Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Alamo
If you live in Alamo, you know your gate is not a decoration. It’s the first thing that opens when a truck pulls in, the thing that keeps a horse from wandering onto Stone Valley Road, and the thing that groans every time the Diablo wind kicks up. We repair gate parts and weld on site across Alamo, and we’ve been doing it since 2001. Hal Gatewood answers the phone himself. Call (877) 610-2993, tell us what the gate is doing, and we’ll get out to look at it.
Most Alamo properties have gates that are wider, heavier, and more loaded than anything you’ll find in Walnut Creek or Danville. That changes which parts fail, where they fail, and how you fix them. Our Gate Parts & Welding team works on oversized equestrian gates, shared driveway gates, and custom ornamental steel that has been twisting in valley wind for 30 years. We know the zip code. We know the gravel drives. We know the hinge posts.
Why Gatewood Fence & Gate Is Alamo’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001. The name is on the shop, the address is published, and the license number is something anyone can look up. That matters in Alamo, where a lot of people have already paid a big outfit to quote one number on the phone and charge a different one at the door. We don’t work that way. You get a price up front, in writing, and it doesn’t change when we show up. Every job carries a 90-Day Done Right Promise. If it’s not done right, one call brings Hal back. No runaround.
We answer the phone with a live person 24 hours a day. You call at 6 a.m. because the gate won’t close and the horses are out, you get Hal or somebody on his crew, not a voicemail tree. We serve Alamo locally, which means the person who picks up the phone actually knows what Stone Valley Road looks like after a wind event. We’re not guessing from a map in another state.
We are certified to service Viking, Ghost Controls, DoorKing, and Elite equipment, among others. But the bigger credential is this: we weld on site. We don’t haul your gate off to some shop across the county and leave your driveway open for a week. The gate stays in your driveway, the welder comes to it, and the job gets done where you can watch it happen.
Our Gate Parts & Welding Services in Alamo
Hinge Replacement
On an Alamo equestrian gate, the hinge is the point where the entire weight of the gate meets the post. A 16 ft leaf weighs a lot more than the hardware was spec’d for when the driveway was first cut. We see hinge posts that have cracked at the weld, hinge pins that have ovaled out, and face plates that have pulled free of the post. We replace the hinge and resurface the post seat so the gate hangs true again. A gate sags in the hinge post, not in the middle, and that’s where we start.
Post Replacement
The other failure we see constantly in Alamo is the post itself. Specifically, gate posts that are undersized for the load. A standard 4×4 footing was never meant to carry a 16 ft dual-leaf steel gate, but that’s what a lot of these late-1980s estate properties were built with. We cut the old footing out, set the new post deeper in a proper concrete pour, and re-weld the mounting hardware. On sloped gravel drives near Stone Valley Road, we also check the grade. Fix the panel without the post and you’ll fix it twice.
Rail Repair
A wind-slammed gate often bends or cracks the rail before anything else fails. On Alamo’s open-frame wrought iron gates, the top rail is the first thing that takes a hit when a leaf gets caught by a gust and slammed into the end stop. We can fishplate a cracked rail, cut out and weld a new section, or straighten a bowed rail and add gussets so the same spot doesn’t fail again next October.
Custom Welding
Not every gate can be bought off a shelf. Alamo has too many odd-size openings, steep gravel drives, and shared driveway situations where a standard gate won’t fit. We build and weld custom gate frames, reinforce existing ones, weld out old rust, and fabricate brackets, stops, and receiver posts on site. If you’ve got two homes sharing one driveway, we can weld a receiver post that lets both sides keep using their remotes without one side overriding the other. If the gate operates, it leaves enough room for both of you.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alamo
We’re certified to work on Viking, Ghost Controls, DoorKing, and Elite openers and hardware, plus the full range of residential and light commercial systems you’ll find in the 94507 zip code. For Alamo homes with older LiftMaster and Linear equipment from the late 1980s and 1990s, we stock common replacement parts locally so we’re not waiting on a ground shipment to get your gate moving again. If the part is in our truck, it goes on that day. If it’s not, we tell you the truth and give you a date.
Common Gate Parts & Welding Problems We See in Alamo Homes
- Wind-stressed hinge posts on oversized gates. Diablo wind gusts put a lateral load on 14-16 ft equestrian gates that the original post footing was never designed to handle. Over a decade, the post cracks at the mounting plate, the gate starts to sag, and the opener strains until it trips or over-currents.
