Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Highland Park
If your automated driveway gate in Highland Park is grinding, stalling, or refusing to open at all, you’re looking for a fix that doesn’t wreck the ornamental ironwork your home was built around. Gate motor repair in Highland Park typically runs $225-$485 for most operator faults, and our crew can usually have a swing or slide gate moving again the same day. We’ve been repairing and replacing gate operators on the estate properties here since 2001, and we answer the phone live 24/7 at (877) 610-2993. The person who shows up will be someone who understands that a 1930s hand-forged gate on Preston Road isn’t a catalog part swap, it’s a piece of the house.
Why Gatewood Fence & Gate Is Highland Park’s Preferred Gate Motor & Opener Company
Hal Gatewood has been fixing gates in the Park Cities since 2001, and the name on the shop is the name on every invoice. What that means in Highland Park specifically: we know the town runs its own building department, we know the deed restrictions exist, and we know that a mismatched hinge face on a Georgian Colonial driveway will get flagged by an inspector, a neighbor, or both. We repair first. When a LiftMaster or FAAC operator on a 1940s Tudor property fails, our first move is treating the gate and post, not condemning the motor to a landfill. The 90-Day Done Right Promise is in writing on every job, not buried in fine print. If something isn’t right after we leave, one call brings Hal back.
We don’t route calls to a call center. A live person answers at (877) 610-2993 any hour. Highland Park customers get background-checked, uniformed people on site, and every estimate is quoted and agreed before work starts. We never roll a truck to your driveway and surprise you with a different number at the door.
Key takeaways:
- Same-day gate motor repair for Highland Park, with live phone answer 24/7
- On-site welding and fabrication, because ornamental ironwork is not a swap-out job
- 90-Day Done Right Promise in writing, $40 off any repair over $200, seniors and veterans save 10% permanently
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule
- Free second opinion on any written estimate; no trip charge inside the county
Our Gate Motor & Opener Services in Highland Park
Motor Installation
Replacing a gate motor in Highland Park isn’t a drop-in task. The heavy custom gates on Lakeside Drive and Armstrong Parkway demand operators sized correctly for their dead weight and travel arc, and the town’s permitting and finish-matching rules mean we plan the job around your existing ironwork. A typical Highland Park swing gate operator installation runs $1,450-$2,800 depending on gate weight, post condition, and whether we’re adding battery backup or intercom integration at the same time.
Motor Repair
Most operator failures on Highland Park estate gates trace back to two things: clay soil shifting the hinge post, or an aging retrofit motor that was never matched to the gate’s real weight. We repair control boards, limit switches, capacitor failures, gearbox strain, and photocell faults on site. You’ll get a written quote before we touch a screw, and most repairs finish in one visit.
Linear Motor
Linear arm operators are common on Highland Park’s heavier swing gates because they apply thrust close to the hinge, where it belongs. We install and repair Linear brand actuators, and we’re certified on Viking and BFT equivalents. When a linear motor is installed right on a properly footed post, that gate moves silently for years. When it’s not, the clutch burns out in one spring of Blackland Prairie heaving.
Slide Motor
Slide gate operators on Highland Park’s wider estate lots, especially along Beverly Drive and the wider setbacks near the Dallas Country Club, take real abuse from wind load and iron gate weight. We replace gearboxes, rack sections, and end stops, and we correct sag before it kills a new motor. A slide operator replacement in Highland Park typically runs $1,600-$3,200 installed, including alignment and safety edge verification.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Highland Park
We stock parts for FAAC, BFT, and Linear operators in our DFW shop, which means less waiting when a Highland Park gate goes down. We also service Viking and LiftMaster units you’ll find on older retrofits across 75205. Since we carry inventory locally rather than ordering every board from a warehouse two weeks out, most Highland Park motor repairs happen in a single trip.
Common Gate Motor & Opener Problems We See in Highland Park Homes
- Clay soil shifts the hinge post. Highland Park sits on expansive Blackland Prairie clay. Spring rains swell the soil, summer drought contracts it, and the post tilts just enough that the rack and pinion misses the motor sprocket. The motor then strains and burns the clutch. We fix the post footing first, not the motor.
- Retrofit motors on 1920s-1950s iron gates never got sized right. A 1947 hand-forged swing gate can weigh 800 pounds. When a previous owner bolted on a generic operator without accounting for that weight, the gearbox overheats and trips the thermal overload. We repair or replace the motor with a unit actually matched to the gate.
- Ice storms freeze interlock mechanisms and snap thin iron scrolls. Dallas-area winter storms are rare but mean when they hit. Interlocks freeze, gates stop mid-cycle, and decorative scrollwork fractures. We handle both the motor repair and the on-site re-forging of damaged iron elements.
- Photocells and safety edges get knocked out of alignment. Highland Park driveways see daily use, and a nicked sensor or shifted edge will lock the gate open or closed. We test the full safety loop, not just the part that set off the trouble.
Pricing for Gate Motor & Opener in Highland Park, TX
Here’s what Highland Park homeowners can expect to pay in 2026. A motor repair on a swing or slide gate runs $225-$485 for most board, capacitor, limit switch, and gearbox faults. Full swing operator replacement with installation runs $1,450-$2,800. Slide operator replacement runs $1,600-$3,200. Adding battery backup runs $450-$900. Intercom integration to your existing gate system runs $350-$1,100 depending on wiring and whether we’re matching a vintage brass call button. Every price gets quoted and agreed in writing before work starts. Estimates are free, and you’ll get a real number from a real person, not a range that becomes a surprise at the door. Call (877) 610-2993.
Highland Park gate motor pricing at a glance:
- Motor repair: $225-$485
- Swing operator replacement (installed): $1,450-$2,800
- Slide operator replacement (installed): $1,600-$3,200
- Battery backup addition: $450-$900
- Intercom integration: $350-$1,100
We Also Serve Cities Near Highland Park
If you’re just across the line, we handle Gate Motor & Opener jobs in University Park, Dallas, Richardson, and Irving as well. Same owner, same live phone answer, same 90-Day Done Right Promise. If you’re in Highland Park proper, this page is all about your streets, your permits, and your gates.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Highland Park
In Highland Park, the usual cause is clay soil swelling after rain and tilting the hinge post, which throws the gate’s rack and pinion out of alignment and forces the motor to work against the bind until it trips. We reset the post footing and realign the rack, then repair any clutch or board damage. Call (877) 610-2993 and we’ll walk the gate with you before quoting anything.
Yes, Highland Park is its own municipality, so gate work goes through the Town of Highland Park’s building department, not Dallas. A motor-only replacement typically needs a permit and must match the existing ornamental ironwork in material and finish. We handle the paperwork and know what the inspectors look for on these properties.
You can absolutely add battery backup to most FAAC, BFT, and Linear operators without altering any visible ironwork or exterior hardware. The backup unit mounts inside the operator housing or a nearby weatherproof enclosure. We’ve done this on several Highland Park estates where the gate has to keep working through storms and outages. Cost runs $450-$900 installed.
Almost always yes. A labored motor on a Highland Park Tudor or Georgian gate usually means the gate’s weight or sag was never corrected for the operator, not that the ironwork is dead. We weld and reinforce on site, reset the post, and replace or rebuild the operator. Fixing the root cause is far cheaper than replacing a one-of-a-kind 1930s gate. A free second opinion on any written estimate is part of how we work.
No. A slide gate operator mounts to the gate and a pad or post beside the driveway track, so your original cobblestone or brick border stays untouched. We can set the new operator on the existing pad or cast a discrete one without ripping out historical driveway material. This is standard practice for the older driveways around Armstrong Parkway and Beverly Drive.
Call Gatewood Fence & Gate for Honest Gate Motor Work in Highland Park
When your Highland Park gate won’t move, you want the person who answers the phone to be the person who knows your street. Hal Gatewood’s name is on the shop, his number has been the same for years, and the 90-Day Done Right Promise applies to every job, including yours. We’ll quote upfront, arrive when we say, and fix the post along with the motor if that’s what it takes. Call (877) 610-2993 now for a free estimate, or to get a live human being on the line right now.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Highland Park since 2001.