Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Timberwood Park
Gate installation in Timberwood Park starts with a simple question: what’s under the ground? Most of the Hill Country fringe sits on shallow caliche over fractured Edwards limestone, which means your post footings aren’t going into workable soil. They’re going into rock. We run rock augers and epoxy anchor systems on nearly every Timberwood Park install, because a post set the lazy way shifts within a year and throws the whole gate off its travel. If you’re on a half-acre to multi-acre wooded lot off Borgfeld Road or along the east side near the HOA greenbelt, call (877) 610-2993 and we’ll come measure the span, check the grade, and give you a written price before anything gets ordered.
Why Gatewood Fence & Gate Is Timberwood Park’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop, and the shop is down the road. That’s the oldest accountability there is. We’ve been owner-operated since 2001, and when you call, a live person answers. Not a voicemail, not a queue. You’ll talk to someone who knows what a cantilever roller is and why your swing gate drifts after a Hill Country windstorm.
Timberwood Park customers call us because we weld on site. When an original 1990s wrought-iron gate off a custom home on a wooded cul-de-sac has a rusted hinge weld, we don’t haul the panel to some shop across town. We fix it in your driveway. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
Our crew serves Timberwood Park from the San Antonio office, so scheduling is fast and we’re familiar with the terrain, the deed restrictions, and the way the mountain cedar drops debris into every slide track come December. Background-checked, uniformed people on every job. You’ll see the same face at the hardware store.
Our Gate Installation Services in Timberwood Park
Sliding Gate Installation
Most Timberwood Park properties with long private driveways use sliding gates, and for good reason. They don’t need swing clearance, they handle wide spans, and they hold up to the Balcones Escarpment wind that funnels through the hills. But a slide gate is only as good as its bottom track, and Ashe juniper bark will foul that track every single winter. We set the posts deep into limestone with rock augers, weld the rack and pinion true, and build the gate to shed debris rather than collect it. Expect a 12 to 16-foot sliding gate install in Timberwood Park to run $4,200 to $7,800 depending on span, operator, and whether we’re drilling through caliche or fractured rock.
Swing Gate Installation
Double swing gates are common on the wider entrances off Timberwood Park’s larger acreage lots. The challenge here isn’t the gate itself, it’s the hinge posts. Set them in shallow caliche and the wind will work them loose within a season. We drill deeper, use epoxy anchors where the rock fractures, and size the operator to the gate’s full square footage. Nothing worse than an undersized opener straining against a 14-foot panel in a March windstorm. A typical Timberwood Park double swing gate install runs $5,500 to $9,000 with operator.
Pedestrian Gate Installation
On multi-acre Timberwood Park lots, a separate pedestrian gate next to the driveway saves you from cycling the big gate every time someone walks out to the mailbox or down to the deer feeder. We build them to match the driveway gate, set the post properly, and often run a keypad or card reader that ties into the same access control as the main gate. Most pedestrian gates in Timberwood Park run $1,100 to $2,400 installed.
Solar Gate Opener Installation
A lot of Timberwood Park gate lines sit a long way from mains power. Running conduit from the house to the gate on a half-acre lot can cost more than the gate itself. Solar changes that equation. We size the panel and battery to the gate’s real square footage and the overcast stretch we get in January and February. Undersize it and you’ll be inside the gate when the battery dies on a cloudy week. A proper solar opener install, panel and battery included, runs $1,800 to $3,200 on top of the gate itself. That’s a real committed Gate Installation job, not a weekend add-on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Timberwood Park
We’re certified to service nine major gate brands, and for Timberwood Park work we keep parts on hand for the ones we see most: LiftMaster, Linear, Viking, Ghost Controls, and DoorKing. A LiftMaster slide operator on a solar array is a common Timberwood Park setup, and when the controller board fails after a lightning strike out here, waiting a week on parts isn’t acceptable. We stock what the local installs actually use. If you’re in Timberwood Park and your opener is from an era before you moved in, we’ll tell you straight whether it’s worth rebuilding or time to replace.
Common Gate Installation Problems We See in Timberwood Park Homes
Most of the gates and automation around Timberwood Park were installed when the homes were built, from the mid-1980s through the 2000s. That installed base is aging, and the failures follow a pattern. Fix the panel without the post and you’ll fix it twice.
- Post footings set in shallow caliche. A contractor who doesn’t own a rock auger will dig down the easy six inches, set the post, and call it done. Within a year, the wind has levered the post off plumb and the gate sags in the hinge post. Not in the middle. In the post. That’s where we start every Timberwood Park install.
- Solar operators sized by price, not square footage. We see this constantly on the wider farm gates off multi-acre lots. The panel can’t recharge the battery during a cloudy Hill Country winter, and the gate fails shut on the one morning you need to leave early. We calculate the draw and size the system to the gate, not to a quoted number.
- Slide gate tracks filled with Ashe juniper bark. Mountain cedar sheds bark strips and small twigs in volume every December through February. That debris wedges into the bottom track, the rack binds, and the operator motor burns out trying to push through it. We build Timberwood Park slide gates with track clearances and debris shields that minimize this from day one.
- Wind-driven travel limit drift on swing gates. Sustained gusts off the Balcones Escarpment push swing gates past their limit switches, then the auto-reverse kicks in and the gate never closes fully. We set limits with margin for wind load and use operators that re-learn their travel on each cycle.
Pricing for Gate Installation in Timberwood Park, TX
Here are straight numbers for Timberwood Park, not a range you’ll see on a national site. A single swing gate with opener runs $3,400 to $5,600. A double swing gate runs $5,500 to $9,000. A sliding gate spans $4,200 to $7,800 for a 12 to 16-foot panel. Pedestrian gates run $1,100 to $2,400. Solar add-ons run $1,800 to $3,200. Post drilling into caliche or fractured limestone adds $400 to $900 depending on depth and rock condition, and on Timberwood Park lots we almost always need it. Every price is quoted and agreed in writing before any work starts. No trip charge inside the county. Seniors and veterans get 10% off, permanently. Call (877) 610-2993 for a free measure and exact quote.
We Also Serve Cities Near Timberwood Park
Our crew works the whole north Hill Country corridor. We handle gate installation in Fair Oaks Ranch, Live Oak, Boerne, and Windcrest, and the same 90-Day Done Right Promise applies on every job. Same rock conditions, same wind patterns, same standard of work. Scheduling is handled from the San Antonio office and we route calls from the whole area around the clock.
Serving Timberwood Park, TX - Our Local Coverage Area
We’re based in the Timberwood Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Timberwood Park
For a standard Timberwood Park gate post, we drill 36 to 42 inches deep, and when we hit fractured Edwards limestone we go deeper and set the post in epoxy anchor grout. The rule is simple: deeper than the frost line doesn’t matter here, deeper than the rock fracture does. A post set short in caliche will shift under wind load within a year. Call (877) 610-2993 and we’ll tell you exactly what your site needs after we drill a test hole.
Yes, and on a lot of Timberwood Park properties solar is the only practical option because the gate line sits too far from the house for a cost-effective mains run. The catch is sizing. A double swing gate with two 14-foot panels needs a bigger panel and battery bank than a single driveway gate, and you need enough storage for the overcast stretch we get in January. We size the system to the gate’s actual square footage and the local sun pattern. Call for a free site assessment and we’ll spec the right panel and battery for your gate.
Timberwood Park sits on the Balcones Escarpment, and the wind that funnels through these hills pushes swing gates past their limit switches on a regular basis. When the gate drifts past the limit, the auto-reverse reads it as an obstruction and the gate won’t close. Fix the post without the limit reset and you’ll be back out there after every storm. We set travel limits with wind margin and use operators that re-learn travel on each cycle. Call (877) 610-2993 and we’ll dial it in.
Most Timberwood Park HOAs don’t strictly require a separate pedestrian gate, but the deed restrictions do require that any gate match the community’s Hill Country aesthetic. Practically, a separate pedestrian gate keeps you from cycling the big driveway gate every time someone walks out for mail or a package. We build them to match the main gate and tie both into the same access control. The HOA will care about the look, not the hinge count.
We build the clearance into the gate from the start. Ashe juniper, what locals call mountain cedar, sheds bark strips and small twigs heavily every winter during pollination season. That debris wedges into slide gate bottom tracks and blocks photo-eye beams. On Timberwood Park installs we set the track with extra clearance, add debris shields where the gate passes through the juniper line, and recommend a twice-yearly track cleaning. A gate that clears its own track is a gate that doesn’t burn out an operator motor in December.
Get a Free Measure and a Written Price
If you need gate installation in Timberwood Park, call (877) 610-2993. A live person answers, 24/7. We’ll come out, look at your grade, drill a test hole if we need to, and hand you a written price that won’t change when the truck pulls up. The name is on the shop. Hal’s been doing this since 2001. You’ll see him again at the hardware store, and that’s exactly how it should be.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate. Hal has been building, welding, and repairing gates since 2001 and serves Timberwood Park from the company’s San Antonio office.