Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alliance
Gate Installation in Alliance usually means one of three things: a hinged gate that has started dragging on the ground, a rusted-through frame at a weld point, or a post that has leaned far enough out of plumb that the latch no longer lines up. Most of the gates we work on in Alliance are original to the house, 60 to 80 years old, and worth repairing rather than replacing. A typical hinge replacement or post re-set runs $180 to $520 depending on what the clay soil has done to the footing. Call (877) 610-2993 and you’ll get a live person who can schedule a look at the gate, usually the same day or next morning.
Why Gatewood Fence & Gate Is Alliance’s Preferred Gate Parts & Welding Company
Hal Gatewood has been fixing gates since 2001 and still answers to his own name. That matters in a town like Alliance, where a handshake at the hardware store still counts for something. We work on the gates across Alliance, from the older blocks near downtown out to the postwar streets around Mount Union, and we treat every job like the homeowner will see us again next week. Because they will.
Our Gate Parts & Welding crew welds on site. The gate stays in your driveway. We do not haul a 1950s wrought iron gate across town to a shop, and we do not tell you to buy a new one because a hinge post rotted. Local customers in Alliance know the difference. We show up in the window we gave you, we quote the price before any work starts, and the quote does not change at the door.
Every job carries the 90-Day Done Right Promise in writing. If a weld fails or a post shifts, one call brings Hal back. No runaround. And we answer the phone around the clock with a live person, not a voicemail tree.
Our Gate Parts & Welding Services in Alliance
Post Replacement
This is the most common call we get in Alliance, especially from March through April. Original mid-century gate posts were set shallow in Stark County’s heavy clay, frequently without gravel drainage. Then the freeze-thaw cycle does its work: water saturates the clay, freezes, heaves, and the post leans a little more every winter. By spring the gate drags or will not latch. We dig out the old footing, set a new galvanized or powder-coated post in concrete with a proper gravel base, and weld the hinges back square. A post replacement in the 44601 area typically runs $240 to $520 depending on whether we are also re-hanging a heavy iron gate.
Rail Repair
Alliance’s original 1930s through 1960s gate frames rust through where water sits, and water always sits at the welded hinge and latch points. On a rail repair we cut out the rotted section, weld in new steel plate or rail section, grind it smooth, and prime and paint so the repair does not flash rust. If the top rail has rusted through on a tubular steel gate, that is a safety issue waiting to become a sagging panel. Rail welding repairs in Alliance run $150 to $400 depending on how much of the frame has gone.
Custom Welding
Not every fix is a straight replacement part. On narrow Alliance lots, where a swing gate cannot clear a neighbor’s fence or a parked car, a slide gate conversion sometimes makes more sense. We fabricate slide gate frames, weld roller mounts, and build the catch post to match the existing fence line. Custom welding also covers latch plates, drop rods, and gate extensions when a gate has sagged and the panel needs a cut and weld to square it back up. Custom fabrication work in Alliance starts around $300 and goes up with the amount of steel involved. We quote it before we strike an arc.
Gate Rollers
Slide gates and cantilever gates live or die by their rollers. When a roller seizes or the wheel wears flat, the gate shudders and eventually will not move. We replace roller assemblies, weld in new mounting brackets where the originals have torn, and re-level the track so the gate rolls instead of fighting it. Anything we weld or bolt on in Alliance carries the same 90-Day Done Right Promise as a full panel replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alliance
We are certified to service Gate Motor & Opener in Alliance brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Alliance, we see more FAAC and BFT operators than anything else, especially on the older automated gates near Mount Union and the commercial lots along State Street. We keep common hinge sets, roller assemblies, and latch hardware in the truck so a repair does not get held up waiting on a parts order. When the part is not on the truck, we can usually have it within 24 to 48 hours and schedule the second trip before we leave your driveway.
Common Gate Parts & Welding Problems We See in Alliance Homes
- Leaning hinge posts in spring. Alliance’s clay soil freezes and heaves every winter. Posts set without gravel drainage shift several inches out of plumb, and the gate binds or drags. This is the single most common repair call we run in Alliance each March and April.
- Rust-through at weld points. Original 1930s to 1960s gate frames were stick-welded at the hinge and latch points. Seventy years of Ohio moisture has eaten the steel from the inside. These fail slowly, then suddenly, and usually at the worst moment for whoever is trying to leave for work.
- Swing gates that cannot clear a neighbor’s fence. On close-set worker-home lots along streets like East Main and South Union, a swing gate’s arc often crosses into a neighbor’s fence line or a shared driveway. A slide gate retrofit solves the clearance problem without moving the fence.
- Shallow-set posts with no drainage. We regularly pull Alliance’s original posts and find nothing under them but packed clay. No gravel, no concrete collar, just a two-foot hole and sixty years of winter waterlogging. That is the root cause, and fixing the panel without fixing the post means fixing it again next spring.
Pricing for Gate Parts & Welding in Alliance, OH
Here are honest numbers for the Alliance market. Hinge replacement on a residential swing gate runs $180 to $340, labor and hardware included. Post replacement runs $240 to $520 depending on post size and whether we are resetting one post or digging out a rotted double-post assembly. Rail repair welding runs $150 to $400. Custom welding projects start around $300 for a small fabrication job and go higher for slide gate conversions or full frame rebuilds. The price we quote is the price you pay, agreed before any work starts. We never adjust the number at the door. Call (877) 610-2993 for an exact quote on your gate. The estimate is free, and if you already have a written quote from someone else, bring it to us. We will give you an honest second opinion at no charge.
We Also Serve Cities Near Alliance
Our crews work across Stark County and the surrounding towns. We regularly run calls to Louisville, Salem, Canton, and North Canton for the same gate parts and on-site welding work we do in Alliance. If you live just outside the 44601 ZIP, give us a call. We will tell you straight whether we can get to you the same day.
Serving Alliance, OH - Our Local Coverage Area
We’re based in the Alliance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alliance
Because Alliance sits on heavy clay soil that frost-heaves every winter. The original posts, especially on gates installed between the 1930s and 1960s, were set shallow without gravel drainage beds. Water pools at the base, freezes, expands, and pushes the post a bit further out of plumb each cycle. By the time the thaw hits in March, the gate drags or the latch will not line up. The fix is digging the post out, setting it properly in concrete over gravel, and welding the hinges back square. Call (877) 610-2993 and we can tell you over the phone whether your post needs a re-set or a full replacement.
Yes, and that is how we prefer to work. We weld on site, in the driveway, with the gate still hanging where it belongs. The setup works on tight Alliance lots and shared driveways because the crew works from the vehicle side and the house side without blocking the neighbor’s access. We have done exactly this on a shared driveway off East Main Street near the old industrial corridor, where a rotted hinge post on a two-lot gate was leaning three inches out of plumb. New post, new heavy-duty hinges, a sag correction bracket welded to the rail, and both neighbors had vehicle access again the same day. Call (877) 610-2993 and describe your gate. We will tell you if it can be welded in place.
Usually yes. A slide gate runs on rollers along the fence line instead of swinging through an arc, so it needs straight clearance along the run rather than a wide swing radius. On Alliance’s older blocks, where homes and fences sit close together, a slide gate retrofit often solves the problem without touching the neighbor’s property. We fabricate the slide frame, mount the rollers, set the catch post, and match the new gate to your existing fence line. It is more steel and more fabrication than a hinge swap, but the payoff is a gate you can actually use. Call (877) 610-2993 for a free site visit and a written price.
Yes. We install Gate Access Control in Alliance using operators from FAAC, BFT, Linear, and the other major brands on existing gate frames, including the vintage iron and tubular steel gates common here. When the gate serves a pedestrian walkway as well as a vehicle entrance, we set the operator with a delay and safety edge so the gate stops and reverses on obstruction, and we keep the walkway clear during the install. We schedule the work so you are not locked out of your own driveway while we mount and wire the operator. Call (877) 610-2993 to talk through the install.
Typically yes, because the panel is not the problem. The post is what holds the gate square and level. If the post has shifted in the clay, pulling it straight and shimming it will last one season at most. The steel tube below grade is usually rust-weakened too. We dig out the old post, inspect it, and tell you straight whether it can be salvaged. In most Alliance cases we recommend a full post replacement with proper concrete and gravel backfill. It costs more than a shim job, but it is the difference between a gate that works for 20 years and a gate you will call us about again next April. Call (877) 610-2993 and we will look at it.
Call Gatewood Fence & Gate for Gate Parts & Welding in Alliance, OH
If your gate is dragging, sagging, rusted through, or leaning toward the neighbor’s fence, call (877) 610-2993. A live person answers. We will ask about the gate, the lot, and what it is doing, and we will give you a straight answer about what it will take to fix it. Estimates are free. The price is quoted before work starts and it does not change. Hal Gatewood has been at this since 2001, and his name is on every job we do in Alliance.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alliance since 2001.