Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Tampa
Gate installation in Tampa, FL is not a one-size-fits-all job, and anyone who tells you otherwise has not spent a summer afternoon here. A new driveway gate in Tampa typically runs $2,800 to $7,500 installed, depending on whether you need a single swing, a double swing, or a sliding gate. That price includes the operator, the posts, and the labor to set everything straight. We schedule most Tampa installations within 5 to 10 business days, and we show up in the window we promise. If you want a straight answer before you spend a dime, call (877) 610-2993 and ask for Hal.
Our Gate Installation team works in Tampa neighborhoods every week. Seminole Heights, Hyde Park, Davis Islands, Carrollwood, East Tampa. We know the streets, the soil, and the storms. That matters more than you might think when a gate has to survive June through September here.
Why Gatewood Fence & Gate Is Tampa’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and his name is still on the door. He answers his own cell. When you call about a gate in Tampa, you are talking to the person who will show up with the welder, not a call center in another state. We have been fixing and installing gates in the Tampa Bay area long enough to know what fails here and why. Most of our Tampa customers find us because a neighbor recommended us, or because a national outfit quoted one price on the phone and a different one at the door. That does not happen here. The price we quote is the price you pay, agreed before any work starts.
Our Tampa customers often mention the same things: the person who showed up was background-checked and in uniform, the work was done on-site instead of hauled away, and the 90-Day Done Right Promise came in writing. That promise is simple. If the gate is not done right, call us and we make it right. No fine print, no runaround. We serve all of Tampa with live phone answering around the clock. You will not get a voicemail at 11 p.m. on a Saturday.
Our Gate Installation Services in Tampa
Driveway Gate Installation
Most Tampa driveway gates are either single swing or sliding, depending on the width of the driveway and the slope. East Tampa mid-century concrete block homes often have driveways with unconventional widths and grades, because they were built before automated gates were common. We measure, we check the grade, and we set posts in concrete deep enough to hold through a summer of saturated ground. A standard single swing driveway gate in Tampa runs $2,800 to $4,500 installed with a quality operator.
Pedestrian Gate Installation
A pedestrian gate next to a driveway gate in Tampa usually runs $900 to $2,200, depending on the ironwork and whether you add a maglock or keypad. In neighborhoods like Hyde Park and Seminole Heights, we install a lot of matching pedestrian gates alongside driveway gates on retrofitted craftsman bungalows. Those homes were never engineered for automated operators, so we often have to reinforce the existing post or set a new one entirely.
Sliding Gate Installation
Sliding gates make sense in Tampa when the driveway is steep or when there is not enough room for a swing arc. They are also the better choice for waterfront properties on Davis Islands, where salt air chews through iron pivot pins faster than anything inland. A sliding gate installation in Tampa typically runs $3,500 to $7,500, and we include the track, the operator, and the safety edges. The price is quoted and agreed before we start.
Swing Gate Installation
Double swing gates are common on Tampa corner lots and wider driveways, and they run $3,000 to $6,800 here depending on whether you choose solid infill panels or open pickets. Solid infill gates catch a lot of wind during afternoon thunderstorms, and that wind load twists the hinge post if the post is undersized or set too shallow. We oversize the hinge post and set it deeper than code minimums, because we have seen what a Tampa storm does to a weakly set gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tampa
We install and service automatic operators from FAAC, BFT, Linear, Viking, and several other major brands, and we keep common parts stocked for Tampa customers. Specifically, we keep replacement FAAC and Viking control boards on the truck, because summer lightning in Tampa blows them out so predictably that we treat them like consumables. There is no better example of why local matters. A fresh control board is not much good if it takes a week to arrive. Ours are here, in Tampa, ready to go.
Common Gate Installation Problems We See in Tampa Homes
Gate installation in Tampa has failure patterns you simply do not see 60 miles inland in Orlando. Here is what we run into most often:
- Wind-twisted hinge posts on solid infill gates. Tampa’s severe thunderstorms drive wind against solid panels like a sail, and the hinge post takes all that force. If the post was not oversized and set deep, the gate starts sagging at the latch within a season. We set our posts for wind load, not just weight.
- Leaning gates from saturated sandy soil. Tampa’s soil drains fast, but the near-daily afternoon downpours from June through September leave the ground waterlogged. Footings that are not deep enough start to shift, and the gate begins to drag. We set post footings deep enough to stay put through the rainy season.
- Salt-air corrosion at the bottom weld. Along Tampa Bay corridors like Davis Islands and Harbour Island, salt-laden air attacks the bottom rail weld first. The rest of the frame can look fine while the hinge post is quietly rusting through. We specify stainless hardware and inspect the bottom rail on every waterfront install.
- Fried control boards after thunderstorms. Tampa is the self-proclaimed Lightning Capital of the U.S., and automated gate operators take direct hits through the power supply. A nearby strike during the June-September storm season can fry a board even if the gate itself is untouched. We install surge-protected operators as standard on every new gate in Tampa, not as an add-on.
Pricing for Gate Installation in Tampa, FL
Gate installation in Tampa is priced by the job, not by a national menu. Here is what you can expect to pay in this market:
- Single swing driveway gate, operator included: $2,800 to $4,500
- Double swing driveway gate, operator included: $3,000 to $6,800
- Sliding gate, operator and track included: $3,500 to $7,500
- Pedestrian gate, with keypad or maglock: $900 to $2,200
- Post replacement or reinforcement, per post: $400 to $900
What changes the price is the width of the gate, the type of infill, the condition of the existing posts, and whether you are on a waterfront lot where we spec stainless hardware. We give you a written quote before any work begins, and that is the price. No surprise at the door. We also offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for a free estimate.
The Tampa Factor: Lightning, Salt Air, and Wind
Tampa is both the self-proclaimed Lightning Capital of the U.S. and a salt-air city wrapped around Tampa Bay. That is a dual threat to automated gates, and it is the single biggest reason you want a local installer who specs for it from day one. Control boards and motor operators are routinely fried by nearby lightning strikes during the June through September storm season. Meanwhile, salt-laden bay air is simultaneously corroding iron hardware and hinges at rates you would not see 60 miles inland in Orlando. Gate installation in Tampa is fundamentally a two-front battle: surge electronics and salt corrosion, often on the same job.
Our installation work here includes specifying surge-protected operators and stainless hardware as standard, not as an upsell. On a Davis Islands waterfront property, we installed a double swing gate with a LiftMaster operator and stainless hinge posts. Within the first June storm season, a nearby lightning strike fried the control board. Our tech, who stocks replacement boards on the truck, had the gate back in service the same afternoon. We added a surge suppressor and inspected the bottom rail for early Tampa rust at the welds, catching corrosion before it reached the hinge post. That is what doing it right in Tampa looks like.
We Also Serve Cities Near Tampa
Beyond Tampa proper, our gate installation crew works regularly in Egypt Lake-Leto, East Lake-Orient Park, Temple Terrace, and Carrollwood. If you are in one of those communities or anywhere else in Hillsborough County, call us and we will schedule a free measure and a written price.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Tampa
Yes. For any solid infill gate larger than a standard single driveway gate, we specify hinge posts and footings sized for wind load, not just gate weight. Tampa’s summer thunderstorms put real force on a solid panel, and a gate that meets minimum code but not storm reality will twist at the hinge post. Call (877) 610-2993 and we will tell you exactly what your gate needs.
Every automatic sliding gate has a manual release, usually a lever or a keyed mechanism on the operator. Turn the operator off at its power switch first, then engage the release so the gate can be pushed by hand. Do not force the gate if it resists, that usually means the chain or track is binding. Gates installed by our crew come with a walkthrough of the release procedure before we leave, and we are a phone call away if you forget during a storm.
Nearby lightning strikes send surges through the power supply, and the control board is the component that absorbs them. This is so common in Tampa that we stock replacement FAAC and Viking boards on the truck and treat them as consumables. We also install surge protection on every new operator so the board does not become the sacrificial part. Call (877) 610-2993 and we can have a board swapped the same afternoon.
Tampa’s sandy soil drains fast but saturates quickly during the daily afternoon downpours. We set gate post footings a minimum of 36 inches deep and often deeper for a double swing gate, with concrete poured below the frost line and around the full post. Anything shallower will start to lean within a couple of rainy seasons. That is not a guess, it is what we have seen on hundreds of Tampa gates.
Yes, and it usually attacks the bottom rail weld first. On waterfront corridors like Davis Islands and Harbour Island, ground-level salt moisture corrodes welds before anywhere else on the frame. We use stainless hinge hardware and inspect the bottom welds on every bay-area install. If you live within a few blocks of the water, tell us when you call so we spec it right from the start. Call (877) 610-2993 for an exact quote, estimates are free.
Call Gatewood Fence & Gate for Gate Installation in Tampa
If you need a new driveway gate, a double swing gate, or a sliding gate in Tampa, call (877) 610-2993. Hal will answer, or someone from his crew who works in Tampa every week. We will set a time to measure, give you a written price before any work starts, and install the gate the way it should be done for this city’s weather. That means surge protection, stainless hardware near the bay, and posts set deep enough to hold through the rainy season. The name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Tampa since 2001.