Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
When a driveway gate grinds to a halt or a wrought iron panel cracks at the hinge, Inglewood homeowners call us. Most gate failures here trace back to two things: the salt-laden marine layer rolling in off Santa Monica Bay every night, and a wave of post-SoFi Stadium automation jobs done on gates that were never built to move under power. We’re Gatewood Fence & Gate, and Hal Gatewood’s name is on the shop and on every invoice. Call (877) 610-2993 and a live person picks up, day or night.
Why Inglewood Homes Are Different
Inglewood sits about five miles from Santa Monica Bay, close enough that the nightly marine layer deposits salt-laden moisture onto exposed metal hardware. Hinges, springs, and latch components that might last ten to twelve years inland commonly fail in five to seven on properties in the western ZIP codes closest to the ocean. We see it constantly: a gate works fine through spring, and by late summer the hinge pins are corroded and the latch won’t seat.
The housing stock compounds the problem. Inglewood is heavily concentrated in post-WWII stucco bungalows and small ranch homes, many with ornamental wrought iron driveway gates original to the 1970s and 1980s. Gate posts are often set in cracked or heaved concrete footings, and the narrow driveway widths of that era create tight clearance constraints when retrofitting modern slide or swing gate openers. Add in the SoFi Stadium effect, and you have a lot of original welded-steel frames now carrying motorized openers they were never engineered for. That combination of upgrade demand and accelerated wear defines gate work in Inglewood more than any other factor.
Gate Repair in Inglewood
Gate repair in Inglewood typically starts with a worn hinge, a cracked weld, or a post that has shifted in its footing. The marine layer works on exposed hardware every night, and gates that would run quietly inland for a decade often need service in five to seven years here. We fix the gate in your driveway rather than hauling it off or swapping parts that don’t need swapping.
This is where our repair-first philosophy matters. On Inglewood’s 1940s-through-1970s homes, the original wrought iron gates were built to be opened by hand. When automation gets added later, the stress points change. We see cracked welds at hinge brackets, bent rails, and stripped opener gears on gates that were never designed for motorized load. Hal welds on site, so the gate stays on your property and you can watch the repair happen. The Gate Repair work we do in Inglewood covers everything from seized barrel hinges to full frame reinforcement, with the price quoted and agreed before any work starts.
Hinge and Latch Repair
A gate sags in the hinge post, not in the middle, and that is where we start. Inglewood’s older driveways frequently have original barrel hinges that have gone decades without attention. The salt air seizes the pins, the gate binds, and the opener motor works twice as hard. We replace worn hinge pins with heavier-gauge steel and realign the gate so it swings true. Hinge replacement or weld repair on a single gate typically runs $180 to $340 in Inglewood.
Frame and Weld Repair
Bottom rails on wrought iron gates rust from the inside out here. Nighttime marine layer moisture sits in the low spots and eats through the metal. We cut out the rotted section, weld in new steel matching the original profile, and grind it smooth. If the rust is widespread across the frame, we’ll tell you honestly and quote a full replacement rather than selling you a patch job that fails next season. Structural frame welding on a cracked joint or broken picket runs $150 to $400 per weld point.
Post Straightening and Reset
When a post shifts in a cracked footing, the whole gate throws off. Inglewood’s post-war lots are full of concrete footings poured shallow in the 1950s and 60s, and decades of soil movement plus occasional seismic activity destabilize them. We cut out the old post, weld a new steel post set at proper depth and alignment, and hang the existing gate back on it. Fix the panel without the post and you’ll fix it twice. Full post replacement in Inglewood ranges from $650 to $1,200 depending on the excavation and concrete work required.
How much does gate repair cost in Inglewood?
Most Inglewood hinge and weld repairs run $180 to $340. Frame welding on a cracked joint costs $150 to $400 per weld point, and a full post replacement runs $650 to $1,200. Your quote is written down and agreed before any work begins. Call (877) 610-2993 for a free estimate.
Can you come out today if my gate is stuck open?
Yes. A gate stuck in the open position is a security problem, and we treat it that way. We keep same-day response available for Inglewood, especially in the higher-foot-traffic corridors near Century Boulevard and Prairie Avenue. A live person answers around the clock, no voicemail. Call (877) 610-2993.
Gate Installation in Inglewood
Gate installation in Inglewood runs $1,800 to $6,400 for most residential driveway gates, depending on whether you’re replacing an old wrought iron gate on a 1950s bungalow near Centinela Avenue or adding a new motorized security gate off Prairie Avenue. We’ve been putting gates in across Inglewood long enough to know which lots have the tightest driveway clearances and which posts are set in cracked concrete that needs redone before any gate goes up. Hal Gatewood has been doing this work since 2001, and he still quotes every job himself.
Before we install anything, we look at what the gate is hanging on. A new gate bolted onto a bad post is just a future service call. The Gate Installation work we do here starts with the footing, not the panel.
Driveway Gate Replacement
Most Inglewood driveway gates sit on homes built between the 1940s and 1970s, which means the original posts are often set in cracked or heaved concrete. We don’t bolt a new gate onto bad posts and call it done. If the footing is compromised, we cut it out and pour new concrete before the first hinge goes on. A basic single swing driveway gate, powder-coated steel, starts around $1,800 to $2,400 installed in Inglewood.
Pedestrian Gate Installation
Pedestrian gates in Inglewood take a beating from the marine layer. Salt-laden moisture rolls in nearly every night, working its way into cheap hinges and latch hardware faster than you’d believe. When we install a pedestrian gate, we use hardware rated for coastal conditions even though Inglewood isn’t technically beachfront. A pedestrian gate alone runs $600 to $1,200, and it costs a little more up front to avoid a service call two years down the road.
Sliding Gate Installation
Sliding gates make sense on Inglewood lots where a swing gate would arc out into the sidewalk or into a car parked in a narrow driveway. The post-war housing stock here has tight approaches, and a slide gate that runs flat along the fence line buys back every inch of clearance. A track-style sliding gate typically lands between $3,200 and $5,000 depending on width and whether we’re adding a motor.
How soon can you install a gate in Inglewood?
Standard installations are typically scheduled 7 to 14 days out, depending on whether we’re pouring new post footings or running power. If your existing gate fell or was hit and the property is open, we treat it as emergency work and can usually secure it the same day or next morning. Call (877) 610-2993 for a straight answer on timing.
What kind of warranty comes with a gate installation in Inglewood?
Every job carries the 90-Day Done Right Promise in writing. If something isn’t done right, one call brings Hal back, no runaround. That’s on top of the manufacturer’s warranty on the opener and hardware. The promise is printed on the invoice, not hidden in fine print. Call (877) 610-2993 for a free estimate.
Gate Motor & Opener in Inglewood
When a gate motor quits in Inglewood, it rarely happens at a convenient hour. It fails as you’re backing out for work, or after the marine layer has already coated the hinges with condensation. The gate won’t move, the remote does nothing, and the manual release is frozen because salt air has been quietly eating the mechanism for two years. That’s the call we answer, and the person who shows up is accountable for the work.
Most motor problems on Inglewood properties trace back to the same root issue: a gate that was never designed for automation. After SoFi Stadium opened in 2020, a lot of homeowners had handymen mount LiftMaster or Ghost Controls openers onto original welded-steel frames. Those frames weren’t engineered for motorized load, and the result is bent hinges, cracked welds, and stripped gears. We fix the gate first, then service the motor. See our Gate Motor & Opener work for more detail.
Motor Repair and Diagnostics
Most motor repairs in Inglewood fall into familiar buckets: gear stripping from a gate that binds against age-warped steel, capacitor failures from power surges, or limit switch drift caused by years of metal expansion and contraction. We diagnose on site, show you the failed part, and tell you honestly whether it’s worth repairing. A standard motor repair typically runs $180 to $340 in Inglewood, and Hal won’t quote you a new opener if a $40 part and an hour of work gets you another six years.
Opener Replacement
A full opener replacement in Inglewood usually lands between $850 and $1,600, with the higher end reserved for heavier slide gates and jobs that need new posts or base plates welded in. We match the motor to the gate’s actual weight and swing, not the other way around. On the narrow driveways common to the 1940s-through-1970s housing stock here, the right operator size matters for clearance.
Linear Motor Service
We service Linear motors across Inglewood, from swing-arm models on compact driveway gates near Morningside Park to heavier slide systems on wider lots east of Crenshaw Boulevard. Linear motors are simple to maintain, but coastal moisture still finds its way into the circuit boards. Linear motor installations on an existing sound gate commonly run $700 to $1,200, and we carry common Linear boards, remotes, and actuators locally so repairs don’t wait on a shipped part.
How quickly can you get to my house in Inglewood?
For gate motor failures, we can usually have someone at your Inglewood property the same day if you call before early afternoon. Emergency calls after a gate fails in the open position get priority because that’s a security problem, not just an inconvenience. Call (877) 610-2993 and a live person answers 24/7.
Do you warranty gate motor work in Inglewood?
Every job carries the 90-Day Done Right Promise in writing. If something isn’t right with the repair or installation within 90 days, one call brings Hal back to make it right. That’s his name on the invoice and on the shop. Call (877) 610-2993 for a free estimate.
Gate Access Control in Inglewood
Gate access control in Inglewood usually comes down to one of two jobs: fixing a keypad, intercom, or opener that stopped responding, or adding modern entry control to a gate that still runs on a key. We work on the gates already standing in your driveway rather than pushing a full replacement. The marine layer off Santa Monica Bay is rough on exposed wiring and circuit boards in this part of Los Angeles, and we see corrosion failures on access systems that would run for years elsewhere.
After SoFi Stadium opened, event-day traffic transformed residential corridors near Century Boulevard and Prairie Avenue. Homeowners who had never worried about driveway security suddenly wanted keypads, remotes, and phone entry. A lot of that work was done quickly and cheaply, and we’re now repairing the results. Our Gate Access Control work in Inglewood focuses on getting it right the second time.
Keypad Entry
Keypad access is the most practical upgrade for Inglewood homeowners who want to stop handing out keys. A wall-mount or gooseneck keypad wired to your existing opener lets family, housekeepers, or dog walkers get in with a code you control. We see a lot of keypads added to older wrought iron driveway gates after event-day parking made people think harder about who can pull into the driveway. In Inglewood, a keypad install typically runs $450 to $950 with wiring, programming, and weather sealing included.
Remote and Receiver Service
If the gate works from the wall button but not from the car, or it worked yesterday and won’t this morning, it’s usually a frequency or receiver issue. We stock remotes and receivers for major brands and can program most units same visit. Basic remote programming and receiver checks in Inglewood run $85 to $200, and a full receiver replacement is $250 to $500 depending on the system.
Phone Entry Systems
Phone entry works well for Inglewood properties with limited driveway visibility, which is a real thing on these narrow lots. A visitor enters a code on a call box at the gate and the system dials your cell phone. You punch a key and the gate opens. No app, no cloud subscription, no wiring to your modem. These setups fit the bungalow properties along side streets where you can’t see who’s at the gate from the house. Phone entry systems run $800 to $1,600 installed in Inglewood.
How fast can you respond to a gate access control failure in Inglewood?
We can typically reach any Inglewood address the same day for emergency access failures, and we offer next-day scheduling for most other calls. A gate stuck open on event day or stuck shut with your car inside is a problem we prioritize. Call (877) 610-2993 and a live person gives you a real arrival window.
Does the 90-Day Done Right Promise apply to access control work in Inglewood?
Yes, and it’s printed on every invoice. If anything we installed or repaired fails within 90 days, one call brings Hal back. No pro-rating, no argument about normal wear. This applies to keypads, readers, remotes, phone entry, and board repairs. Call (877) 610-2993 for a free estimate.
Gate Parts & Welding in Inglewood
When a driveway gate seizes up or a wrought iron panel cracks at the weld, Inglewood homeowners want it fixed correctly the first time. Gate parts and welding here typically runs $180 to $450 for common hinge and rail repairs, with full post replacements in the $650 to $1,200 range. Hal welds on site, in your driveway, so the gate stays on the property and you watch the repair happen.
The salt air in Inglewood means parts fail differently than they do ten miles inland. Hinges, springs, and latch hardware that might last a decade in the San Gabriel Valley commonly fail in five to seven years in the western ZIP codes near the coast. We stock heavier-gauge replacement parts and stainless hardware that shrugs off that moisture. More detail is on our Gate Parts & Welding page.
Hinge Replacement
Inglewood’s 1940s-through-1970s homes often have original barrel hinges that have gone decades without grease. When they seize, the gate panel binds and the opener motor starts straining. We replace worn hinge pins and leaf hinges with heavier-gauge steel, re-weld the mounting tabs, and realign the gate so it swings true. Hinge replacement on a single gate runs $180 to $340 in Inglewood, and on gates where the marine layer hits hardest we spec stainless hinge hardware that resists salt corrosion.
Post Replacement
A gate sags in the hinge post, not in the middle. Inglewood’s older yards frequently have posts set in cracked or heaved concrete footings, and when the post moves, so does the whole gate. We cut out the old post, weld a new steel post set at proper depth, and hang the existing gate back on it. Fix the panel without the post and you’ll fix it twice. Full post replacement runs $650 to $1,200 depending on the excavation and concrete work.
Bottom Rail and Custom Welding
Bottom rails rust from the inside out on wrought iron gates within a few miles of Santa Monica Bay. Nighttime moisture sits in the low spots and eats through the metal. We cut out the rotted section and weld in new steel matching the original profile. Custom welding covers broken pickets, missing scrollwork, cracked frame joints, and reinforcement plates for gates carrying motorized openers they were never designed for. Custom welding runs $150 to $400 per weld point, and bottom rail repair runs $220 to $450.
Can you do emergency gate welding in Inglewood?
Yes. A gate that won’t close is a security problem, not an inconvenience. We handle emergency welding and part replacement for Inglewood homeowners with same-day response in most cases. Calls are answered by a live person 24/7, and the 90-Day Done Right Promise applies to every emergency repair in writing. Call (877) 610-2993.
What if the weld fails again after a repair in Inglewood?
Then one call brings Hal back, no runaround. Every job comes with the 90-Day Done Right Promise, stamped in writing on the invoice. If the weld, hinge, post, or part we installed fails within 90 days, we make it right at no charge. That’s Hal’s name on the shop, not a fine-print promise.
Brands We Service in Inglewood
We service FAAC, BFT, Linear, and Viking openers across Inglewood, along with LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Common boards, remotes, and actuators are stocked locally so most repairs don’t wait on a shipped part. See our brands page for the full list of what we carry and service.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Hinge replacement or weld repair (single gate) | $180 - $340 |
| Frame or picket welding (per weld point) | $150 - $400 |
| Post replacement (single post, welded) | $650 - $1,200 |
| Bottom rail repair | $220 - $450 |
| Basic single swing gate, powder-coated steel | $1,800 - $2,400 |
| Double swing gate | $2,800 - $4,200 |
| Track-style sliding gate | $3,200 - $5,000 |
| Pedestrian gate alone | $600 - $1,200 |
| Motor repair (capacitor, gear, circuit board) | $180 - $340 |
| Full opener replacement | $850 - $1,600 |
| Keypad entry install | $450 - $950 |
| Phone entry system install | $800 - $1,600 |
What pushes price up in Inglewood? Post condition is the biggest variable. If the original 1950s or 60s concrete footing is cracked or heaved, we cut it out and pour new before anything gets mounted, and that adds $300 to $700 per post. The marine layer also means we often recommend stainless hinges and latch hardware in the western ZIP codes, which costs slightly more up front and saves you a service call down the road. Every price gets quoted and agreed in writing before any work begins. The number you agree to is the number you pay.
Neighborhoods We Serve in Inglewood
We work throughout Inglewood, with typical same-day response for emergency repairs and next-day availability for most non-emergency calls. Scheduling is coordinated from our Los Angeles office, and crews serve Inglewood locally.
- Morningside Park
- North Inglewood
- Downtown Inglewood
- Century Boulevard corridor
- Ladera Heights border area
Service Area - Cities Near Inglewood
While this page covers gate work in Inglewood, CA, we also serve the surrounding south LA County communities. Homeowners in Hawthorne, CA, Del Aire, CA, Lennox, CA, Alondra Park, CA, and Lawndale, CA can call the same number for the same upfront pricing and the same 90-Day Done Right Promise.
Serving Inglewood, CA - Our Local Coverage Area
Gatewood Fence & Gate crews serve Inglewood and the communities around it; dispatch is coordinated from our Los Angeles office. The map shows the Inglewood coverage area; if your address is on it, we can help.
Also serving nearby: Inglewood, CA, Hawthorne, CA, Del Aire, CA, Lennox, CA, Alondra Park, CA, Lawndale, CA.
FAQs About Gate Repair in Inglewood
Yes. We work throughout 90306, 90307, 90308, and 90309, including the neighborhoods around SoFi Stadium, Morningside Park, and the residential blocks off Century Boulevard and Prairie Avenue. If you’re in Inglewood proper, you’re in our service area. Call (877) 610-2993.
The marine layer. Inglewood sits about five miles from Santa Monica Bay, and nearly every night salt-laden moisture deposits onto exposed metal. Hinges, springs, and latch hardware that last ten to twelve years inland commonly fail in five to seven here, especially in the western ZIP codes closest to the coast. We spec stainless hardware where it matters. Call (877) 610-2993 for a free assessment.
Yes. Every estimate is free, and we also offer a free second opinion on any written estimate from another company. The price you’re quoted is the price you pay, agreed upon before any work starts. Seniors and veterans save 10% permanently, and there’s no trip charge inside the county. Call (877) 610-2993.
If your Inglewood gate is sagging, grinding, or refusing to move, call (877) 610-2993. Hal Gatewood’s name is on the shop, the address is published, and a live person answers around the clock. You’ll get a free estimate, a written price, and the 90-Day Done Right Promise stamped on the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"He came out in the snow to get our gate closed after a delivery lorry clipped it, then came back in the spring to do the proper repair when the ground had thawed. Only charged for the second visit."
- Ingrid Solheim"The fence is excellent and it was fairly priced. He is not quick to answer email, so if you need him, ring. He always picks up the phone."
- Rodney Falkenrath"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond