Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Alamo
A complete gate installation in Alamo typically runs $4,800 to $18,500 depending on leaf width, operator type, and site conditions like slope and easement access. Most standard driveway gate jobs in the 94507 zip code are scheduled within two weeks of the free measure, and we hold the quoted price before any work begins. Hal Gatewood has worked on Gate Installation across Alamo’s estate lots and equestrian properties long enough to know which hinges, post footings, and operators hold up to Diablo wind and shrink-swell clay. Call (877) 610-2993 and a live person answers, day or night, not a voicemail.
Why Gatewood Fence & Gate Is Alamo’s Preferred Gate Installation Company
Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on the shop, the invoices, and the truck that shows up in your driveway. Alamo homeowners do not call us because we are the cheapest. They call because they can verify our license, drive to a published address, and look Hal in the eye if something is not right. That kind of accountability is hard to fake.
We get called out to Alamo properties for Gate Repair - Alamo after another company installed a gate, the hinges sagged within a year, and now the owner cannot find anyone to pick up the phone. A gate sags in the hinge post, not in the middle. You fix the panel without the post and you will fix it twice. That is how we work. Every job carries the 90-Day Done Right Promise in writing. If it is not done right, we make it right. One call brings Hal back, no runaround.
Response time to Alamo is straightforward for us. Scheduling and dispatch are coordinated from our San Francisco Bay Area office, and crews serve Alamo locally, so we are not driving from three counties away. A live person answers every call, 24 hours a day, 7 days a week. No call center three states over. No chatbot. Hal or his crew shows up in the window we promised.
Our Gate Installation Services in Alamo
Driveway Gate Installation in Alamo
Alamo estate homes along Stone Valley Road and the surrounding hills carry a different gate load than most of Contra Costa County. Long private driveways, equestrian traffic, and the need for a 14 to 16 foot clear opening for a two-horse trailer change the design. We size the post footings for the actual swing radius, not a generic chart. On sloped gravel drives, that usually means digging deeper, setting more concrete, and correcting for shrink-swell clay before the first hinge goes on.
Sliding Gate Installation in Alamo
Sliding gates make sense in Alamo where a swing gate would never fit. On narrow lots, on shared driveway easements, or where the driveway grade climbs steeply away from the road, a slide gate rides a track and keeps the leaf out of a neighbor’s right of way. We install cantilever-style slider systems that do not drag a roller wheel through gravel and mud, and we set the track height for the actual slope that Diablo wind and wet-season runoff impose.
Swing Gate Installation in Alamo
Dual-leaf swing gates are the classic Alamo entry, but they fail fast when the hinge posts are undersized or set too shallow. The dry, hot summers regularly exceed 100°F and the Diablo winds that funnel through the San Ramon Valley in fall twist open-frame wrought iron at the top hinge. We build for that. New post footings, Gate Parts & Welding in Alamo with hinges corrected for plum, and an operator matched to the actual panel weight, not the brochure spec.
Double Gate Installation in Alamo
Double gates on Alamo equestrian properties often pair a wide vehicular leaf with a pedestrian leaf, or two heavy steel leaves covering a 16 foot clear. The operator on a double gate works twice as hard in a valley wind event, so we oversize the motor and set the open and close limits to stop before the panels shake themselves apart. The old LiftMaster or Linear openers from the late 1980s and 1990s that still run on many Alamo estates are at end-of-life. We replace them with hardware that is actually rated for the job.
Pedestrian Gate Installation in Alamo
A walking gate off to the side of a driveway saves the main operator from cycling every time someone checks the mail. On Alamo lots where the main gate is wide enough for a trailer, a properly hung pedestrian gate with a self-closing latch and a strike that survives the summer heat keeps people from climbing through a gap the way kids and dogs inevitably do.
Security Gate Installation in Alamo
Some Alamo properties call for more than a pretty entry. Security gates with mag-locks, keypads, and vehicle detection loops need to work when the power is out and when a Diablo gust slams the leaf against the stop. We install Alamo Gate Access Control alongside the gate work, wired to a backup source where the property demands it. The goal is a gate that closes on its own every time and does not throw a fault at 2 a.m.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Alamo
We install and service operators from FAAC, BFT, Linear, and Viking, along with the other major brands our Alamo customers already own. Hal’s crew is certified on nine gate brands and we stock common parts locally rather than ordering from a warehouse two weeks out. On an older LiftMaster or Linear opener from the 1990s that is still running, we can often rebuild the drive rather than replace it. When the control board is done, we tell you that plainly and quote a new operator before any work starts.
Common Gate Installation Problems We See in Alamo Homes
Alamo’s terrain and weather produce the same failures year after year. Here is what we find under the panels:
- Post footings poured too shallow: Alamo’s shrink-swell clay heaves with every wet winter and bakes dry every summer. A swing gate on a graded gravel drive drags at the low corner because the hinge post footing was poured for a flat suburban lot. The opener strains within a season, and then it dies.
- Gate leaf crossing a shared easement: On canyon and hillside parcels with recorded easements, a swing gate can arc past the property line and block a neighbor’s access or clip their parked car. That forces a field modification to a slide gate, which costs more after the fact than designing it correctly the first time.
- Diablo wind load on ornamental panels: A strong offshore gust catches an open-frame wrought iron panel and twists it at the top hinge. The operator binds, faults out, and the gate never closes. We brace the top rail and add stiffeners on windward-facing entries.
- Operator sized for the gate, not the site: A two-horse trailer needs a 14 to 16 foot clear, which means two heavy leaves. A light-duty operator rated for a smaller panel will burn through its gearbox on an Alamo equestrian driveway. We match the motor to the true panel weight and the grade.
Pricing for Gate Installation in Alamo, CA
In Alamo, a new single swing gate with operator typically runs $4,800 to $8,500. A dual-leaf swing gate sized for a 16 foot clear runs $9,000 to $18,500, depending on panel weight, operator choice, and access control. A sliding gate on a sloped entry off Stone Valley Road generally lands between $6,500 and $14,000 because the track, foundation, and motor must handle the grade. A pedestrian gate runs $900 to $2,800 installed.
What moves the price in Alamo specifically? Slope corrections, deeper footings for clay soil, easement planning, and wiring runs from the house to a gate 200 feet down the drive. You get a written price before any work starts, and that is the price you pay. Estimates are free. We offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your gate in the 94507.
We Also Serve Cities Near Alamo
Gatewood Fence & Gate serves Alamo and the surrounding Contra Costa communities. If you live in Saranap, Moraga, Walnut Creek, or Danville, the same crew is close by and the same Gate Installation standards apply. The terrain changes from town to town, but our approach does not: a real person answers, the price is written, and the work is done right the first time.
Serving Alamo, CA - Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Alamo
No. A gate leaf that swings past your property line and over a recorded easement opens you to a dispute and a rework bill. Many Alamo canyon and hillside parcels have shared driveways with rights of way, and the gate geometry has to respect that legal boundary at full arc. We plan the swing radius before any concrete goes in, and if a swing gate cannot clear the easement, we configure a slide gate that keeps the leaf entirely on your parcel. Call (877) 610-2993 and we will check your site plan with you, free.
Because the track was set level with the driveway instead of following the grade, or the roller trucks were not sized for the panel weight. On an Alamo slope, a slide gate rides a cantilever or top-supported system, not a bottom roller scraping gravel. We set the track and truck width for the actual grade and wet-season runoff. If your gate is jumping, call us before the panel comes off entirely. The estimate to fix it is free.
Yes, but the hinge post placement has to be exact. On a narrow Alamo lot with a walk gate beside the driveway, a 14 foot swing leaf needs enough flat landing that the panel does not clip the pedestrian path at full arc. We measure the true swing radius on site, not on paper, and set the post so the leaf stops short of the walkway. The quote you get is the price you pay before work begins.
Yes, regardless of power source. UL 325 entrapment protection is required on any automated vehicular gate, solar or wired, and on an Alamo equestrian driveway it is not optional. The panel that closes on a two-horse trailer halfway through the opening is a serious hazard. We install photocells and a reversing edge on every opener we set, solar included, and test them under load before we leave. A trained professional should handle the wiring and sensors. Call (877) 610-2993 if your solar opener is reversing on its own or missing safety eyes.
Yes, if the keypad is rated for direct sun and mounted where the afternoon heat does not sit against the circuit board. Alamo summers regularly pass 100°F, and a black iron gate absorbs heat that shortens the life of a cheap keypad in one season. We mount keypads with standoff brackets so air moves behind the housing, and we wire them to a control board shielded from direct exposure. The keypad on a dark gate in Alamo needs to be commercial grade, not the one from the home center.
If your gate is sagging, jumping the track, or just dead on a sloped driveway off Stone Valley Road, call (877) 610-2993. Hal Gatewood or his crew will come out, measure the site, and hand you a written price before any work starts. Free estimates, no trip charge inside the county, and the 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Alamo since 2001.