Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Inglewood
Installing a gate in Inglewood isn’t a one-size-fits-all job. Between the nightly marine layer off Santa Monica Bay, the 1950s bungalow stock, and the wave of post-SoFi Stadium driveway upgrades, we see installation conditions here that simply don’t exist ten miles inland. A new gate in the 90309, 90310, 90311, or 90312 ZIP codes has to stand up to salt air, a narrow setback, and often a 1970s wrought iron frame that was never meant to be automated. Gatewood Fence & Gate has been owner-operated since 2001, and Hal Gatewood’s name is on every invoice. If you’re weighing a new driveway gate, pedestrian gate, or full security gate in Inglewood, call (877) 610-2993 for a free estimate. We set the price before we start, and we don’t change it at the door.
Why Gatewood Fence & Gate Is Inglewood’s Preferred Gate Installation Company
We’re local in the way that matters. Hal Gatewood owns the shop, lives in the area, and has been fixing and installing gates since 2001. When you call, a live person answers. Always. Not a voicemail queue, not a call center in another state. You’ll speak to someone who knows the difference between a 1950s stucco bungalow’s narrow driveway in the 90310 area and a newer track home further east. Inglewood customers call us after national outfits have quoted one price on the phone and handed them another at the door. That doesn’t happen here. The price is the price, and we put the 90-Day Done Right Promise in writing on every single job. If something isn’t right, one call brings Hal back. No runaround, no fine print.
Our Gate Installation team works across the whole city, from the residential streets around North Inglewood near Century Boulevard down to the blocks near Prairie Avenue. We know Inglewood’s gate history. The 1940s through 1970s housing stock dominates here, and that means we’re usually working with original ornamental wrought iron driveway gates, cracked concrete footings, and operators that predate modern safety codes. We don’t sell you a gate you don’t need. If the frame is sound, we say so and quote the work honestly.
Our Gate Installation Services in Inglewood
Driveway Gate Installation
A new driveway gate in Inglewood runs into two local realities: short setbacks and salt air. On the 1950s ranch homes common around the 90311 area, the driveway is narrow and the gate sits close to the front of the house. That means we’re usually sizing a slide gate or a compact swing setup rather than forcing a full-swing dual leaf into a space it can’t handle. We pour new footings, set steel posts, and mount the operator so the gate’s weight never exceeds the opener’s duty cycle. A drive gate that fights its own motor is a drive gate that strips gears within a year.
Pedestrian Gate Installation
Pedestrian gates in Inglewood take a beating from foot traffic and the coastal marine layer. The original wrought iron entry gates on 1960s and 1970s bungalows are often rusted through at the hinge welds by year five or six near the western ZIP codes. We install new steel pedestrian gates with hardware that’s sized for the salt load, and we set the posts in properly reinforced concrete so you don’t get the classic sagging hatch that drags on the latch side. If you’re pairing it with an access keypad or intercom, we run the low-voltage line at the same time.
Sliding Gate Installation
Sliding gates solve the tight driveway problem, and Inglewood has a lot of tight driveways. On a post-WWII stucco home with maybe ten feet of driveway frontage, a slide gate rides on a rail or cantilever setup and doesn’t need the swing arc a double gate demands. We install rack and pinion drives, set the track or rollers on a poured concrete pad, and make sure the gate doesn’t bind when the ground shifts. Inglewood’s clay-heavy soil expands and contracts with the marine moisture cycle, which means your rail or cantilever roller alignment matters more than anyone thinks. We check it before we leave and stand behind it after.
Swing Gate Installation
Swing gates are the classic Inglewood look, especially on the city’s older properties where a pair of ornamental steel leaves frames the driveway. The failure point is almost always the hinge post. A 1970s wrought iron swing gate with original posts set in cracked concrete will sag within a season or two, and then the opener fights the misalignment until it strips. We install swing gates with welded steel posts, through-bolted hinges, and operator arms sized to the leaf weight. If we’re automating an existing swing gate, we check the post plumb and the hinge wear before we mount anything. Fix the panel without the post and you’ll fix it twice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
We’re certified to service and install operators from Linear, Ghost Controls, DoorKing, Viking, FAAC, BFT, LiftMaster, Elite, and Mighty Mule. That covers the brands most commonly spec’d on Inglewood’s residential gates, including the post-2020 LiftMaster and Ghost Controls retrofits we see near SoFi Stadium. We stock parts locally so a control board swap or gear replacement doesn’t turn into a two-week wait. And because we’re a repair-first shop, we don’t push a full opener replacement when a $40 limit switch or a $90 control board does the job. If you’re already got a DoorKing or Linear opener that’s been problematic, we can tell you whether it’s the board, the motor, or the installation that’s failing.
Common Gate Installation Problems We See in Inglewood Homes
- Salt-corroded hinge posts on original wrought iron gates. The nightly marine layer settles on exposed metal and eats through hinge welds in five to seven years, roughly half the lifespan you’d get inland. A gate that sags at the hinge post, not in the middle, usually means the post itself is rotten at the base.
- Legacy operators that predate modern safety requirements. A lot of Inglewood’s original 1970s and 1980s gate openers lack UL 325 entrapment protection. When we add retrofitted photocells or safety edges, the old control boards often won’t hold the new circuits. Replacing the board is usually cheaper than fighting it.
- Post-2020 handyman opener retrofits on frames that were never engineered for motors. Near Century Boulevard and Prairie Avenue, we regularly see original 1970s welded-steel driveway gates that had a LiftMaster or Ghost Controls opener bolted on after SoFi Stadium opened. The frame flexes, the operator fights the weight, and the gears strip. A proper install means reinforcing or replacing the frame, not just swapping the motor.
- Narrow 1950s driveways with undersized posts. When a handyman mounts an operator on a three-inch post set in a shallow footing, the repeated load cracks the weld or the concrete. We see this constantly. The post carries the gate’s entire weight, so undersized posts mean a gate that fails within a season or two.
Pricing for Gate Installation in Inglewood, CA
We Also Serve Cities Near Inglewood
In addition to Inglewood, we install gates across Hawthorne, Del Aire, Lennox, and Alondra Park. Same crew, same owner, same 90-Day Done Right Promise. If you’re a few blocks over the city line, we still show up with the same free estimate and the same price-before-we-start policy.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Inglewood
It depends on the hinge posts and the frame’s structural integrity. We automate original wrought iron gates all the time, but first we check the post depth, the concrete condition, and the weld quality. If the posts are solid and the frame isn’t rusted through at the stress points, we can mount a properly sized opener and reinforce the hinges. If the gate sags or the posts have heaved, the automation will fail within a year no matter what operator you buy. Show me the gate closing on its own and I’ll show you where it’s failing. Call (877) 610-2993 and we’ll assess yours for free.
The marine layer. Inglewood sits about five miles from Santa Monica Bay, and every night salt-laden moisture settles on exposed metal, corroding hinges, limit switches, and control board contacts. Torrance is closer to the ocean but has different wind patterns, and inland cities like Pasadena or Glendale just don’t carry the same salt load. In Inglewood’s western ZIP codes, hardware that would last ten years inland commonly fails in five to seven. That’s why we spec galvanized and powder-coated components as standard, not as an upsell.
Almost certainly because the opener was mounted on a gate frame that was never engineered for motorized load. The post-2020 upgrade wave around Century Boulevard and Prairie Avenue brought a lot of commercial-grade LiftMaster and Ghost Controls openers onto original 1970s welded-steel frames, and the frames flex under the strain. A gate that twists or drags puts constant force on the gearbox, and gears strip. The fix is either reinforcing the frame and remounting the operator or replacing the gate entirely. We see this exact failure every month in Inglewood, and we can quote both options honestly. Call (877) 610-2993.
Yes. Automatic gates in California must comply with UL 325 entrapment protection standards, which means safety photocells or contact edges that reverse the gate if something blocks its path. Inglewood’s older 1970s and 1980s operators predate these requirements, so retrofitting safety devices often requires replacing the entire control board. We handle the full compliance scope on every install, including the required safety signage, and we don’t leave a gate live unless it reverses on contact. That’s non-negotiable.
Yes. A slide or cantilever gate runs parallel to the driveway instead of swinging into it, so it’s often the best answer for the short front setbacks and narrow driveway widths on Inglewood’s post-WWII homes. We pour a concrete pad, set the track or rollers, and install a rack and pinion drive sized to the gate’s weight and duty cycle. If there’s no room for a gate track at all, we can sometimes use a vertical pivot lift gate instead. Call (877) 610-2993 for a free measure and a written quote.
One More Thing About Inglewood Gates
Every Inglewood gate we install carries the same accountability: Hal Gatewood’s name on the invoice and the 90-Day Done Right Promise in writing. We’re not a chain that subcontracted your job to whoever was available. We’re the people who show up, pour the footings, weld the posts, and answer the phone when you call at 7 a.m. on a Sunday because your gate won’t close. That’s the oldest accountability there is. The name is on the shop, and the shop is down the road.
Call (877) 610-2993 for a free estimate on gate installation in Inglewood, CA. We’ll give you the price before we start, and that’s the price you’ll pay.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Inglewood since 2001.