Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alliance
Gate installation in Alliance, OH usually costs between $1,800 and $4,600 for a standard driveway gate, with sliding gates on the higher end because of the track work and motor. We can typically get a new gate measured, quoted, and scheduled within 3 to 5 business days. If you’ve got an old gate that’s rusted through or posts that lean every spring, call (877) 610-2993 and we’ll walk the site with you before any money changes hands.
Alliance isn’t a suburb with wide lots and fresh construction. Most of the homes here were built between the 1920s and 1960s, and the gates that came with them were heavy steel or wrought iron set directly into Stark County clay. That changes how we install. It changes how deep we dig. And it’s why we don’t treat Alliance like every other town in the county.
Why Gatewood Fence & Gate Is Alliance’s Preferred Gate Installation Company
Hal Gatewood has been running this shop since 2001. His name is on the building, his license number is published, and when you call, a live person answers. Not a voicemail tree. Not a call center three states away. You get a human being who knows what a gate post looks like after 60 winters in Ohio clay.
We’ve worked on enough Alliance properties to know what holds up and what doesn’t. The person who shows up to your house is background-checked and uniformed, and the price you’re quoted before the work starts is the price you pay. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we come back and make it right. One call. No runaround.
Our Gate Installation team handles everything from a simple pedestrian gate on a downtown side lot to a full sliding driveway gate off East Main Street. We weld on site, which means your gate doesn’t leave your driveway on a trailer. And because we’ve been doing this for over 29 years, we’ve got a fair idea of how Alliance’s soil, weather, and housing stock interact before we even put a shovel in the ground.
Our Gate Installation Services in Alliance
Driveway Gate Installation
A driveway gate in Alliance is more than curb appeal. It’s the thing that keeps a neighbor’s delivery truck from turning around in your yard and keeps the dog from following a squirrel into traffic. Most driveway gates we install here are steel or aluminum, sized to the vehicle opening, and set on posts that go deep enough to survive a Stark County freeze-thaw cycle. On the narrow lots near downtown, we often recommend a sliding gate so you don’t have to sacrifice driveway space for a swing arc.
Pedestrian Gate Installation
Pedestrian gates are the workhorses of Alliance’s older blocks. They take daily use, kids slamming them, dogs running into them, and Ohio weather for sixty years at a stretch. We install them with the same post-depth and drainage standards as our driveway gates, because a sagging pedestrian gate is just a smaller version of the same problem. If your side yard gate won’t latch or drags on the ground every March, the fix is usually at the post, not the latch.
Sliding Gate Installation
Sliding gates are the answer for Alliance properties where a swing gate simply won’t fit. Tight side yards, shared driveways, and lots where the fence line sits close to the house all point toward sliding hardware. We’ve installed them on rights of way off East Main Street where a swing gate would have blocked a neighbor’s access. The track and motor cost more than a swing setup, but when space is the constraint, it’s the only choice that works.
Swing Gate Installation
A swing gate works when you’ve got the room for the arc. On Alliance’s mid-century worker-home lots, that room isn’t always there, which is why we measure twice and talk through the clearance before we recommend anything. If there’s a sidewalk, a fence line, or a parked car in the swing path, we’ll tell you. A gate that opens into the neighbor’s fence is a problem you’ll hear about.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alliance
We’re certified to service nine major gate brands, and for Alliance customers that includes FAAC and BFT operators and Linear access controls. We keep common repair parts in stock so you’re not waiting on a ground shipment from Texas while your gate sits open. If you’ve got a Viking or Linear opener on an existing gate, we can install around it or replace it cleanly. What we won’t do is sell you a brand swap you don’t need. If the motor’s fine and the post is the problem, we fix the post.
Common Gate Installation Problems We See in Alliance Homes
- Posts set shallow in clay soil. Original mid-century posts in Alliance were often sunk barely two feet into clay with no gravel drainage. Sixty years of freeze-thaw heaving later, they lean, and the gate drags. New installations here need over-excavation and drainage beds or the same failure returns in two winters.
- Swing gates on narrow shared driveways. We see gates that were installed swinging inward or outward without checking the neighbor’s side. They bind on the adjacent fence or block the shared vehicle path. A sliding gate usually solves this, but only if it’s planned before concrete gets poured.
- Operators skipped for entrapment protection. Alliance’s thaw-heaved ground leaves photocells misaligned and safety edges pinched, which creates a hazard. New automatic gates need properly mounted entrapment protection that’s re-checked after the first spring thaw.
- Rust remediation ignored. In a town with 60-to-80-year-old wrought iron gates, surface rust isn’t cosmetic. It’s structural. We address corrosion at the hinge points and post bases during installation, because a new gate hung on a rusted-old post is a failure waiting to happen.
Pricing for Gate Installation in Alliance, OH
Here are straight numbers for Alliance’s market. A standard single driveway swing gate runs $1,800 to $3,200 depending on material and width. A sliding driveway gate runs $2,800 to $4,600 because of the track, motor, and extra post work. A pedestrian gate typically runs $600 to $1,200 installed. If you’re adding an automatic opener, budget $900 to $2,200 on top of the gate itself, depending on whether you need a FAAC or BFT motor and whether entrapment protection and a keypad are included. Every quote is given in writing before any work starts. The number we give you is the number you pay.
Call (877) 610-2993 for a free estimate. We don’t charge a trip fee inside the county, and if you’ve got a written estimate from another company, we’ll give you a free second opinion.
We Also Serve Cities Near Alliance
We run crews to Louisville, Salem, Canton, and North Canton every week. The drive times are short, and we know the same freeze-thaw clay patterns carry across the county line. If you’re outside Alliance, call and ask. If we can get to you reasonably, we will. And if you’re inside the county, there’s no trip charge to find out.
Serving Alliance, OH - Our Local Coverage Area
We’re based in the Alliance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Alliance
Gate posts in Alliance should go at least 42 inches deep with a gravel drainage bed beneath the concrete. Alliance’s heavy clay soil holds water and heaves during Northeast Ohio’s freeze-thaw cycles. A post set shallow, like many original mid-century installs, will shift out of plumb within two winters. We over-excavate every post hole in this area and add drainage as standard practice. Call (877) 610-2993 and we’ll tell you what your current posts look like.
Yes. On Alliance’s narrow shared driveways, a sliding gate is usually the right answer because it tracks parallel to the fence line instead of sweeping across the neighbor’s side. We installed one off East Main Street where a swing gate would have blocked the neighbor’s vehicle access entirely. The track and motor cost more, but it’s the only option that preserves both sides of the driveway.
Yes. Any new automatic gate in Ohio needs entrapment protection, and Alliance’s thaw-heaved ground makes proper photocell alignment and safety edges critical. We set them during installation and re-check them after the first spring thaw. If a contractor skips this, the gate is dangerous and won’t meet code. We don’t skip it.
A sliding gate is generally the best fit for Alliance’s older worker-home lots where the side yard is tight and the fence line sits close to the house. Swing gates need clearance for their arc, and many of these lots simply don’t have it. A pedestrian gate with a sliding driveway gate gives you access without eating your parking.
Because the post heaved. Alliance’s clay soil expands and contracts through the freeze-thaw cycle, and if the post wasn’t set deep enough with drainage, it moves. We see this every March and April on gates installed by contractors who don’t know local soil. The fix is pulling the post, over-excavating, adding gravel, and re-setting it to 42 inches. Call (877) 610-2993 and we’ll look at it.
Call for a Straight Answer on Gate Installation in Alliance
If you live in Alliance and you’re tired of a gate that sags, drags, or won’t hold, call Hal’s shop at (877) 610-2993. You’ll get a live person, a straight price, and the name of the guy whose name is on the shop. We’ll come out, measure, and give you a written quote before any work starts. And when we finish, the 90-Day Done Right Promise is on paper. That’s how we’ve done it since 2001.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alliance and Stark County since 2001.