- Rack and pinion binding on gravel driveways. Alamo’s thick gravel drives shift with the seasons, especially after heavy winter rain. The grade under the gate changes slightly, the rack binds against the pinion, and the operator cycles hot. That’s not an electrical failure. It’s a mechanical one that a welder needs to address.
- Warped wood or composite gates from valley heat. Alamo summers regularly hit 100-plus degrees inland. Exposed wood gates warp and gap, and hardware lubricants bake out faster than anywhere closer to the coast. That means more hinge wear, more sag, and more re-welding during the late summer months.
- Photocell misalignment on shared driveways. When two or three homes share one gate, a wind gust can shift the photocell or mag-lock just enough that the gate auto-reverses mid-cycle for every vehicle. That’s usually a quick alignment fix, but if the post has moved, it’s a welding job.
Pricing for Gate Parts & Welding in Alamo, CA
A straight hinge replacement on a single-leaf Alamo gate typically runs $180-$340. Post replacement, which includes cutting out the old footing and pouring a new one, generally runs $400-$900 depending on post size and whether we’re re-welding the hinge plates the same day. Rail repair or a small custom welding job, like a cracked fishplate or re-welding a receiver post, usually lands between $150 and $350. For larger custom frames or rebuilding an oversized equestrian gate, expect $1,200-$2,800 depending on materials and labor. Every quote is written before we start work, and the price you agree to is the price you pay. We also offer $40 off any repair over $200, and there’s no trip charge inside Contra Costa County. Permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
We Also Serve Cities Near Alamo
Our local team works across the San Ramon Valley. Beyond Alamo, we take care of gate parts and welding in Saranap, Moraga, Walnut Creek, and Danville. If you’re a few miles out and wondering whether we’ll come, the answer is yes. Call and ask.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Alamo
Your driveway has shifted. Alamo’s gravel drives, especially those up toward Stone Valley Road, move with seasonal rain and dry spells. The gate’s posts stay put while the ground under the leaf drifts a few inches up or down, and suddenly the rack and pinion are binding. The opener over-currents and cycles hot, even if it’s a brand-new Viking or DoorKing unit. The fix is usually re-setting the post or re-grading the track area, not replacing the opener again. Call (877) 610-2993 and we’ll put eyes on it.
When the leaves are closed but un-latched and a strong gust hits the face, the leaf slams into the end stop. That impact transfers straight back through the rail into the hinge post. Over time, the weld at the hinge plate cracks, the post begins to lean, and the gate sags. It looks like a bent gate, but the real problem is the post seating and the stress it’s been carrying. We re-weld the plate, set the post properly, and add reinforcement so the next wind season doesn’t undo the work. Call (877) 610-2993 if your gate’s been slammed one too many times.
Almost always, yes. We stage the repair so one leaf stays operational while we work on the other, or we temporarily re-hang the gate on a temp post if the old one has to come out entirely. On a shared driveway gate, we know neither household can lose access for a day. We’ll tell you up front what the plan is so both sides know when the gate will be operational again. Call (877) 610-2993 to schedule a walk-through.
Usually not. It’s more likely debris and grit from Alamo’s gravel drives packed into the rack teeth after runoff washed it down. The rack itself may still be fine. That said, if the gate has been pulling against a misaligned post for a while, the rack can wear unevenly and start chewing up the pinion, and that is a welding and realignment job. We’ll clean the rack, check the alignment, and weld a new rack section in if it’s worn. Call (877) 610-2993 for an honest look.
Yes. Any automated gate in California, private estate or commercial, needs UL 325-compliant entrapment protection. That means properly installed and aligned photocells, edge sensors where required, and correct force settings. Our crew checks every entrapment point whenever we weld, re-hang, or re-grade a gate. If we touch it, we make sure it will not hurt someone or an animal. Call (877) 610-2993 if you’re not sure whether your current setup is compliant.
Need gate parts or welding in Alamo? Call (877) 610-2993. Hal will pick up. We’ll give you a straight answer about what needs fixing and a written price before we start. Free estimates, no trip charge in the county, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alamo and the San Ramon Valley since 2001.