Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across White House
Gate motor and opener service in White House, TN typically runs $275-$540 for a repair and $1,200-$2,800 for a full motor installation, depending on gate type and what’s actually failed. We’re Gatewood Fence & Gate, and we’ve worked White House long enough to know that the 2000s-era subdivisions here have their own failure patterns. Hal Gatewood has been at this since 2001, and the first thing we’ll do is diagnose the real problem, not sell you a motor you don’t need. Call (877) 610-2993 and a live person answers.
Why Gatewood Fence & Gate Is White House’s Preferred Gate Motor & Opener Company
We answer our own phone. That’s not a marketing line. When you call (877) 610-2993, Hal or someone on his crew picks up, at any hour. You’re not routed through a queue to a person reading a script in another state. Hal’s name is on the shop, his address is published, and his license number is on every invoice. The name is on the shop, and the shop is down the road, that is the oldest accountability there is.
White House homeowners see us at the hardware store, at the grocery, at the Ridgetop ballfields. We live in the same region and drive the same I-65 corridor traffic. That means we don’t quote one price on the phone and show up to find excuses to charge more. Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings Hal back. No runaround.
We bring a repair-first mindset to every gate motor job. Plenty of companies see a dead control board and quote a full operator replacement. We look at the board, the hinges, the post, the wiring, the rack. We weld on site so your gate stays in your driveway. We’ve been known to fix a gate in front of a White House HOA the same afternoon another company wanted to haul it off and replace it for three times the price.
Serving White House means knowing which neighborhoods were built with which builder-spec openers. More on that below, because it matters more than you’d think. For fast, straight answers from a local owner-operator, call (877) 610-2993.
Our Gate Motor & Opener Services in White House
Motor Repair
Most White House gate motor problems are not “the motor is dead” problems. They’re sagging hinge posts, spent control boards, stripped gear racks, or wiring that’s been getting wet for eight winters. We diagnose the actual failure and fix that. Hal will tell you plainly if the motor itself is fine and the real cost is a $40 hinge plate and a post re-set. Show me the gate closing on its own and I’ll show you where it’s failing.
We keep replacement control boards in the truck for the mid-2000s LiftMaster and Ghost Controls units common in White House’s HOA subdivisions. That means less waiting on parts and more same-day finishes. Our Gate Motor & Opener work is the backbone of what we do, and we stand behind every repair with the 90-Day Done Right Promise.
Motor Installation
New motor installation in White House runs $1,200-$2,800 for most residential swing and slide gates. That includes the opener, necessary hardware, setup of the safety edges, and testing. We install, wire, and set limits properly, and if we’re adding an automatic operator to a gate that previously opened by hand, we make sure the gate itself is worth automating. A gate sagging in the hinge post will eat a new motor. Fix the panel without the post and you’ll fix it twice.
We don’t rush installations. A full motor install is measured, ordered, and scheduled. We’ll come out free, give you a written price, and tell you honestly whether you need a full replacement or whether the old motor has another five years in it. Call (877) 610-2993 for a free measure and a written quote.
Linear Motor
Linear arm motors are common on White House driveway swing gates, especially in the brick-front subdivisions along Highway 76 and around the 37188 zip code. We service, repair, and install linear arm openers from Viking, DoorKing, Elite, and more. Typical linear motor repair runs $275-$465 in the White House area. If the arm is bent, the actuator is stripped, or the motor hums but won’t move the gate, we’ll show you the failed part before we touch anything.
Linear arms put significant force through the operator mount and the gate leaf. On White House’s clay soils, post heave can torque that geometry and overload a healthy motor. We check the post and hinge alignment as part of every linear motor service.
Slide Motor
Slide gate motors in White House show up most often on community entrances, rural acreage parcels, and a few longer residential driveways. Slide motor repair runs $325-$640 for most jobs, depending on whether the chain or rack is involved, whether the wheels need service, and whether the control board has failed. Noise is often the first warning sign. A slide gate that growls or jerks is usually telling you the rack and pinion isn’t aligned anymore, and continuing to run it that way chews gears.
We repair slide motors rather than replacing them when the motor itself is sound and the problem is the infrastructure around it. If the rack is worn beyond safe alignment, we’ll say so plainly and show you the wear pattern. White House’s freeze-thaw clay heave is a real cause of slide gate drift and misaligned racks, and we set gates to run true on the actual track you have, not the one the manufacturer assumes you have.
Battery Backup
White House sits on the Highland Rim. Ice events happen. When power drops, a gated driveway without battery backup becomes a locked driveway, and that’s bad. We install battery backup on new and existing gate motors so you can still open and close during a blackout. Battery backup for a residential swing gate typically runs $180-$350 installed, depending on the motor and enclosure. We also replace spent batteries in solar systems on the rural fringe of 37188.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in White House
We service nine major gate motor brands, and for White House work we keep parts stocked for the ones that actually show up most in this area. Viking, Ghost Controls, DoorKing, Elite, and LiftMaster account for the bulk of what we see in the subdivisions and on the acreage parcels outside town. Ghost Controls and LiftMaster in particular show up over and over in homes built between 2003 and 2011. We don’t have to order a board and make you wait a week if we already know which board your street’s era of opener uses.
If you have a brand we don’t stock parts for on the truck, we’ll order exactly what you need and give you an honest timeline. No one wants a gate stuck open for five business days. Call (877) 610-2993 and we’ll tell you straight what we can do today.
Common Gate Motor & Opener Problems We See in White House Homes
- Neighborhood-wide control board failures. White House’s 2000s-2010s HOA subdivisions were built so rapidly that entire streets share the same builder-spec swing-gate opener. When that model’s control board starts dying from age, we see three, four, five homes in the same subdivision fail within the same season. We stock the boards. That’s how you get a same-week repair instead of a parts delay.
- Clay-soil post heave busting gate geometry. Robertson and Sumner counties sit on heavy clay, and freeze-thaw cycles heave hinge posts out of plumb. A gate post moves a half inch, the gate leaf sags, and suddenly the motor is fighting gravity. The motor strains, gears strip, boards overheat. We re-set and reinforce the footings so the new motor doesn’t inherit an old problem.
- Solar opener underperformance in winter. On the rural fringe of ZIP 37188, older acreage parcels still run solar gate openers. Winter daylight hours on the Highland Rim are short, and panels collect less than the system wants. The battery shows charged but the gate still creeps. Often the panel is undersized or the battery is at the end of its life and can’t hold a load under cold load. We sort out which one it is.
- Non-compliant operators without entrapment protection. Gates installed before modern safety standards were enforced often lack the UL 325 entrapment protection current code expects. When those older motors fail, we explain what’s required and retrofit what can be retrofitted. Post-2016 safety standards are not a suggestion; a moving gate that doesn’t reverse on obstruction is dangerous.
Pricing for Gate Motor & Opener in White House, TN
Here’s what we charge in White House. Motor repair ranges $275-$540. A linear motor repair is $275-$465. Slide motor repair runs $325-$640. Full motor installation lands between $1,200 and $2,800 for most residential gates. Battery backup installation is $180-$350. Every price is quoted and agreed before we start. You’ll know the number before we turn a wrench, and that number doesn’t move unless we find something genuinely unexpected and you approve it first. No trip charge inside the county. That matters when you live on the Sumner side of 37188 as much as the Robertson side.
We also keep our standing offers: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Free estimates always. Call (877) 610-2993 and you won’t get a call-center quote with fine print. You’ll get a real number from a person who’s seen your kind of gate before.
We Also Serve Cities Near White House
We work throughout the corridor between Nashville and the Kentucky line. If you’re in Greenbrier, Millersville, Goodlettsville, or Hendersonville, you’re in our service area too. White House is right in the middle of it, and we’re on these roads all week. Call (877) 610-2993 and we’ll get you scheduled whether you’re off Pleasant Grove Road or up toward Millersville.
Serving White House, TN - Our Local Coverage Area
We’re based in the White House area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in White House
Because your entire street likely got the identical builder-spec swing-gate opener installed in the same year or two. White House’s 2000s-era subdivisions were built by a few large builders who used the same opener on every house. Control boards from that era age on the same timeline. So when one dies, its neighbors are usually not far behind. We stock the boards for those mid-2000s LiftMaster and Ghost Controls units specifically so a cluster of failures doesn’t mean a cluster of week-long waits. Call (877) 610-2993 and tell us what brand your neighbors have; we’ll probably know the board before we pull in the driveway.
Usually not by itself. White House’s clay soil heaves with freeze-thaw cycles, and the post moves. Once the post leans, the gate leaf sags. The motor then has to work against that sag, and it burns out or strips gears as a result. The real repair is re-setting the post and getting the gate geometry back. In many cases the motor can still be saved if it hasn’t already stripped. We’ll tell you which one it is before quoting. Call (877) 610-2993 for a straight answer.
Yes, when we touch the operator, the gate needs to meet the current UL 325 entrapment protection requirements. That means working photo eyes, proper safety edges, and correct force and sensitivity settings. Many pre-2016 gates don’t have these. We can retrofit most existing gates without replacing the whole operator. But we won’t leave a gate running without the safety equipment current code requires. That’s not a markup, it’s the law and it’s basic safety. Call (877) 610-2993 if you want to know what your gate needs.
Sometimes, but not if you wait too long. A slide gate motor that growls or jerks is usually fighting a misaligned rack or worn rollers. The motor may still be fine. If you keep running it, the gear train takes the pounding and eventually the motor is no longer fine. We can often fix the alignment and keep the motor. If you run it until it locks up, you’re buying a full replacement. Noise is the gate telling you something. Address it early and you spend less. Call (877) 610-2993 and we’ll come listen to it.
Winter daylight on the Highland Rim is short, and your solar panel is probably undersized for what the gate draws in cold weather. Also, a battery that’s three or four years old often shows a full charge but can’t deliver enough cold-cranking amps to run the motor under load. The panel, the battery, or both need attention. We service solar gate openers on the rural fringe of White House’s 37188 regularly. Call (877) 610-2993 and we’ll test the whole system, not just swap the battery and hope.
Contact Gatewood Fence & Gate in White House
We’re a phone call away, and a live person answers. 24 hours a day, 7 days a week. If you need a gate motor repair in White House, an honest install quote, or a second opinion on an estimate someone else gave you, call (877) 610-2993 now. Estimates are free. The 90-Day Done Right Promise comes in writing on every job. And Hal’s name is on the shop, not just the side of a franchise van. Call (877) 610-2993 and talk to a person who knows gates and knows White House.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving White House and the surrounding Tennessee corridor since 2001.