Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Fairburn
When a gate motor quits in Fairburn, you don’t have time to sit on hold. A dead operator means your gate is either stuck open, letting anyone in, or stuck closed, boxing you out of your own driveway. We’re Gatewood Fence & Gate, and we’ve been fixing gates since 2001. Hal Gatewood’s name is on the shop, and the person who answers the phone at (877) 610-2993 is a live human being, not a recording. If you’re in the 30213 zip, we’ll get someone out to look at it, quote you a price, and fix it right there in your driveway whenever the parts are on the truck.
Why Gatewood Fence & Gate Is Fairburn’s Preferred Gate Motor & Opener Company
Fairburn is different from the older suburbs up north, and we know it. The subdivisions along Senoia Road, Flat Shoals Road, and Highway 92 went up in a wave during the 2000s and early 2010s, and a lot of those automated entrance gates were installed around the same time, with the same handful of operator models. That means when one goes, three or four more on the same street are usually not far behind. We stock parts for that specific era of LiftMaster and Elite operators because we see them fail in clusters. We don’t have to order a board and make you wait a week. Hal has been running Gatewood Fence & Gate since 2001, he’s licensed, his address is published, and he stands behind every job with our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back. No runaround.
We answer the phone live, 24 hours a day, because a stuck-open gate in Fairburn at 2 a.m. is a real problem, not a voicemail. We’re the Gate Motor & Opener company that will tell you over the phone what’s likely wrong, what it’s likely to cost, and when we’ll be there. And we show up in the window we promised.
Our Gate Motor & Opener Services in Fairburn
Motor Installation
A new gate motor installation in Fairburn runs different according to what you’re hanging it on. A standard single swing gate with a residential operator usually runs $1,400 to $2,200, and a heavier slide gate for a commercial or light industrial property off I-85 or Camp Creek is more like $2,800 to $4,500. We set the posts, mount the operator, run the power, and program the remotes and keypads. The price is quoted and agreed before any work starts, so there’s no surprise at the end.
Motor Repair
Most Fairburn gate motor repairs come down to a few things: a dead control board, fried capacitors from lightning or ice-storm surges, a stripped gear, or limit switches that have lost their setting. We carry boards, capacitors, and gears for the LiftMaster and Elite models that are all over the 30213 zip. A typical board replacement is $350 to $600 including labor. A gear or limit switch fix is usually $180 to $340. We tell you which one it is before we touch a screw, and the price you hear is the price you pay. And remember, if the repair goes over $200, you get $40 off.
Linear Motor
Linear operators are the slide-gate workhorses, and we service the Linear models installed all over the newer industrial parks along the Camp Creek corridor. The most common failure is a stripped drive gear or a failing torque limiter, and it usually shows up first as a gate that starts fine but grinds to a stop halfway down the track. A typical Linear motor repair in Fairburn runs $250 to $500, and we keep the common parts on the truck so we can often fix it same day. If the unit is beyond repair, a replacement Linear motor is $900 to $1,600 installed, depending on gate weight and track condition.
Slide Motor
Slide gates in Fairburn have their own set of problems. They’re usually heavier than swing gates, and when the track gets clogged with red clay runoff or the gate is forced off its rollers, the motor takes a beating. We correct the track, set the rollers, and then tune the motor so it’s not fighting the gate. A typical slide motor replacement in Fairburn is $2,600 to $4,200 for the operator and labor, and we’ll let you know if the track itself needs work before we quote anything. No surprises, written down.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairburn
We’re certified to service nine major gate brands, and the ones we see most in Fairburn are LiftMaster, Elite, DoorKing, Linear, and Viking. We carry parts for them locally, which is a bigger deal than it sounds. When the mid-2000s Elite board fails on a Fairburn HOA gate, we don’t want the whole community waiting a week for a board to ship from out of state. We stock for the operators that are actually installed here. We also work on Ghost Controls, FAAC, BFT, and Mighty Mule systems when they show up.
Common Gate Motor & Opener Problems We See in Fairburn Homes
- Whole subdivisions of 2000s-era LiftMaster and Elite operators failing at once. Fairburn’s HOA building boom along Senoia Road and Flat Shoals Road means dozens of community gates installed with the same operator models are now hitting their 15 to 20 year mark at the same time. We see the same control board failure recur block after block.
- Swing gate posts shifting out of plumb. The red clay under Fairburn expands when wet and contracts when dry, and over a decade that subtle movement pushes brick pillar posts out of alignment. The hinge post moves, the gate sags, and the motor strains harder every cycle until something burns out.
- Welds cracking on ornamental iron gates after ice storms. When a thermal overload trips and the gate sits open during a freeze, the weight distribution shifts and weld joints get brittle. We weld on site, in your driveway, so we can repair the gate without hauling it off.
- Safety photocells from the mid-2000s that have never been upgraded. Many older Fairburn gate operators were installed before current UL 325 entrapment standards were tightened. We retrofit them with current photocells and edge sensors, which matters more than most people realize on a gate that runs through a neighborhood with kids and dogs.
Pricing for Gate Motor & Opener in Fairburn, GA
Here’s what you can expect around Fairburn. A gate motor repair, whether it’s a board, capacitor, or limit switch, usually lands between $180 and $600. A full residential swing gate motor replacement is $1,100 to $2,400. A commercial slide gate operator replacement runs $2,800 to $4,500. The biggest cost factor is the gate’s weight, because the operator has to be sized to it. Every quote is given in writing before any work starts, and what we quote is what you pay. We don’t add “fuel surcharges” or “supply fees” after the fact. If you have a written estimate from another company, we’ll give you a free second opinion on it. Seniors and veterans get 10% off, always.
We Also Serve Cities Near Fairburn
We’re based in Fairburn and work throughout the south metro. If you’re just over the line in Union City, Tyrone, College Park, or Riverdale, the same crew covers you, the same live person answers the phone, and the same 90-Day Done Right Promise applies.
Serving Fairburn, GA - Our Local Coverage Area
We’re based in the Fairburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Fairburn
Fairburn’s building boom in the 2000s and early 2010s meant entire subdivisions along Senoia Road, Flat Shoals Road, and Highway 92 got the same LiftMaster or Elite operators installed within a few years of each other. Those boards have a typical service life of 15 to 20 years, and the whole community hits that wall at roughly the same time. We see entire streets where three or four boards failed in the same year. We stock parts for that specific era of hardware so we can usually repair rather than replace. Call (877) 610-2993 and we can tell you over the phone whether your board is one of the common failures.
Usually yes. The older mid-2000s operators often lack the photo eyes, edge sensors, and audible alarms that current UL 325 standards require, but the motors and gearboxes are often still fine. We can add safety photocells, wireless edge sensors, and the required warning placards to bring the gate into compliance. If the operator itself is too far gone, we’ll tell you straight, because sometimes a retrofit costs more than a new operator that already has the safety features integrated. Either way, you’ll get a written price before anything is done.
Almost certainly. The red clay soil under Fairburn expands and contracts through wet and dry seasons, and over the years that movement tips brick pillar posts out of plumb. The gate hangs lower, puts all its weight on the motor, and eventually the operator burns out. The fix starts with the post, not the motor. We correct the post alignment, rebuild the hinge, and then tune the motor so it isn’t fighting the gate anymore. Fix the panel without the post and you’ll fix it twice.
Ice storms do two things to Fairburn gates. First, power surges from lines coming down can fry the control board, which is why we recommend a surge protector on any gate operator. Second, when the thermal overload trips and the gate is left in the open position during a freeze, the weight distribution changes and the ornamental iron welds crack. A gate that closes fine before the storm can be split at the weld joint after it. We weld on site, so we can repair those cracks without removing the gate from the property.
Yes. We keep boards, gears, capacitors, and limit switches for the LiftMaster and Elite models that went into Fairburn’s mid-2000s subdivisions. That’s a deliberate choice, because we know from years of working this market that those operators fail in waves. When your HOA gate or your own driveway gate goes down, we’d rather hand the part to Hal than put you on a waiting list for a shipment. One call to (877) 610-2993 and we’ll tell you if we have it on the truck today.
Straight Answers, Honest Work, and a Name You Can Hold Accountable
On Senoia Road, we replaced a mid-2000s LiftMaster swing gate operator at a brick-pillar HOA entrance whose control board had failed after repeated ice-storm power surges. The gate had sagged at the hinge post from red-clay soil movement, so we corrected the post alignment, upgraded it to a current UL 325-compliant operator with safety photocells, and integrated the existing keypad entry so residents didn’t have to relearn anything. That’s the kind of job we do all over Fairburn, and it’s the reason people keep our number in their phone.
We’re not a national company with a call center three states away. Hal Gatewood has been fixing gates since 2001, his address is published, and his name is on every invoice and every truck. The 90-Day Done Right Promise is written on every job, not buried in fine print. If something isn’t right, you call and we come back. That’s the whole promise.
If your gate motor is down in Fairburn, call (877) 610-2993. A live person answers. We’ll set a time, show up, and give you a written price before we do anything. Free estimates, no trip charge inside the county, and $40 off any repair over $200. You can drive to the shop and look us in the eye if you’d rather. We’re not hard to find.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fairburn since 2001.