Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tampa, FL
Gate repair in Tampa comes down to two forces that never let up: lightning and salt air. Most repair jobs run between $125 and $600 depending on what actually failed, and the price gets set before we touch a wrench. If your gate is sagging, grinding, or dead after last night’s storm, call (877) 610-2993 and you’ll get a live person who knows this city’s gates.
Why Tampa Homes Are Different
Tampa is the self-proclaimed Lightning Capital of the U.S., and the afternoon thunderstorms from June through September send power surges through gate systems with almost metronomic predictability. A nearby strike doesn’t have to hit your gate. It just has to spike the line, and the control board takes the hit. We stock replacement LiftMaster and Viking boards on the truck as consumable items, not because they wear out, but because summer lightning blows them out so regularly.
Then there’s the bay. Salt-laden air off Tampa Bay corrodes iron hardware at a rate you won’t see 60 miles inland in Orlando. On Davis Islands and Harbour Island, hinges, pivot pins, and bottom-rail welds rust through in a fraction of the time. Every iron gate near the water gets a bottom-rail inspection first, because ground-level salt moisture attacks welds there before anywhere else on the frame. Gate repair in Tampa is a two-front battle: surge electronics and salt corrosion, often on the same job.
Gate Repair in Tampa
Gate repair in Tampa most often comes down to two things: a control board that got fried by a summer lightning strike, or a hinge post that salt air has been quietly eating away for years. Most repair calls we run across Tampa are done the same day, and the price gets set before we touch a wrench. If your gate is sagging, grinding, or just not opening, call (877) 610-2993 and you’ll get a live person who knows the difference between a board problem and a post problem.
Electric Gate Repair
Electric gate repair in Tampa is half mechanical work and half weather investigation. A gate that opens fine most of the time but dies after an afternoon thunderstorm is not having a bad day. It’s sending you a signal. We trace the problem from the board to the motor to the loop detector, and we check for surge damage even when the homeowner thinks it’s just a bad remote. A control board replacement for a LiftMaster or Viking operator runs $180 to $340 for the board and install, depending on the model.
Automatic Gate Repair
Automatic gates in Tampa sit outdoors in salt air and get hammered by near-daily summer thunderstorms. That combination wears out swing arms, spindles, and gearboxes faster than you’d expect. We fix the actual problem, not just the symptom. If your gate is jerking open or grinding on the track, we’ll tell you whether it’s a gearbox, a bearing, or a bent rack, and then we’ll fix it in the driveway. We don’t upsell a new operator when a $40 part and an hour of labor would do. See our full Gate Repair service for details.
Hinge & Post Repair
This is the repair we run most in Tampa’s older neighborhoods. In Hyde Park and Seminole Heights, a lot of driveway gates are original ornamental iron from the 1920s and 1930s, hung on posts that were never engineered for a modern automated operator. The gate sags in the hinge post, not in the middle, and that’s where we start. Hinge and post repair typically runs $250 to $600, depending on whether we need to pour a new footing or just rebuild the post.
Gate Realignment
A gate that drags on the driveway, binds against the latch post, or trips the safety sensor every third cycle is a gate that’s out of plane. In Tampa, realignment often follows a storm. High wind and saturated soil shift posts slightly, and suddenly a gate that worked fine for a decade is fighting itself. A full gate realignment is usually $125 to $300. We level the post, adjust the hinges, and set the gap so the gate clears the ground and the latch catches every time.
Lock Repair & Weld & Rust Repair
Salt air and afternoon storms mean Tampa gates rust from the bottom up. Ground-level salt moisture attacks the bottom rail welds first, before anything else on the frame shows damage. We inspect every iron gate near the bay for what we call “Tampa rust” at the seams, and we weld on site, right in your driveway. Weld and rust repair runs $150 to $450 per section. A gate that some companies would replace because the bottom rail is rusted through is often a one-day weld repair. We’ll tell you honestly which one you’re looking at.
Why does my Tampa gate operator control board keep failing every summer?
Because Tampa is the Lightning Capital of the U.S., and your board is on the receiving end. June through September, afternoon thunderstorms send power surges through the low-voltage wiring of automated gates all over the bay. A nearby strike doesn’t have to hit your gate directly. It just has to spike the line. We replace more LiftMaster and Viking boards in Tampa during June, July, and August than in all other months combined. Call (877) 610-2993 and we’ll add surge protection so the next storm doesn’t repeat the cycle.
Can you repair the original iron gate on my 1920s Hyde Park home?
Yes, and we’d prefer to. Original hand-forged iron gates in Hyde Park and Seminole Heights are built better than most of what’s made today. The usual problem is the hinge post, not the gate itself. A post that’s been sitting in Tampa’s salt air for decades rusts at the soil line, and the gate sags from there. We rebuild the post footing with galvanized steel and weld the hinges back true. Call (877) 610-2993 for a free estimate.
Gate Installation in Tampa
A new driveway gate in Tampa typically runs $2,800-$7,500 installed, depending on whether you’re going with a slide or swing setup, the infill material, and whether we’re automating it. Most jobs take one to three days once materials arrive, and we quote the full price before any cutting or digging starts. If you live anywhere from Seminole Heights down to Davis Islands, call us at (877) 610-2993 and we’ll come measure, look at the ground, and give you a written price.
Driveway Gate Installation
Most Tampa driveways we’re called to are either narrow 1920s-era approaches in the urban core or wider mid-century suburban lots further out. Neither takes a stock kit well. We size posts to the gate weight, not the gate price, and we set footings below the muck layer that sits under a lot of Tampa topsoil. A driveway gate in Tampa typically runs $3,200-$6,800 for a single swing with automation. See our full Gate Installation page for what’s included.
Pedestrian Gate Installation
Side-yard and pool-access pedestrian gates are common across Tampa, especially in neighborhoods where lots are bigger and getting from front to back usually means a gate. Expect $900-$2,400 installed for a standard steel or aluminum pedestrian gate with a self-closing hinge and latch. If it needs a maglock or keypad, we handle that too.
Sliding Gate Installation
Sliding gates fit Tampa lots where a swing gate would eat half the driveway or block the sidewalk. That’s common in East Tampa, where driveways can be short, wide, and graded oddly. A slide gate runs on a track and needs a level rail, so we spend real time on base prep. Installed slide gates in Tampa run $4,500-$9,500 with automation, depending on width and infill.
Swing Gate Installation
Swing gates are the most common install we do in Tampa, especially double gates for wider driveways. The failure point is always the hinge post. Set a post in saturated sandy soil during a June downpour and it’ll lean before the concrete kicks. We auger deeper than the minimum called for, use reinforced posts, and let the footing cure before hanging the leaf. Single swing gates start around $2,800; doubles go up from there.
How do I manually release my gate operator when power goes out during a Tampa thunderstorm?
Open the control box cover, locate the manual release lever or keyed disconnect, and turn it to release the motor from the gate. Then push the gate by hand slowly. Don’t force a slide gate. The rack and pinion will strip if you muscle it. If you’re unsure where the release is, call (877) 610-2993 and we’ll talk you through it on the phone, any hour.
Does a solid aluminum infill gate hold up to wind loads better than wrought iron near Tampa Bay?
Not automatically. Aluminum is lighter and won’t rust, but a solid infill panel catches wind like a sail regardless of material. In exposed bayside spots, the posts, hinges, and post footings carry the load. We size all three for wind shear, not just the gate’s dead weight. Near the bay, aluminum with a quality powder coat usually outlasts iron in salt air.
Gate Motor & Opener in Tampa
When a gate motor dies in Tampa, it’s rarely just a mechanical failure. It’s usually the storm season, the salt air, or both working together. A blown control board after a June thunderstorm is as Tampa as Cuban bread and a 4 PM downpour. If your opener is humming without moving, dead after a storm, or binding after rain, call (877) 610-2993 and talk to a live person who knows what he’s looking at.
Motor Repair
Motor repair in Tampa usually starts with a control board, and the board usually failed because of a power surge. We trace the surge path first, check the loop detector wiring, and replace what’s actually dead. Then we address why it died so the next storm doesn’t kill the new board too. A typical motor repair in Tampa runs $180 to $400 depending on the board and whether we’re adding surge protection. See our Gate Motor & Opener service for details.
Slide Motor
Slide gates on Tampa’s older driveways, especially east of I-275 where you find mid-century concrete block homes with unconventional driveway widths and grades, develop a specific failure: the rack and pinion alignment shifts after saturated ground moves the post footings. The gate stalls mid-travel, or grinds. We realign the rack, reset the posts if the footing has shifted, and weld reinforcement brackets where the operator arm meets the gate. Slide motor replacement in Tampa typically runs $650 to $1,200 installed.
Linear Motor
Linear operators are common in Tampa’s residential swing gates, and they take a beating from bay humidity. The arm seizes, the gear strips, or the motor overheats because the gate is binding against a corroded hinge post. We don’t just swap the motor. We check the post, the hinges, and the gate’s swing path. If the post is rusted through at the bottom rail, the new motor will fail the same way inside two years. Linear motor repair in Tampa runs $250 to $550 on average.
Battery Backup
Flood-prone Tampa neighborhoods, especially the low streets around Egypt Lake-Leto and East Lake-Orient Park, lose power frequently during hurricane season. A battery backup on your slide or swing operator means the gate still opens when the grid is down. We install and service sealed AGM battery systems sized for your operator and your gate’s weight. Battery backup installation in Tampa typically runs $300 to $600 depending on the operator and required amp-hours.
What’s the right battery backup for a slide gate operator in a flood-prone Tampa neighborhood?
You want a sealed AGM deep-cycle battery sized for at least 20 to 30 open-close cycles, paired with a charger that handles the operator’s amp draw. Flood-prone streets around East Lake-Orient Park and Egypt Lake-Leto lose power for hours or days during storms, and a standard gate battery will die quickly. We size the battery to your specific operator. Call (877) 610-2993 for a free assessment.
Why does my swing gate bind only after heavy rain in Tampa?
Heavy rain saturates the soil around the gate posts, the footing shifts a fraction of an inch, and the gate’s arc changes enough that it drags or binds against the operator. Tampa’s afternoon storms can drop two inches of rain in an hour, and saturated ground moves posts. The fix is resetting the post and reinforcing the footing, not forcing the motor. Call (877) 610-2993 and we’ll take a look.
Gate Access Control in Tampa
Gate access control in Tampa means keeping a keypad, remote, phone entry system, or card reader working through lightning season, salt air, and afternoon storms that kill electronics without warning. An access system that dies after a thunderstorm isn’t just an inconvenience. It’s a security hole in your driveway. We’ve been retrofitting access control on older Tampa gates for years, and we answer the phone when you call. That’s (877) 610-2993, and a live person picks up.
Keypad Entry
Keypad entry is the most common retrofit on older Tampa gates, especially the ornamental iron driveway gates in Seminole Heights and Hyde Park. A wired or wireless keypad lets you stop carrying a physical key, and a delivery driver can get in without you walking out to the gate. We install weather-sealed keypads rated for direct Florida sun and rain, tied into your existing operator. A keypad retrofit in Tampa runs $325 to $725 installed. See our Gate Access Control page for more.
Phone Entry
Phone entry systems let your gate dial your cell when someone presses the call button at the driveway. For Tampa homeowners with long driveways or gates set back from the house, this beats a buzzer that nobody can hear. We install and program phone entry modules that work with existing operators, and we make sure the system works during the storms that take out phone lines and cell towers alike. Phone entry hardware in Tampa generally runs $475 to $1,100 installed.
Card Reader
Card readers are the quiet workhorse for small HOAs and multi-home gated entries around Tampa, including communities near Carrollwood and Temple Terrace. One reader can serve family, staff, or a small set of neighbors, and you can add or remove cards without touching the gate. A card reader add-on in Tampa typically costs $400 to $950, with the higher end covering readers that need a separate controller wired to the operator.
Video Intercom
Video intercoms are catching on fast in Tampa, partly because nobody wants to open a gate without seeing who’s there. We install video intercom stations at the gate and monitors or phone apps inside the house, wired through your existing access control or set up as a standalone upgrade. On Davis Islands and Hyde Park properties where the gate is far from the front door, a video intercom saves you a walk to the driveway every single time. Video intercom installation in Tampa runs $950 to $2,400.
Can I add a keypad entry to an old ornamental gate in Seminole Heights?
Yes, and we do it often. A keypad can be retrofitted onto most existing systems as long as the control board has an open relay or an add-on module is available. We’ll also check that the gate itself swings freely and the operator isn’t undersized, because a keypad won’t fix a gate that’s already struggling. Call (877) 610-2993 for a free estimate.
How often should I have my gate access control checked if I live near Tampa Bay?
Twice a year, minimum. Salt air on Davis Islands and Harbour Island attacks bottom-rail welds and hinge pins year-round, and summer lightning stresses control boards every single week. We recommend a spring check before storm season and a fall check after it, to catch surge damage and corrosion before they become a dead gate. Call (877) 610-2993 to schedule one.
Gate Parts & Welding in Tampa
Tampa gate hardware takes a beating that most cities never see. Between the salt air rolling off Tampa Bay and the lightning storms that roll through every summer afternoon, hinges rust through, weld points crack, and control boards fry on a schedule that keeps us busy all year. We fix what’s fixable by welding on site, and we charge an honest price for it. Hal Gatewood has been fixing gates this way since 2001.
Hinge Replacement
Hinges are the first thing to go on a Tampa gate. Salt air works into the pivot point, the grease thins out, and the gate starts dragging on the latch side. We weld new hinges in place, usually the same visit, and we don’t tell you to replace the whole gate because one hinge pin wore out. A typical hinge replacement in Tampa runs $85 to $220 per hinge depending on the size of the gate and the condition of the post. See our Gate Parts & Welding service for details.
Post Replacement
A sagging gate is almost always a post problem. We see it in the older craftsman neighborhoods around Seminole Heights, where the original posts weren’t built to hold a heavy ornamental iron gate. We dig out the old post, set a new steel post in concrete, and weld the gate back to it. In Tampa, replacement posts run $180 to $450 per post, including concrete and re-welding the hinges.
