Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Plainfield, IN
Gate repair in Plainfield, IN typically runs between $150 and $480 for most residential fixes, and we can usually have someone at your property the same day you call. Hendricks County’s clay-heavy soil and hard freeze-thaw cycles mean Plainfield gates fail in predictable ways: posts heave out of plumb by March, hinges rust through by August, and subdivision entrance gates built in the 1990s and 2000s are all hitting their first major repair cycle at once. We’re Gatewood Fence & Gate, locally owned and owner-operated since 2001, and we answer the phone with a live person 24 hours a day at (877) 610-2993.
Why Plainfield Homes Are Different
Plainfield sits on the same clay-heavy soil that covers all of Hendricks County, but its economy creates a gate-repair market unlike anywhere else in the region. The town hosts Indiana’s densest concentration of distribution and fulfillment centers along I-70, FedEx, Amazon, and others, which means our crew regularly shifts from fixing an ornamental aluminum swing gate in a residential subdivision to welding a heavy-duty commercial slide gate on a 500,000-square-foot facility the same morning.
That split workload matters for homeowners. Because we keep industrial-grade parts and welding equipment stocked for the warehouse belt, we don’t have to order basic residential hardware from across state lines. Your gate gets fixed faster.
The residential stock is equally distinctive. Most of Plainfield’s neighborhoods are post-1990s HOA-governed subdivisions with ornamental aluminum or steel driveway and community entrance gates now entering their 15-to-25-year repair window simultaneously. A smaller stock of older homes lines the US-40/National Road corridor with original wood-post and chain-link gates whose ferrous hardware has been rusting through Indiana’s humid summers for decades. Winter freeze-thaw heaves the posts. Summer humidity finishes the hinges. By spring, we’re resetting posts in Saratoga, replacing rusted hardware near Hummel Park, and realigning community entrance gates off Dan Jones Road, sometimes all in the same week.
Gate Repair in Plainfield
Most gate repairs in Plainfield fall between $150 and $480, with same-day service available when you call before early afternoon. The repair that lasts starts at the hinge post, not the panel, because Hendricks County clay swells and contracts every winter and that movement is what actually fails. We weld on site, quote in writing before any work starts, and stand behind every job with the 90-Day Done Right Promise. Gate Repair is what we’ve done since Hal Gatewood opened the shop in 2001.
Electric Gate Repair
When an electric gate stops responding to the remote or keypad, the cause is rarely as simple as a dead battery. In Plainfield, we see control board failures after spring thunderstorms roll through, and solenoid problems that develop gradually through winter. We diagnose the actual fault rather than swapping parts on a guess. Electric gate repair, including diagnosis and a new control board or limit switch, usually lands between $250 and $480. We service Linear, Viking, Ghost Controls, and DoorKing systems, and we stock common parts locally so most repairs don’t wait on shipping.
Hinge and Post Repair
A gate sags in the hinge post, not in the middle, and that’s where we start. Hendricks County’s clay-heavy soil expands and contracts hard through Indiana winters, and that movement knocks posts out of plumb. We weld on site, which means your gate stays in your driveway while we repair it. Post re-setting with concrete, when the freeze-thaw cycle has done real damage, generally runs $350 to $650 depending on post type and soil conditions. If a post needs replacement, we set it deeper than code minimum with concrete formulated for freeze-thaw cycles.
Gate Realignment
By spring, a lot of Plainfield gates have drifted out of alignment even if they still work. You’ll notice a wider gap at the latch side, dragging at the bottom, or a gate that no longer closes fully without a push. We square the frame, adjust the hinges, and re-level the operator if it’s automated. A hinge replacement or minor realignment typically runs $150 to $300. Then we check the whole travel path so the first hard freeze doesn’t undo the work.
How fast can you get to my property in Plainfield?
In most cases, we can have someone at your Plainfield property the same day you call, especially for emergencies like a gate that won’t close or a security gate stuck open. We answer the phone 24/7 with a live person, and scheduling is coordinated from our Indianapolis office so Plainfield calls get routed to a crew that’s already working the area. Call (877) 610-2993 and we’ll give you a straight arrival window.
Can you repair a gate the same day in Plainfield?
Most common repairs, like hinge replacement, realignment, and many electric gate faults, can be completed same day once we’re on site. If we need a specific part for a commercial slide gate on the I-70 corridor, we usually have it locally or can source it same week. We’ll tell you upfront what the timeline looks like before you commit to anything. Call (877) 610-2993 for a realistic estimate.
Gate Installation in Plainfield
A new driveway gate in Plainfield typically runs $2,800 to $7,500 installed, depending on whether you’re getting a single swing panel, a sliding gate for a narrow lot, or a double gate for a wider drive. Most residential jobs we schedule within two weeks of the measure, and we quote the full price in writing before any work starts. If you live off Stafford Road, near the Shops at Perry Crossing, or in one of the HOA communities along Moon Road, you already know the style requirements most subdivisions enforce. Gate Installation is measured, ordered, and scheduled, never rushed.
Driveway Gate Installation
Driveway gates are what we install most in Plainfield’s subdivisions, especially where ornamental aluminum and steel entrance gates are now 15 to 25 years old and hitting their first major replacement cycle. We measure the drive width, check the slope, and recommend either a single swing panel or a double gate depending on how much room the post line has. A single swing driveway gate runs $2,800 to $5,500 for aluminum or steel, including posts, hinges, and latch hardware. Hendricks County clay causes posts to heave, so we set posts deeper than code minimums with concrete that handles freeze-thaw cycles.
Sliding Gate Installation
Sliding gates are the right call for shorter driveways or lots where a swing gate would arc into the street. We see this regularly in Plainfield’s older sections along National Road, where front setbacks are tighter. A sliding gate rides on a track or cantilever system and handles heavy use well. Sliding driveway gates run $4,200 to $8,500 depending on track versus cantilever design and whether you add a motor from day one.
Pedestrian Gate Installation
A pedestrian gate gives you a separate entry point without opening the big driveway gate every time someone walks up. We install these a lot in Plainfield’s HOA communities where foot traffic from the trail system is constant. Pedestrian gates run $800 to $2,200 installed, depending on material and whether it ties into an existing fence line. The gate gets matched to your fence line, with hardware rated for the same weather exposure.
How quickly can you install a gate in Plainfield?
Most residential gate installations in Plainfield are scheduled within two weeks of the measure, and the measure itself usually happens within two business days. We keep common aluminum and steel gate stock local, so unless you need a custom size or a specific HOA-approved style, we’re not waiting on a distributor across state lines. Call (877) 610-2993 and we’ll give you a firm installation date during the estimate.
Do you weld on site or order pre-fabricated panels?
Both, and which route we take depends on the job. Custom steel gates get measured, cut, and welded in our shop, then finish-welded on site at the posts. Ornamental aluminum panels arrive pre-fabricated from the manufacturer and we assemble and hang them on site. If an existing gate needs a hinge plate welded or a stress crack repaired, Hal does that in your driveway without hauling the gate off.
Gate Motor & Opener in Plainfield
When a gate motor dies in Plainfield, it’s rarely at a convenient time. It fails on a Monday morning when you’re already late, or on a Friday night with a week’s worth of deliveries queued at your dock. In Plainfield specifically, we see two very different failure patterns: HOA-governed subdivisions near the I-70 corridor with ornamental aluminum driveway gates entering their first motor repair cycle, and the heavy-duty commercial slide gates serving the warehouse belt that runs along Stafford Road. Gate Motor & Opener service covers both.
Motor Repair
Motor repair is where we spend most of our time in Plainfield. A gate motor that hums but doesn’t move usually points to a capacitor failure or a stripped gear. One that moves erratically or only opens halfway often has a limit switch problem. We diagnose on-site, explain what we found in plain English, and replace only what’s actually failed. A basic motor repair runs $180 to $420. Our repair-first approach comes from seeing companies swap entire operators when a $45 part would have done the job.
Linear Motor Service
Both the Linear brand and linear-style actuators are common in Plainfield’s housing stock. The post-1990s subdivisions around Saratoga and Bluewood frequently installed Linear operators on their developer-built driveway gates. Those units are dependable but their internal clutch can loosen over time, letting the gate sag just enough to miss the close limit. Linear actuator replacement runs $500 to $900 for a full replacement, or $150 to $300 for repairs. We service both the actuator and the control board, and we keep common Linear parts on the truck.
Slide Motor Replacement
Plainfield has more slide gates per capita than almost any town in Hendricks County because of the I-70 warehouse belt. Heavy-duty cantilever and track slide gates at distribution centers run hundreds of cycles a day, and their motors wear differently than anything residential. Slide motor replacement on a residential gate runs $700 to $1,300; on a commercial gate, $2,800 to $5,500. A commercial slide gate motor that’s been grinding without lubrication or running on a misaligned track will fail mid-shift and shut down dock operations. We understand that downtime costs real money.
How much does a gate motor repair cost in Plainfield?
A typical motor repair in Plainfield runs $180 to $420, which is in line with the rest of Hendricks County. Commercial work on the warehouse corridor runs higher because the gates are heavier and the operators are industrial-grade. You won’t pay more because you’re in Plainfield; our pricing is the same across the county, and we don’t charge a trip fee anywhere inside the county line. Your exact quote is free, and it’s the price you pay. Call (877) 610-2993.
Do you handle the power run and safety edges for a new gate motor installation in Plainfield?
Yes. A gate motor installation isn’t just bolting on an operator; it includes the low-voltage conduit run, photo eyes, safety edges, and proper grounding to protect the board from Indiana lightning. Our crew handles all of it, and we validate the safety system before we leave. That’s part of why our installations run $850 to $1,600 for residential work; it’s the whole job, not just the motor. Call (877) 610-2993 for a free measure and written quote.
Gate Access Control in Plainfield
Gate access control in Plainfield runs $180 to $520 for most residential keypad, remote, or phone entry work, while commercial slide-gate loops and photocells on the I-70 warehouse belt typically land between $450 and $1,400 depending on wire runs and post condition. We’re the local crew that handles both ends of that range in the same week. If your keypad stopped reading codes off Perry Road, or a loop detector quit at a fulfillment center gate near the I-70 interchange, we carry the parts and we answer the phone live. Gate Access Control is wired, tested, and signed off before we leave.
Keypad Entry
Keypad entry in Plainfield subdivisions is the most common call we get, and it’s rarely the keypad itself. More often the keypad is fine and the problem is a hinge post that heaved out of plumb over winter, leaving the gate’s traveler bar six inches from where the lock expects it. A keypad replacement or reprogram on an existing operator runs $180 to $320. We bench-test the keypad, check the wiring at the post, and fix whatever actually failed.
Remote Control Systems
Remote control systems in Plainfield fail in predictable local ways: antenna corrosion on operators near retention ponds, receiver modules that took a lightning surge through the buried wire run, and hand-held remotes whose batteries got cooked in a truck console. We clone and program remotes for most gate operators, from single-unit driveway receivers to community gates that need fifty remotes issued to residents. Phone entry module repair or swap lands at $220 to $480 on residential gates.
Card Reader and Commercial Access
Card readers are the workhorse access control at Plainfield warehouses and logistics centers, where dozens of yard trucks and semis pass through the same gate in a single shift. Salt spray off I-70, airborne dust from the loading docks, and freeze-thaw at the conduit joints all take their toll. Card reader work starts around $300 for hardware alone on a commercial gate. We replace prox readers, repair wiring in the post, and rebuild the reader mounting on gates that have been hit, grazed, or simply corroded into place.
Why do our subdivision’s automatic swing gates keep going out of alignment every spring in Plainfield?
The freeze-thaw cycle in Hendricks County clay is the culprit. Water saturates the soil around the hinge post in late winter, freezes, and heaves the footing a fraction of an inch. One fraction becomes six by April, and now the gate’s latch line is off, the operator is straining, and the safety photocells are tripping. The fix isn’t re-aligning the gate to a crooked post. It’s resetting the post in concrete that can handle the next thaw. Call (877) 610-2993 for a free assessment.
What entrapment protection is required for our commercial slide gate at a Plainfield warehouse?
Any automated gate along the I-70 warehouse belt in Plainfield must meet UL 325 standards for entrapment protection, which means primary monitoring through the operator’s reversing sensor and secondary protection via photo eyes or an edge sensor. We install and test both, and we don’t sign off on a gate that’s missing either. OSHA inspectors and insurance underwriters notice this equipment, and so do we. Call (877) 610-2993 for compliance work.
Gate Parts & Welding in Plainfield
A sagging gate in Plainfield usually comes down to one thing: a hinge or post that has finally given up after too many Indiana winters. Gate parts and welding work in Plainfield typically runs between $125 for a simple hinge replacement and $900 for a full post reset with welded reinforcement, and most residential jobs are finished the same visit. We weld on site because a gate hangs differently on its actual posts than it does on a shop bench, and fixing it in place is the only honest way to do the work. Gate Parts & Welding is core to what we do, not a side skill.
Hinge Replacement
Hinge replacement in Plainfield usually means one of two repairs: swapping out a seized or rusted residential hinge on an ornamental aluminum gate, or cutting off and re-welding a heavy barrel hinge on a commercial slide gate along the I-70 corridor. A standard residential hinge replacement runs $125 to $240 per hinge, depending on whether it’s a bolt-on or a weld-on rebuild. If the hinge has torn loose from the post, we’ll weld on a reinforcing plate rather than just screwing into the same stripped holes.
Post Replacement
Post replacement in Plainfield almost always involves one of two problems: a wood post that rotted at ground level on an older property near the US-40 corridor, or a steel post that has heaved and shifted after enough Indiana winters in clay-heavy soil. A full post replacement with concrete footing and welded brackets runs $450 to $900. We dig out the old footing, set the new post in concrete, and if the job is steel-on-steel, we weld the hinge brackets rather than relying on bolts alone.
Rail Repair and Custom Welding
Rail repair covers the horizontal frame members that crack, bow, or separate from the pickets after years of gate cycles and wind load. On ornamental aluminum gates in Plainfield, we see rail failures most often right at the mid-rail welds, especially where a motor arm is mounted. Rail repairs, including crack welding and reinforcement, typically run $180 to $400. Custom welding work runs $150 to $600 depending on scope. We weld the crack, fishplate it with a reinforcing section when needed, and check the picket attachments along the full length so the gate is actually straight again, not just patched.
Can you weld a gate in place, or does it have to be taken to a shop?
We weld on site. The gate stays in your driveway, on its posts, where we can see how it hangs and how it meets the latch. Welding on a bench and then reinstalling doesn’t account for the post’s angle or the opener’s travel, so we don’t do it that way. A mobile rig with a clean weld and a reinforcing plate is faster and more honest than hauling your gate anywhere. Call (877) 610-2993 to schedule.
What’s covered under your warranty in Plainfield?
Every parts and welding job carries our 90-Day Done Right Promise, in writing, on the invoice. If a hinge we replaced fails or a weld we made cracks inside 90 days, call us and we’ll come back and make it right at no charge. No fine print, no “normal wear” dodge. If we messed something up, we own it. That’s the whole promise. Call (877) 610-2993 if you’d like to talk through a specific job.
Brands We Service in Plainfield
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Plainfield’s market, we keep common parts stocked for Linear, Viking, Ghost Controls, and DoorKing systems so most repairs don’t wait on shipping. Turnaround on brand-specific parts is typically same-day or next-day for residential calls, and we source commercial-grade components from the same suppliers that stock the I-70 warehouse belt. our brands
Pricing for Gate Repair in Plainfield, IN
| Service | Typical range in Plainfield |
|---|---|
| Hinge replacement or minor realignment | $150 - $300 |
| Electric gate repair (control board, limit switch) | $250 - $480 |
| Post re-setting with concrete | $350 - $650 |
| Automatic gate operator replacement / major welding | $500+ |
| Pedestrian gate installation | $800 - $2,200 |
| Single swing driveway gate installation | $2,800 - $5,500 |
| Double swing driveway gate installation | $5,500 - $9,500 |
| Sliding driveway gate installation | $4,200 - $8,500 |
| Security gate with automation | $7,000 - $14,000 |
| Basic gate motor repair | $180 - $420 |
| Residential motor / opener installation | $850 - $1,600 |
| Commercial slide motor replacement | $2,800 - $5,500 |
What pushes price up in Plainfield: commercial-grade equipment on the I-70 warehouse belt, wire pulls longer than 50 feet for access control, and post replacement rather than adjustment after freeze-thaw damage. What doesn’t: we have no trip charge inside Hendricks County, we take $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. The price is quoted and agreed in writing before any work starts, and that’s the price you pay.
Neighborhoods We Serve in Plainfield
We work across the entire 46168 ZIP code, from the HOA subdivisions west of I-465 to the older homes along the National Road corridor and the warehouse belts east and west of I-70. A typical repair call in any of these areas gets a same-day response when you reach us before early afternoon.
- Saratoga
- The Settlement
- Sugar Grove
- Village at New Castle
- Brentwood
Service Area - Cities Near Plainfield
We cover Plainfield, IN as our regular daily route, with scheduling coordinated from our Indianapolis office and crews working locally throughout Hendricks County. We also serve Avon, IN, Mooresville, IN, Danville, IN, Speedway, IN, and Fairfield Heights, IN with the same no-trip-charge policy inside the county and the same live-answer phone line at (877) 610-2993.
Serving Plainfield, IN - Our Local Coverage Area
Gatewood Fence & Gate crews serve Plainfield and the communities around it; dispatch is coordinated from our Indianapolis office. The map shows the Plainfield coverage area; if your address is on it, we can help.
Also serving nearby: Plainfield, IN, Avon, IN, Mooresville, IN, Danville, IN, Speedway, IN, Fairfield Heights, IN.
FAQs About Gate Repair in Plainfield
Yes. We cover all of Plainfield’s 46168 ZIP code, including subdivisions off Dan Jones Road, Stafford Road, and Clarks Creek Road, plus the commercial corridor along I-70. If you’re inside Hendricks County, there’s no trip charge. That includes the warehouse and distribution center gates that most residential companies won’t touch.
Most Plainfield HOAs require approval for aesthetic changes like gate style or color, but basic repair and maintenance rarely need board permission. We work with HOA managers regularly on community entrance gates and can provide written scope descriptions for approval if your association requires it. Call (877) 610-2993 and we’ll walk you through what’s needed.
Plainfield pricing runs very close to what you’d pay in Avon, Mooresville, or Danville, because it’s the same crews, the same part sources, and the same soil conditions. Most residential repairs in Plainfield fall between $150 and $480. What’s different here is the mix of work: Plainfield has a lot of commercial vehicle-access gates along the I-70 warehouse belt, and those cost more because the equipment is heavier and the downtime is expensive.
Call Gatewood Fence & Gate at (877) 610-2993 for a free estimate on any gate repair, installation, motor service, access control, or welding work in Plainfield. A live person answers the phone 24 hours a day, and we’ll give you a written price before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plainfield Customers Say
"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield