Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fairburn
A new driveway gate in Fairburn typically runs $2,800 to $7,500 installed, depending on whether you’re adding automation, the gate’s width and material, and what’s already in the ground for power. We work in Fairburn every week, so we know the 30213 subdivisions off Senoia Road, Flat Shoals Road, and Highway 92 better than most shops. If you’re in Fairburn and need a gate installed, retrofitted with an opener, or replaced, call (877) 610-2993 and you’ll get Hal or one of his crew on the line, not a machine.
Why Gatewood Fence & Gate Is Fairburn’s Preferred Gate Installation Company
Hal Gatewood started this shop in 2001, and he still puts his name on every invoice. That matters in Fairburn because the work here has a specific pattern: whole neighborhoods built in the 2000s are now hitting the same gate failures at the same time. We’ve seen it enough that we stock parts for the exact operator models those builders used, so we’re not ordering from a warehouse and making you wait a week.
Our local reputation in Fairburn is built on showing up when we say we will and charging what we quoted. If you’ve been burned by a company that quoted one number on the phone and handed you a different invoice at the door, you’ll notice the difference immediately. We’re licensed and insured, Hal’s address is published, and the 90-Day Done Right Promise is in writing on every job. One call brings us back, no runaround.
A live person answers our phone 24 hours a day, 7 days a week. That’s not a call center three states away. It’s the shop. When you call about a gate in Fairburn, you’re talking to someone who actually knows where Fairburn is and what the red clay does to post footings.
Our Gate Installation Services in Fairburn
Sliding Gate Installation
Sliding gates are common in Fairburn’s HOA subdivisions and along the I-85 and Camp Creek corridor, where newer industrial buildings need heavy-duty commercial slide gates. A proper sliding gate installation starts with the track and cantilever rollers, not the panel. We set the footing in reinforced concrete, account for Fairburn’s expansive red clay, and make sure the gate rolls square on day one and stays that way. Most Fairburn sliding gate installations run $3,200 to $8,000 with automation.
Swing Gate Installation
Swing gates in Fairburn are usually mounted on brick pillar posts at the entry of 2000s-era subdivisions. The failure mode we see most is a post that’s shifted out of plumb because the footing was poured too shallow in clay that swells and shrinks with every wet and dry cycle. We set new footings below the frost line and use reinforced concrete, then mount the hinge post so the gate hangs true. A single swing gate with opener in Fairburn typically runs $2,800 to $5,500.
Double Gate Installation
Double gates, also called bi-parting gates, are the standard for wider Fairburn driveways in newer subdivisions off Highway 92 and Flat Shoals Road. When both panels meet, they have to close squarely, which means both posts and the center alignment have to be dead on. We see a lot of Fairburn double gates where one post has moved and the panels no longer meet. Proper installation runs from $4,500 up to $9,000, depending on materials and automation.
Pedestrian Gate Installation
Pedestrian gates in Fairburn often go in alongside the main driveway gate or as a separate side-yard entrance. They’re simpler, but they still need a proper concrete post support, especially in clay soil. A Fairburn pedestrian gate with hardware and installation typically runs $900 to $2,400. We build them to match the style of your existing driveway gate, whether that’s ornamental iron or aluminum.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairburn
We’re certified to service nine major gate brands, including Viking, Ghost Controls, DoorKing, and Elite. That covers most of the operators and hardware in Fairburn’s HOA communities, which heavily use mid-2000s LiftMaster and Elite units. Because we know those specific models fail in predictable ways, we keep the boards, remotes, and safety parts on hand for Fairburn jobs. Call us at (877) 610-2993 with the model number from your opener and we’ll tell you over the phone whether we can bring the part with us the same day.
Common Gate Installation Problems We See in Fairburn Homes
- Builder-grade operators failing across entire Fairburn HOAs at the same time. The mid-2000s subdivisions along Senoia Road and Flat Shoals Road often used the same operator models on every home. The control boards were undersized and rarely had surge protection, so a Georgia storm takes out ten gates in one neighborhood in a single night.
- Post footings shifted in expansive red clay. Fairburn’s clay soil swells when wet and shrinks when dry, and over 10 to 15 years, that movement pushes gate posts out of plumb. You can adjust the panel a hundred times, but if the post is moving, the gate will never close right. Fix the post and you fix it once.
- Manual gates with no conduit or power stub. Many Fairburn homes built in the 2000s got a manual ornamental iron gate at the driveway, but the builder never ran conduit or left a power stub. Adding automation later means trenching under the driveway or routing power along the fence line. We do that work, and we quote it before we start.
- HOA entrance gates with failing entrapment protection. Community gates in Fairburn’s master-planned subdivisions are usually required to have working photocells, edge sensors, and loop detectors. When those systems age out, the gate either won’t close or becomes a safety hazard. We bring them up to current UL 325 compliance, which Fairburn HOAs increasingly require in writing.
Pricing for Gate Installation in Fairburn, GA
A typical gate installation in Fairburn costs between $2,800 and $9,000, and most jobs fall in the $3,500 to $6,500 range when automation is included. Here’s the line-item breakdown we quote from:
- Pedestrian gate, manual: $900 to $2,400
- Swing gate with opener: $2,800 to $5,500
- Sliding gate with opener: $3,200 to $8,000
- Double swing gate with opener: $4,500 to $9,000
- Power run and conduit (if not already installed): $400 to $1,800
- Post removal and new reinforced footing: $600 to $2,000 per post
Every quote is written and agreed before any work starts. You’ll never get a surprise invoice at the end. We also offer $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (877) 610-2993 for an exact quote on your Fairburn gate.
We Also Serve Cities Near Fairburn
Our service area covers Fairburn and the surrounding communities, including Union City, Tyrone, College Park, and Riverdale. If you’re just outside the 30213 zip, call us anyway. The Gate Installation crew is in this corridor regularly, and a live person will tell you honestly whether we can get to you this week.
Serving Fairburn, GA - Our Local Coverage Area
We’re based in the Fairburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Fairburn
They fail together because the mid-2000s builder installed the same LiftMaster or Elite operator model on every home in those subdivisions, and those operators age on the same timeline. The control boards were built to a price, not a spec, and most had no surge protection. When one fails, the others in the neighborhood are usually close behind. We keep parts for that specific era of hardware in stock precisely because Fairburn has this density problem. If yours has started acting up, call (877) 610-2993 before it quits entirely.
Yes, but it usually requires trenching a power run from the house or the nearest outdoor outlet. Many Fairburn homes built in the 2000s got a manual gate without conduit stubbed in, so the first step is running dedicated power and, if you want entrapment protection, a low-voltage line for the photocell and edge sensors. We handle the trenching, the conduit, the operator, and the programming as one job with one written quote. The power run itself typically runs $400 to $1,800 depending on distance and whether we’re crossing concrete.
It’s the hinge post shifting in Fairburn’s expansive red clay. That soil shrinks and swells with every wet and dry season, and a footing poured too shallow will move within 10 to 15 years. The panel gets blamed but the post is the problem. We reset the post in a deeper, reinforced footing, and then the gate hangs true. Fix the panel without the post and you’ll fix it twice. Call us for a free assessment if your Fairburn gate is dragging or leaving a gap at the latch.
Yes. Any automated gate in Fairburn must comply with UL 325, which means monitored entrapment protection: photocells on the gate path, edge sensors or a reversing mechanism, and a way to stop and reverse the gate when something is in the opening. Fairburn HOAs are increasingly writing this requirement into their covenants, so newer community gates get inspected. We install to the current standard on every job, and we bring existing gates up to code when we’re already on site.
They usually do. Those buildings use heavier cantilever slide gates that don’t roll on a track across the opening, and the operators are industrial-grade rather than residential. The footings are bigger, the panel is heavier, and the safety loops often cover vehicle detection on both sides. We install and service those systems in Fairburn, including gate access control with keypads, card readers, and vehicle loops. If you manage a warehouse or light industrial property in this corridor, call (877) 610-2993 for a written quote.
For a repair, we can usually get to Fairburn the same day or the next morning. For a full gate installation, we schedule a free measure and written quote first, then set the install date based on materials and weather. Either way, a live person answers the phone 24/7, and you’ll know exactly when we’re coming. Call (877) 610-2993.
If your Fairburn gate is sagging, won’t close, or was never built with automation in mind, call us. Hal has been doing this since 2001, his name is on the shop, and the 90-Day Done Right Promise is on every invoice. Estimates are free, the price is agreed before work starts, and the phone gets answered by a real person. Call (877) 610-2993 now.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fairburn since 2001.