Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Timberwood Park
Gate motor repair in Timberwood Park usually runs $240 to $480, and a full motor and opener installation on a welded custom gate typically lands between $1,800 and $3,400 depending on the operator and post work. Most jobs are completed the same day the rig shows up, with limestone drilling and the HOA approval already under control. If your swing gate is reversing in the wind or your slide gate won’t move at all, call (877) 610-2993 and you’ll get Hal or someone on his crew, not a phone tree.
We work Timberwood Park hard because it’s not like flat San Antonio. It sits on the Balcones Escarpment where shallow caliche and fractured Edwards limestone require rotary-hammer drilling for gate post footings. A flat-terrain contractor is rarely equipped for that. So every new motor installation or hinge post replacement here starts with rock drilling, not just digging. That local knowledge is what separates us from someone who drives up from the basin and treats this like any other job. We know the wind off the escarpment throws swing gates off their travel limits. We know the Ashe juniper drops enough bark and twigs every winter to choke a slide track. We plan for it.
If you need Gate Motor & Opener work done, call us. We answer around the clock.
Why Gatewood Fence & Gate Is Timberwood Park’s Preferred Gate Motor & Opener Company
I’m Hal Gatewood. The name is on the shop, and the shop is down the road. I started in 2001 because I kept seeing gates fixed wrong, sagging in the hinge post while someone had already replaced the motor once or twice. A gate sags in the hinge post, not in the middle, and that is where we start. Timberwood Park homeowners have come to expect that. If we can’t find the failure we’ll say so, not pad the bill anyway.
We’re not a dispatch board. A live person answers the phone 24/7, including during the winter wind season when your swing gate operator fails at 9pm and your HOA wants the fence line secure again. In Timberwood Park, that matters. The whole community is deed-restricted and gated in degrees, and a down gate on a long driveway off Borgfeld Road isn’t something you leave until Monday. We treat it the same way you do.
We know Timberwood Park’s HOA review process. We know the architectural committee wants gate style, height, finish, and operator type in writing before a motor gets bolted on. We help you put that package together so the work doesn’t stall. That has built our reputation here. We’re not the cheapest. We are the ones who show up, do the job in the driveway, and write the 90-Day Done Right Promise on every invoice. If it’s not done right, we make it right. One call brings me back.
Our Gate Motor & Opener Services in Timberwood Park
Gate Motor Installation
New motor installation in Timberwood Park starts with the post, not the motor. The limestone and caliche here don’t forgive a sloppy footing. We rotary-hammer the post hole, set the post in concrete, and only then mount the operator. Installed motors range from $1,800 to $3,400 including the operator, wiring, and limit setup on a typical 8 to 14 foot driver gate. We also handle the low-voltage run from your panel to the motor, which on a half-acre or multi-acre Timberwood Park lot is often longer than the city standard.
Gate Motor Repair
If the motor hums and the gate doesn’t move, or the gate reverses halfway and stops, call before you keep pressing the remote. Most Timberwood Park repairs fall between $240 and $480, with the common failures being limit switches, capacitor burnout, or a dead control board. We repair what we can on site. We don’t haul the board out and tell you to replace a good motor. Fix the panel without the post and you’ll fix it twice. Fix the post and the motor will stop working against itself.
Linear Motor Service
Linear slide and swing operators show up on a lot of the half-acre lots here, especially where the driveway is long enough that a standard-duty swing arm would wear itself out. Linear openers with worn gear trains or tired capacitors are services we handle weekly in Timberwood Park. We stock the common Linear boards and limit assemblies on the service rig, so a repair off Bulverde Road doesn’t mean waiting a week for a drop ship. If the motor is beyond saving, we’ll give you the price for a new Linear before touching anything. You agree to the number before the work starts.
Slide Motor Installation and Service
Slide gates in Timberwood Park take more abuse than almost any other style because of the cedar debris season. Ashe juniper bark strips wedge into the bottom track, bind the rack and pinion, and overload the motor until it fails. We install slide motors with proper track clearance and photo-eye placement, accounting for the live oak and cedar elm canopy line, so you aren’t out there clearing jams every January. On a new slide operator installation we also wire safety edges and external loops where the HOA or county requires them. Plan on $2,000 to $3,800 depending on gate length, post condition, and loop cutting. Limestone driveways mean asphalt and concrete cutting for loops is slower here than in town.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Timberwood Park
We’re certified to service nine major gate brands, including the ones you see most around Timberwood Park: DoorKing, Linear, and Ghost Controls. DoorKing slide operators from the 1990s are still running on a lot of these lots, and when they fail it’s usually the rack and pinion or a relay board. We keep parts on the truck for those older units because Timberwood Park has so many of them. Ghost Controls kits show up on smaller decorative drive gates, and their solar combos work well here except during the cedar drop when the panels get coated. We service Viking and LiftMaster too. If your board says something different, call and ask. We’ll tell you straight if it’s worth fixing.
Common Gate Motor & Opener Problems We See in Timberwood Park Homes
- Swing gates reversing in winter wind. Sustained Hill Country wind gusts throw swing gates off their travel limits, so the operator keeps reversing or burns out the limit switches. We recalibrate the limits and often add a mechanical stop or wind brace so the motor isn’t fighting the wind every evening.
- Slide gates jamming on cedar debris. Mountain cedar bark strips and small twigs wedge into the bottom track from December through February. The rack and pinion binds, the motor runs hot, and eventually the capacitor or the gearbox fails. We clear the track, realign the sensors, and set the torque limit right so the motor stops before it destroys itself.
- Rust at the hinge post weld joints. The 1990s wrought-iron and tubular-steel gates around Timberwood Park are now aging into rust at the bottom hinge weld. The post starts to lean, and the swing operator strains against misalignment until it overheats. We weld on site, straighten the post, and rehang the gate so the motor runs square again.
- Photo-eye faults from canopy debris. Live oak and cedar elm drop leaves and twigs across the photo-eye beam year-round. A blocked beam makes the gate stop and reverse for no reason you can see. We reposition the sensors off the canopy drop line and set them so wind-blown debris doesn’t trip them every afternoon.
Pricing for Gate Motor & Opener in Timberwood Park, TX
A gate motor repair in Timberwood Park typically runs $240 to $480. A new slide or swing operator installed on an existing post runs $1,600 to $2,800. A full installation with new post footings drilled into limestone, safety edges, and a battery backup runs $2,800 to $4,200. If we have to core-drill new footings into Edwards limestone, that adds $300 to $600 per post depending on depth and rock condition. Every quote is written and agreed to before any work begins. You won’t see a different number at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate. Seniors and veterans save 10% off the entire invoice, every time.
Call (877) 610-2993 for a free estimate. We’ll come measure, check the HOA requirements, and hand you a written price on the spot.
We Also Serve Cities Near Timberwood Park
Our Gate Motor & Opener in Timberwood Park team also covers Fair Oaks Ranch, Live Oak, Boerne, and Windcrest. Same owners, same crews, same 90-Day Done Right Promise. If your gate is acting up in any of those communities, the phone number is the same: (877) 610-2993.
Serving Timberwood Park, TX - Our Local Coverage Area
We’re based in the Timberwood Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Timberwood Park
Yes. Timberwood Park is a deed-restricted community, and most gate changes require architectural review committee approval, especially if the motor changes the gate’s appearance, height, finish, or automation method. A direct motor-for-motor swap in the same housing often doesn’t require resubmission, but any visible change to the gate or posts does. We can help you put together the drawings, spec sheet, and finish details the committee wants to see. That’s part of why Timberwood Park homeowners use us: we know the HOA approval path so the install doesn’t stall. Call (877) 610-2993 and we’ll walk you through what your project will need.
Timberwood Park sits on the Balcones Escarpment where sustained Hill Country winds hit gate panels directly and push them past the operator’s set travel limits, causing a reverse cycle or a limit switch failure. We fix this by re-setting the limits, adding a wind brace or mechanical stop, and sometimes changing the operator’s obstruction sensitivity settings. The repair usually runs $240 to $480. If it’s happening every windy evening, the motor is working against itself and will burn out. Call (877) 610-2993 before you lose the gate entirely.
Mountain cedar in Timberwood Park drops bark strips and twigs in volume every pollination season, and those pieces wedge into slide-gate bottom tracks, bind the rack and pinion, and overload the motor. We clear the track, blow out the gear rack, realign the photo-eyes, and reset the torque limit so the motor stops instead of cooking itself. An annual winter service call runs about $180 and is worth it. We also reposition sensors and add canopy clearance so the live oak and cedar elm debris doesn’t block the beam year-round. For an exact quote and a clean track through cedar season, call (877) 610-2993.
Yes, but it requires core drilling with a diamond bit and setting anchors with epoxy designed for fractured Edwards limestone, not just drilling hammer holes into it. We do this on Timberwood Park jobs regularly. A standard post can usually take a plate-mounted swing operator. If the post is soft or already spalled, we recommend replacing it before the motor goes on, and the new footing gets core-drilled into the limestone so the post won’t move. Call (877) 610-2993 and we’ll look at your post before quoting the install.
It’s usually the hinge post. A 1990s wrought-iron gate in Timberwood Park sags at the rusted weld joint where the hinge meets the post, not in the motor. The motor struggles against the misalignment, overheats, and fails. We weld on site, straighten the post, and reset the operator so it runs square. If the post is too far gone, we core-drill a new footing into the limestone and set a new post. The motor repair itself is the cheap part. Don’t replace the motor until the post is right. Call (877) 610-2993 for a straight answer on which one is failing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Timberwood Park and the surrounding Hill Country since 2001.