapped rail weld, a torn hinge screw, or a split post at the hinge stile.
- Worn rollers on slide gates. Amherst’s sandy spring runoff and winter road grit gets into roller bearings, and clay dust works into the track. We replace with sealed-bearing rollers and clean the track so the gate doesn’t grind itself to a stop.
Pricing for Gate Parts & Welding in Amherst, NY
Here’s what Amherst homeowners can expect to pay. Hinge replacement typically runs $140 to $280 depending on gate weight and how many hinges we’re swapping. Post replacement runs $320 to $650 for a single post, including new concrete below the frost line and disposal of the old footing. Rail repair by welding generally lands between $180 and $420, and custom welding work starts around $160 and goes up with time and material. The price we quote before any work starts is the price you pay. Estimates are free, and we’ll put the number in writing so you can compare.
We also remind every Amherst customer: if you’ve got a written estimate from another company, we’ll give you a second opinion at no charge. And every job gets the 90-Day Done Right Promise, not as a sales line, but stamped on the invoice.
We Also Serve Cities Near Amherst
Our crews cover Amherst and the surrounding communities, including Eggertsville, Williamsville, Kenmore, and Tonawanda. Same crews, same pricing, same promise. If you’re within Erie County, the trip charge is zero, and the estimate is free.
Serving Amherst, NY - Our Local Coverage Area
We’re based in the Amherst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Amherst
Your hinge post is almost certainly heaving out of the clay. In Amherst’s snowbelt, freeze-thaw cycles push posts set above the 42-inch frost line out of plumb by two or three inches every winter, and no hinge adjustment compensates for that. The fix is resetting the post in a deeper concrete footing, and then aligning the gate to the new post. Call (877) 610-2993 for an exact quote; the estimate is free.
Yes, and this is one of the most common calls we take in Amherst. We grind back the rust and corroded metal to clean steel, weld the frame with full-penetration passes, and then treat and seal the repaired area so it doesn’t re-corrode at the weld interface in two winters. If the post is also compromised, we’ll tell you honestly before welding anything to it.
You can absolutely replace just the post, and in most cases the gate panel is reusable. We cut the post below the rot line, extract the old footing, set a properly treated wooden or galvanized steel post below the 42-inch frost line, and remount the original gate with new hinges and a new latch set. A whole new gate is only called for if the panel itself is structurally gone.
Most Amherst gate operators have a manual release mechanism, usually a pull handle, key, or lever on the operator itself, that disengages the drive from the gate so you can push it open by hand. Viking and DoorKing models use a release key or pull tab located on the motor housing; Ghost Controls kits use a pull-pin on the arm. Do not try to force an electric gate open without releasing the operator first, because you can strip the drive gears for good. If you can’t locate the release, call us and we’ll walk you through it.
Amherst’s spring runoff carries fine sand and clay grit into the roller bearings, and winter road treatment leaves salt residue in the track. Open bearings grind themselves out in a season or two. We replace with sealed-bearing rollers sized for the gate’s full travel weight and clean the track bed so the new rollers aren’t rolling through abrasive mud from day one. A slide gate that eats rollers usually has a track alignment problem, not just a bearing problem, and that’s what we look for first.
Contact Gatewood Fence & Gate in Amherst, NY
If your gate is sagging, dragging, seizing up, or won’t stay latched, call (877) 610-2993 today. We’ll give you a straight answer, a written estimate, and a time window we actually keep. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Amherst since 2001.