Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Plainfield
Gate repair in Plainfield usually means one of two things: a residential ornamental gate that has sagged or stopped responding, or a commercial slide gate on the I-70 warehouse belt that has to work every single shift. We handle both, often in the same day. Hal Gatewood has been fixing gates since 2001, and the shop is close enough that we can be at a home off Perry Road or a fulfillment center near Ronald Reagan Parkway without burning half the morning in traffic. If your gate is down, call (877) 610-2993 and a live person answers. No phone tree. No call center in another state.
Why Gatewood Fence & Gate Is Plainfield’s Preferred Gate Repair Company
We are locally owned and owner-operated. Hal Gatewood’s name is on the shop, the invoice, and the truck that shows up in your driveway. That matters in a town like Plainfield, where people still want to look the person doing the work in the eye. We have been serving Plainfield and the surrounding Hendricks County communities for over 29 years as a company, and Hal has been at it personally since 2001. Our published address and license number are available to anyone who asks, because we have nothing to hide behind.
Our Gate Repair work in Plainfield includes everything from a broken hinge on a subdivision entrance gate to a full control board replacement on a warehouse slide operator. We carry parts for Linear, Viking, Ghost Controls, and DoorKing systems on the truck, so most repairs do not wait on a shipment. The 90-Day Done Right Promise is stamped in writing on every job. If it is not done right, one call brings us back. No runaround, no fine print, no arguing about who is at fault.
Our Gate Repair Services in Plainfield
Electric Gate Repair
Electric gates in Plainfield fail in predictable ways, especially on homes built in the 1990s and early 2000s where the original Plainfield Gate Motor & Opener is still in place. Control boards short out, limit switches wear down, and keypads stop talking to the receiver. We diagnose the actual failure before recommending anything. If a board can be repaired or retrofitted, we repair it. If replacement is the cheaper answer over the life of the gate, we tell you that plainly and give you a written number before any work starts.
Automatic Gate Repair
Automated gates along Plainfield’s newer subdivisions, especially HOA communities off Stafford Road and around Hummel Park, are entering their first major Gate Access Control - Plainfield repair cycle at 15 to 25 years old. The openers were installed when the homes were built, and they are now failing. We service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The person who shows up has seen your operator before. That saves you the cost of paying someone to learn on your gate.
Hinge & Post Repair
Hendricks County has clay-heavy soil, and Indiana winters freeze and thaw hard. That combination rotates gate posts, especially on older residential properties along the US-40 corridor where original wood posts have been in the ground for decades. A gate sags in the hinge post, not in the middle, and that is where we start. We excavate, set new post footings below frost line where the job calls for it, and re-align the panel so it sits true. Fix the panel without the post and you will fix it twice.
Gate Realignment
Every spring, we get calls from Plainfield homeowners whose automatic gates have started grinding, sticking, or reversing mid-travel. The cause is almost always a post that heaved over the winter. We correct the alignment, reset the travel limits, and in many cases re-pour the post footing so the same problem does not return next March. It is straightforward work when you understand how Indiana soil behaves, and it is the reason a local shop beats a national outfit on this repair every time.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plainfield
We are certified to service nine major gate brands: Linear, Viking, Ghost Controls, DoorKing, LiftMaster, FAAC, BFT, Elite, and Mighty Mule. For Plainfield customers, that means we stock our Gate Parts & Welding in Plainfield locally and can often complete a repair the same day we diagnose it. Older Linear and Viking residential operators are common in the subdivisions around 46168, and DoorKing is the workhorse on warehouse gates along the I-70 corridor. When your gate brand matters less than whether we can fix it today, the answer is usually yes.
Common Gate Repair Problems We See in Plainfield Homes
- Legacy control boards failing in humid summers. Pre-2000 operators from LiftMaster and DoorKing develop intermittent faults when Indiana humidity sits on aging circuit boards. Gates stop mid-travel or ignore keypad commands. Some boards can be repaired; others get a retrofit control package that costs half what a full system replacement would.
- Hinge posts rotating in clay soil. Freeze-thaw cycles heave and shift posts every winter. By spring, gates that worked fine in October are dragging on the latch side or tripping safety photocells. The fix is a proper post footing, not just re-tightening hinge bolts.
- Safety photocells misaligned after ground movement. When a post moves even half an inch, the photocell beam drifts off target and the gate refuses to close or reverses randomly. We see this constantly in Plainfield subdivisions with post-1990s ornamental steel gates.
- Rack and pinion wear on I-70 warehouse slide gates. Commercial slide gates near FedEx-adjacent facilities take a beating. When loop detectors fail to register a trailer, the gate hard-stops against it. Repeated hard stops chew up rack teeth. This is heavy industrial work most residential gate companies will not touch, and it is a big part of what we do in Plainfield.
Pricing for Gate Repair in Plainfield, IN
In Plainfield, a typical hinge and post repair on a residential ornamental gate runs $275 to $650, depending on whether the post needs a new concrete footing. Electric gate repair, including a service call, diagnostics, and a common part like a limit switch or keypad, usually lands between $180 and $400. A legacy control board replacement or retrofit on an older LiftMaster or DoorKing system typically costs $450 to $900. Commercial slide gate work on the I-70 warehouse belt is quoted per job because the equipment varies so widely. The price we quote is the price you pay, in writing, before any work starts. We also run standing offers that do not require haggling: $40 off any repair over $200, no trip charge inside Hendricks County, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 and we will give you an honest range over the phone.
We Also Serve Cities Near Plainfield
Our Gate Repair team works throughout Hendricks and west Marion County. If you are in Avon, Mooresville, Danville, or Speedway, you get the same live-answer phone line, the same upfront pricing, and the same 90-Day Done Right Promise. Plainfield is home base for much of our commercial work, but residential calls from neighboring towns are routine. Call and ask for the next available slot.
Serving Plainfield, IN - Our Local Coverage Area
We’re based in the Plainfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Plainfield
Yes, in most cases. A pre-2000 LiftMaster or DoorKing operator can accept modern safety photocells and often a new control board retrofit. The gate itself rarely needs replacement. In Plainfield, we do this retrofit regularly on ornamental swing gates in HOA subdivisions, and it typically costs $450 to $900 depending on the board type. Call (877) 610-2993 and we will tell you over the phone whether your specific operator is a good retrofit candidate.
Plainfield’s position along the I-70 corridor exposes gates to more road-salt spray and diesel particulate than Avon or Brownsburg, which sit further from the heavy truck traffic. Summer humidity then accelerates surface rust on ferrous hinges and latch hardware. We treat Plainfield gates with corrosion-resistant hardware or protective coatings more often than we do in surrounding towns simply because the conditions demand it.
The first repair is the hinge post, not the panel. A gate that sags every spring in Plainfield almost certainly has a post that is rotating or heaving in the clay soil. Re-tightening hinge bolts is a temporary patch. The real fix is excavating the post, setting it in a proper concrete footing below frost line, and realigning the gate. Expect to pay $275 to $650 depending on post condition. Estimates are free at (877) 610-2993.
Yes, substantially different. Slide gates along the I-70 warehouse belt near FedEx and Amazon facilities run hundreds of cycles a day and require monthly track inspection, rack and pinion lubrication, and loop detector testing. A failure there stops a shift, not just a driveway. Our crew regularly shifts from a subdivision gate repair to a commercial slide gate correction in the same afternoon, which is work most residential-only companies will not take on.
Many early-2000s solar openers can be repaired, especially if the issue is a dead battery, a corroded terminal, or a failing solar charge controller. But replacement is often cheaper when the motor itself is worn out, because repair labor on a 20-year-old unit may reach 60 to 70 percent of a new opener’s cost. We will diagnose it honestly and give you both numbers before you spend a dollar. Call (877) 610-2993 for a straight answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Plainfield since 2001.