Rail Repair
The bottom rail is where salt moisture gathers on any gate near the water. On Harbour Island and Davis Islands, we routinely see bottom rails rusted through while the top of the gate still looks fine. We cut out the bad section, weld in new steel, and grind it flat so you can’t tell it was ever patched. Rail repair in Tampa typically costs $120 to $300 depending on how much rail needs to be replaced.
Custom Welding
Not every Tampa driveway fits a stock gate. East Tampa has a lot of mid-century concrete block homes with driveway widths that don’t match anything off the shelf. We custom-weld gates to fit those odd dimensions, and we build them with the extra bracing that Tampa’s afternoon storms demand. Custom welding jobs in Tampa usually run $150 to $600 for repairs and modifications.
Do you cover all Tampa neighborhoods?
We work across all of Tampa, including Seminole Heights, Hyde Park, Davis Islands, Harbour Island, East Tampa, and the 33601 through 33625 ZIP codes. We don’t charge a trip fee anywhere inside the county, so your location in Tampa doesn’t change the price. Only the time of day we can get there. Call (877) 610-2993 and we’ll give you an honest window.
What warranty do you offer on gate parts and welding in Tampa?
Every job carries our 90-Day Done Right Promise in writing. If the weld fails, the hinge binds, or the part we installed doesn’t hold up, we come back and make it right at no charge. It’s not “up to 90 days.” It’s 90 days, plain and simple. That applies to every gate parts and welding job we do in Tampa.
Brands We Service in Tampa
We service and stock parts for the major gate brands found across Tampa, including FAAC, BFT, Linear, and Viking, along with LiftMaster, DoorKing, Elite, Mighty Mule, and Ghost Controls. Most common control boards and safety edges are on the truck, so one visit usually gets your gate running again. See our brands page for the full list.
Pricing for Gate Repair in Tampa, FL
Here’s what Tampa homeowners can expect to pay for common gate work. Every job is priced and agreed upon before any work starts, and we honor that number at the door.
| Service | Typical range in Tampa |
|---|---|
| Control board replacement | $180-$340 |
| Hinge replacement (per hinge) | $85-$220 |
| Post replacement (per post) | $180-$450 |
| Rail repair | $120-$300 |
| Weld and rust repair (per section) | $150-$450 |
| Gate realignment | $125-$300 |
| Motor repair | $180-$400 |
| Slide motor replacement | $650-$1,200 |
| Battery backup installation | $300-$600 |
| Keypad entry retrofit | $325-$725 |
| Full gate installation (swing with automation) | $2,800-$7,500 |
What pushes the price up in Tampa is usually salt corrosion that’s been left too long and a post footing that needs re-pouring, not the part itself. Whatever the number is, you’ll see it written down and agreed before we start.
Neighborhoods We Serve in Tampa
We work all over Tampa, from the 33601 ZIP codes up through 33625. Most repair calls get same-day service, and we’ll always give you an honest window when you call. Here’s a sample of where we’re working most weeks:
- Seminole Heights (33603, 33604)
- Hyde Park (33606)
- Davis Islands (33606)
- East Tampa (33610)
- Carrollwood (33624, 33625)
Service Area - Cities Near Tampa
Our crews cover Tampa and the surrounding communities across Hillsborough County. If you’re in Tampa, FL, Egypt Lake-Leto, FL, East Lake-Orient Park, FL, Temple Terrace, FL, Carrollwood, FL, or Lake Magdalene, FL, we’ll come to you.
Serving Tampa, FL - Our Local Coverage Area
Gatewood Fence & Gate crews serve Tampa and the communities around it; dispatch is coordinated from our Miami (South FL) office. The map shows the Tampa coverage area; if your address is on it, we can help.
Also serving nearby: Tampa, FL, Egypt Lake-Leto, FL, East Lake-Orient Park, FL, Temple Terrace, FL, Carrollwood, FL, Lake Magdalene, FL.
FAQs About Gate Repair in Tampa
Most Tampa addresses get same-day service for repairs, and we answer the phone 24/7 with a live person, not a voicemail. Storm season backs up every gate company in the city, so call early if you can. We’ll give you an honest window, and we’ll be there in it. Call (877) 610-2993.
Most gate repairs don’t need a permit. A full gate installation with new footings and automated operators may, depending on your location and the scope of work. We’ll tell you what applies to your project before anything starts, and we handle the paperwork when a permit is needed. Call (877) 610-2993 for specifics on your street.
Yes. We work with HOAs across Tampa, from gated entries in Carrollwood to small multi-home communities near Temple Terrace. We’ll match the existing gate style and hardware where needed, and we can coordinate with your property manager or board. Call (877) 610-2993 and we’ll sort out what your community requires.
If your gate isn’t working right in Tampa, call (877) 610-2993. You’ll reach a live person, get an honest answer, and know the price before anyone gets in a truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tampa Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath